Datasheet 3D 모델

HP4 Series

Hexa-Path Magnetics

Six 1 : 1 isolated windings that can be connected in series or parallel
Tightly coupled windings
500 Vrms isolation between each winding
UL1446 Class F (155°C) Insulation System (UL File E83628)
Power range: 5 – 50 Watts as inductor and flyback transformer;
up to 150 Watts as forward transformer
Frequency range up to 1 MHz

지금 구매:

부품 번호

내 부품 찾기

개수	단품 가격
1	$7.87
100	$7.16
200	$3.52
600	$3.07
1000	$2.87
2400	$2.80
5000	$2.69

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

Termination

L = Tin-silver over tin over nickel

Packaging

D = 13" machine-ready reel

. 재고 보유 중, 당일 발송 가능.

샘플 신청:

부품 번호

내 부품 찾기

사양

Electrical specifications at 25°C.

부품 번호 1	인덕턴스 (µH) 2	허용 오차 (%)	DCR max (mΩ) 3	전압시간적 (V-µs) 4	피크 에너지 저장량 (µJ) 5	Isat (A) 6	Irms (A) 7
HP4-0047L_	3.8	5	55.0	47.3	490	3.2	1.9
HP4-0060L_	4.9	10	55.0	47.3	386	2.5	1.9
HP4-0075L_	6.1	15	55.0	47.3	307	2.0	1.9
HP4-0140L_	11	20	55.0	47.3	142	1.0	1.9
HP4-1150L_	93	25	55.0	47.3	Note 8	Note 8	1.9
HPH4-0047L_	7.9	5	78.0	68.3	529	2.3	1.7
HPH4-0060L_	10	10	78.0	68.3	368	1.7	1.7
HPH4-0075L_	13	15	78.0	68.3	314	1.4	1.7
HPH4-0140L_	24	20	78.0	68.3	138	0.68	1.7
HPH4-1150L_	194	25	78.0	68.3	Note 8	Note 8	1.7

메모

When ordering, please specify packaging code: e.g. HPH1-1400LD
Inductance is per winding, measured at 100 kHz, 0.1 Vrms, 0 Adc.
DCR is per winding, measured at 25°C on Cambridge Technology micro-ohmmeter or equivalent. For other operating temperatures,use this DCR at Temperature calculator.
Volt-time product is for a single winding or multiple windings connected in parallel. To calculate volt-time product for windings connected in series, multiply the value specified in the table by the number of windings connected.
Peak energy storage is for any combination of windings, assuming saturation current applied. See note 6 for definition of saturation current.
Isat: DC current at which the inductance drops 30% typ from its value without current, based on current applied to all six windings connected in series. For applications where all windings are not connected in series, use the following equation to calculate Isat: Isat = Isat(table) × 6 ÷ number of windings in series.
Irms: Current that causes a 40°C rise from 25°C ambient due to self heating, tested with continuous current flow through all windings connected in series. Application temperature rise will depend on the operating current, duty cycle, and winding connection.
Part is designed exclusively for use as a forward converter transformer and was not tested for energy storage and saturation current.

종단 처리:

L = RoHS compliant tin-silver over tin over nickel over phos bronze.
T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
S = non-RoHS tin-lead (63/37). (Special order, added cost)

패키지:

D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.

환경

환경:

RoHS 준수

주변 온도 범위:

−40°C to +85°C with Irms current

보관 온도 범위:

Component: −40°C to +125°C
Packaging tape and reel or tray: −40°C to +80°C

최고 부품 온도:

+125°C (Ambient + temperature rise)

고장 비율(FIT) / 평균 고장률(MTBF):

See FIT/MTBF Calculations

물리적 특성

테이프 및 릴 사양

	Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)						Orientation
	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T	Orientation
HP4 / HPH4	200	330	100	13	50.4	44.4	44	24	4	2	10.56	0.4

일반 사양

코어 소재:

Ferrite

중량:

6.8 – 7.5 g

패키지:

200 per 13" reel

납땜/세척

수분 민감도(MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

납땜 열 내성:

Three reflows at >217°C for 90 seconds (+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room temperature between.

납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.

PCB 세척:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

HP4 Series

Hexa-Path Magnetics

사양

종단 처리:

패키지:

물리적 특성

테이프 및 릴 사양

일반 사양

납땜/세척

관련 제품 시리즈

HP1 Series

HP2 Series

HP3 Series

HP5 Series

HP6 Series

창고

언어 설정

통화 설정

HP4 Series

Hexa-Path Magnetics

선택한 구성 공급 불가

사양

종단 처리:

패키지:

물리적 특성

테이프 및 릴 사양

일반 사양

납땜/세척

관련 제품 시리즈

HP1 Series

HP2 Series

HP3 Series

HP5 Series

HP6 Series

경고