Datasheet Technical Bulletin 3D 모델

TX1 Push-Pull Transformers

for Texas Instruments SN6507 Push Pull Driver

Optimized for Texas Instrument SN6507 transformer driver
Low profile and center-tapped push-pull transformers for isolated power supply
High Frequency Operation up to 1 MHz
2500 Vrms, one minute high isolation (hipot) winding to winding
Exceptional efficiency
See the AEC qualified TX2 for a significantly higher isolation voltage and higher creepage and clearance.

Click to enlarge

지금 구매:

부품 번호

내 부품 찾기

개수	단품 가격
1	$5.46
150	$4.46
300	$3.34
600	$2.01

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

Termination

E = Tin-silver over tin over nickel over phos bronze

Packaging

D = 13" machine-ready reel

. 재고 보유 중, 당일 발송 가능.

샘플 신청:

부품 번호

내 부품 찾기

통상적인 적용 분야

Texas Instruments SN6507와(과) 호환

부품 번호	일차 전압	이차 전압	전력 1	FSW
TX1-ZB1445-CED	12 V	15 V	7.5 W	1000 kHz
TX1-ZC1892-AED	12 V	30 V	15 W	1000 kHz
TX1-ZB1459-BED	24 V	15 V	7.5 W	1000 kHz
TX1-ZC1891-AED	24 V	30 V	15 W	1000 kHz

사양

Electrical specifications at 25°C.

부품 번호 (Hover for schematics)	인덕턴스 @ 0A (µH) 2	DCR max (Ω) 3		누설 인덕턴스 최대 (µH) 4	권수비	전압시간적 (V-µs) 5	절연 전압 (Vrms) 6	회로도
부품 번호 (Hover for schematics)	인덕턴스 @ 0A (µH) 2	Pri	Sec	누설 인덕턴스 최대 (µH) 4	Pri : Sec	전압시간적 (V-µs) 5	절연 전압 (Vrms) 6	회로도
TX1-ZB1445-CED	99.7	0.087	0.135	0.25	1 : 1.4	22	2500	tx1s
TX1-ZC1892-AED	99.7	0.102	0.240	1.0	1 : 2.8	22	2500	tx1s
TX1-ZB1459-BED	196.0	0.115	0.098	1.0	1 : 0.71	30	2500	tx1s
TX1-ZC1891-AED	196.0	0.134	0.163	1.0	1 : 1.43	30	2500	tx1s

메모

Calculated Output Power will vary depending upon application.
Inductance is for the primary, measured between pins 4 and 1 with pins 2 and 3 connected at 1 MHz, 0.1 Vrms, 0 Adc.
DCR is per winding.
Leakage inductance is for the primary with both windings connected in series and with the secondary windings shorted.
Volt-time product is for the primary, between pins 4 and 1 with pins 2 and 3 connected.
2500 Vrms, one minute isolation (hipot) between primary and secondary windings.

종단 처리:

RoHS-compliant. 260°C compatible. RoHS tin-silver over tin over nickel over phos bronze. Other terminations available at additional cost.

패키지:

600/13″ reel. Plastic tape: 24 mm wide, 0.37 mm thick, 16 mm pocket spacing, 6.1 mm pocket dept.

환경

환경:

RoHS 준수 , 할로겐 프리

주변 온도 범위:

–40°C to +125°C

보관 온도 범위:

Component: –40°C to +125°C
Tape and reel packaging: –40°C to +80°C

최고 부품 온도:

+165°C (ambient + temperature rise)

고장 비율(FIT) / 평균 고장률(MTBF):

See FIT/MTBF Calculations

회로도

Connect pin 2 to 3 and pin 6 to 7 on the PC board.

물리적 특성

테이프 및 릴 사양

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)						Orientation
13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
600	330	100	13	30,4	24,4	24	16	4	2	6,1	0,37

일반 사양

코어 소재:

Ferrite

중량:

0.91 – 1.1 g

패키지:

600 per reel, 13″ reel Plastic tape: 24 mm wide, 0.37 mm thick, 16 mm pocket spacing, 6.1 mm pocket depth

납땜/세척

수분 민감도(MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

납땜 열 내성:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.

PCB 세척:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

창고

언어 설정

통화 설정

TX1 Push-Pull Transformers

for Texas Instruments SN6507 Push Pull Driver

Measured Efficiency vs. Output Power for SN6507

선택한 구성 공급 불가

통상적인 적용 분야

사양

종단 처리:

패키지:

회로도

물리적 특성

테이프 및 릴 사양

일반 사양

납땜/세척

경고