Datasheet 3D 모델

HPH3-0138

Name: HPH3-0138LD
Brand: Coilcraft
SKU: HPH3-0138LD
Price: 2.80 USD
Availability: InStock

HPH3-0138LD

부품에 대한 추가 정보 및 사양.

시리즈로 이동

지금 구매:

개수	단품 가격
1	$6.26
100	$5.53
200	$3.39
400	$2.99
1000	$2.80
2400	$2.62
5000	$2.43

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

Termination

L = Tin-silver over tin over nickel

Packaging

D = 13" machine-ready reel

. 재고 보유 중, 당일 발송 가능.

샘플 신청:

사양

Electrical specifications at 25°C.

부품 번호 1	인덕턴스 (µH) 2 (허용 오차: ±20%)	DCR max (mΩ) 3	전압시간적 (V-µs) 4	피크 에너지 저장량 (µJ) 5	Isat (mA) 6	Irms (A) 7
HPH3-0138L_	24	125	43.9	52.5	420	1.1

메모

When ordering, please specify packaging code: e.g. HPH1-1400LD
Inductance is per winding, measured at 100 kHz, 0.1 Vrms, 0 Adc.
DCR is per winding, measured at 25°C on Cambridge Technology micro-ohmmeter or equivalent. For other operating temperatures,use this DCR at Temperature calculator.
Volt-time product is for a single winding or multiple windings connected in parallel. To calculate volt-time product for windings connected in series, multiply the value specified in the table by the number of windings connected.
Peak energy storage is for any combination of windings, assuming saturation current applied. See note 6 for definition of saturation current.
Isat: DC current at which the inductance drops 30% typ from its value without current, based on current applied to all six windings connected in series. For applications where all windings are not connected in series, use the following equation to calculate Isat: Isat = Isat(table) × 6 ÷ number of windings in series.
Irms: Current that causes a 40°C rise from 25°C ambient due to self heating, tested with continuous current flow through all windings connected in series. Application temperature rise will depend on the operating current, duty cycle, and winding connection.
Part is designed exclusively for use as a forward converter transformer and was not tested for energy storage and saturation current.

종단 처리:

L = RoHS compliant tin-silver over tin over nickel over phos bronze.
T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
S = non-RoHS tin-lead (63/37). (Special order, added cost)

패키지:

D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.

환경

환경:

RoHS 준수

주변 온도 범위:

−40°C to +85°C with Irms current

보관 온도 범위:

Component: −40°C to +125°C
Packaging tape and reel or tray: −40°C to +80°C

최고 부품 온도:

+125°C (Ambient + temperature rise)

고장 비율(FIT) / 평균 고장률(MTBF):

See FIT/MTBF Calculations

물리적 특성

테이프 및 릴 사양

	Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)						Orientation
	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T	Orientation
HP3 / HPH3	200	330	100	13	50.4	44.4	44	28	4	2	9.6	0.4

일반 사양

코어 소재:

Ferrite

중량:

4.2 – 4.6 g

패키지:

200 per 13" reel

납땜/세척

수분 민감도(MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

납땜 열 내성:

Three reflows at >217°C for 90 seconds (+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room temperature between.

납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.

PCB 세척:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

HPH3-0138

HPH3-0138LD

사양

종단 처리:

패키지:

물리적 특성

테이프 및 릴 사양

일반 사양

납땜/세척

관련 제품

HP3-0047

HP3-0055

HP3-0084

HP3-0138

HP3-0950

HPH3-0047

HPH3-0055

HPH3-0084

HPH3-0950

관련 제품 시리즈

HP1 Series

HP2 Series

HP4 Series

HP5 Series

HP6 Series

창고

언어 설정

통화 설정

HPH3-0138

HPH3-0138LD

이 부품 공유

선택한 구성 공급 불가

사양

종단 처리:

패키지:

물리적 특성

테이프 및 릴 사양

일반 사양

납땜/세척

관련 제품

HP3-0047

HP3-0055

HP3-0084

HP3-0138

HP3-0950

HPH3-0047

HPH3-0055

HPH3-0084

HPH3-0950

관련 제품 시리즈

HP1 Series

HP2 Series

HP4 Series

HP5 Series

HP6 Series

경고