3D Model Datasheet Spice 모델 SPICE S-Param

0402PA (1005)

High Current Ceramic Chip Inductors

Our 0402PA Series offers excellent current handling – up to 1860 mA – making them ideal for power amplifiers in wireless applications. Very low DCR and very high self-resonant frequencies round out the features for this series.

Designed for power amplifier applications
Exceptionally low DCR
Excellent current handling – up to 1860 mA
Very high self-resonant frequencies – up to 15.2 GHz

지금 구매:

부품 번호

내 부품 찾기

개수	단품 가격
1	$1.19
200	$0.86
500	$0.58
1000	$0.41
2000	$0.30
4000	$0.24
10000	$0.19

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

Tolerance

J = 5%

Termination

R = Matte Sn over Ni over Ag-Pt-glass frit

Packaging

W = 7" machine-ready reel

. 재고 보유 중, 당일 발송 가능.

샘플 신청:

부품 번호

내 부품 찾기

설계자용 키트:

키트	값	가격
C373	7 (20 of each)	$40.00

사양

Electrical specifications at 25°C.

부품 번호 1	인덕턴스 (nH) 2	허용 오차 (%) 3	900 MHz		1.7 GHz		SRF min (GHz) 5	DCR max (Ω) 6	Irms (mA) 7
부품 번호 1	인덕턴스 (nH) 2	허용 오차 (%) 3	L typ	Q typ 4	L typ	Q typ 4	SRF min (GHz) 5	DCR max (Ω) 6	Irms (mA) 7
0402PA-0N8XJR_	0.78	5	0.79	35	0.76	55	15.2	0.018	1860
0402PA-1N9X_R_	1.9	2,5	1.83	50	1.81	73	12.5	0.022	1700
0402PA-3N4X_R_	3.4	2,5	3.36	51	3.33	93	7.2	0.030	1500
0402PA-3N5X_R_	3.5	2,5	3.51	58	3.55	82	8.8	0.035	1400
0402PA-5N8X_R_	5.8	2,5	5.76	56	5.7	83	5.5	0.045	1300
0402PA-6N2X_R_	6.2	2,5	6.17	57	6.28	81	5.0	0.055	1150
0402PA-8N2X_R_	8.2	2,5	8.15	58	8.19	82	4.7	0.060	1100

메모

When ordering, specify tolerance, termination and packaging codes: 0402PA-8N2XJRW
Inductance measured at 250 MHz using a Coilcraft SMD-F test fixture and Coilcraft-provided correlation pieces with an Agilent/HP 4286 impedance analyzer.
G = 2%, J = 5%
Q measured using an Agilent/HP 4291A with an Agilent/HP 16193 test fixture.
For SRF > 6 GHz, measured using an Agilent/HP 8722ES network analyzer and a Coilcraft SMD-D test fixture. For SRF < 6 GHz, measured using an Agilent/HP 8753D network analyzer and a Coilcraft SMD-D test fixture.
6. DCR measured on a micro-ohmmeter
Current that causes a 15°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.

종단 처리:

R = RoHS compliant. Matte Sn over Ni over Ag-Pt-glass frit terminations.

T = RoHS Sn/Ag/Cu (95.5/4.0/0.5) (Special order, added cost)
S = Not RoHS Sn/Pb (63/37) (Special order, added cost)

패키지:

W = 7″ machine-ready reel. EIA-481 punched paper tape (2000 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
Y = 7″ machine-ready reel. EIA-481 punched paper tape. Factory order only, not stocked (10000 parts per full reel).
U = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from U to W.

환경

환경:

RoHS 준수 , 할로겐 프리

주변 온도 범위:

–40°C to +125°C with Irms current

보관 온도 범위:

Component: –40°C to +140°C.
Tape and reel packaging: –40°C to +80°C

최고 부품 온도:

+140°C (ambient + temp rise).

고장 비율(FIT) / 평균 고장률(MTBF):

See FIT/MTBF Calculations

성능 곡선

L vs Frequency

Q vs Frequency

물리적 특성

A max	B max	C max	D ref	E	F	G	H	I	J
0.047	0.025	0.026	0.010	0.020	0.009	0.022	0.026	0.014	0.018	inches
1,19	0,64	0,66	0,25	0,51	0,23	0,56	0,66	0,36	0,46	mm

Height dimension (C) is before optional solder application.
For maximum height dimension including solder, add 0.006 in / 0,152 mm.

테이프 및 릴 사양

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)
7" (178 mm)	A	B	C	D	E	W	P	Po	P1	H	T
2000	178	100	13	14,4	8,4	8	2	4	2	NA	0,68
10000*	178	100	13	14,4	8,4	8	2	4	2	NA	0,68

* Special order

일반 사양

코어 소재:

Ceramic

중량:

0.9 – 1.1 mg

패키지:

2000 or 10000 per 7″ reel. Paper tape: 8 mm wide, 0.68 mm thick, 2 mm pocket spacing

Temperature coefficient of inductance:

+25 to +125 ppm/°C

납땜/세척

수분 민감도(MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

납땜 열 내성:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.

PCB 세척:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info

0402PA (1005)

High Current Ceramic Chip Inductors