3D Model Datasheet

0201HT (0603)

Low Profile Chip Inductor

The 0201HT is the industry’s lowest profile 0201-sized (metric 0603) chip inductor with a maximum height of just 0.28 mm. It has significantly higher Q and lower DCR than similarly sized thin-film types and is optimized for high-frequency impedance matching in applications such as cell phones, wearable devices, WiFi, Bluetooth, GPS and LTE/5G IoT networks.

0201 sized inductor with low-profile 0.28 mm maximum height
Excellent Q compared to non-wirewound alternatives at this height
Very high SRF – as high as 36 GHz

지금 구매:

부품 번호

내 부품 찾기

개수	단품 가격
1	$1.22
100	$0.86
500	$0.60
1000	$0.48
2000	$0.41
5000	$0.35

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

Tolerance

K = 10%

Termination

R = Matte tin over nickel over silver-glass frit

Packaging

W = 7" machine-ready reel

. 재고 보유 중, 당일 발송 가능.

샘플 신청:

부품 번호

내 부품 찾기

설계자용 키트:

키트	값	가격
C520	14 (20 of each)	$70.00

사양

Electrical specifications at 25°C.

부품 번호 1	인덕턴스 (nH) 2 (허용 오차: ± 10%)	900 MHz	1.7 GHz	2.4 GHz	SRF typ (GHz) 4	DCR max (mΩ) 5	Irms (mA)
부품 번호 1	인덕턴스 (nH) 2 (허용 오차: ± 10%)	Q typ 3	Q typ 3	Q typ 3	SRF typ (GHz) 4	DCR max (mΩ) 5	at 25°C 6	at 85°C 7	at 125°C 8
0201HT-0N5XKR_	0.50	31	45	60	36.0	45	650	300	180
0201HT-1N2XKR_	1.2	34	51	69	22.0	80	490	300	180
0201HT-2N2XKR_	2.2	31	45	57	15.0	120	440	300	180
0201HT-2N4XKR_	2.4	30	45	57	14.0	140	400	240	140
0201HT-3N3XKR_	3.3	32	49	62	13.0	150	380	300	180
0201HT-3N6XKR_	3.6	30	46	58	12.0	190	340	240	140
0201HT-4N7XKR_	4.7	33	51	65	10.5	190	340	300	180
0201HT-5N1XKR_	5.1	31	47	58	10.0	235	280	240	140
0201HT-5N6XKR_	5.6	29	43	52	9.0	290	280	190	100
0201HT-6N8XKR_	6.8	30	45	55	8.5	280	250	240	140
0201HT-7N5XKR_	7.5	30	46	56	8.5	450	200	170	90
0201HT-9N1XKR_	9.1	32	48	56	7.5	330	240	240	140
0201HT-11NXKR_	11	31	47	55	7.0	475	200	190	100
0201HT-13NXKR_	13	30	44	50	6.3	520	190	190	100

메모

When ordering, please specify packaging code: e.g. 0201HT-13NXKRW
Inductance measured at 250 MHz using a Coilcraft SMD-F fixture in an Agilent/HP 4287 impedance analyzer with Coilcraft-provided correlation pieces.
Q measured using an Agilent/HP 4991A with an Agilent/HP 16197 test fixture.
SRF measured using an Agilent/HP 8722ES network analyzer and a Coilcraft SMD-D test fixture. Details
DCR measured on a micro-ohmmeter and a Coilcraft CCF858 test fixture. For other operating temperatures, use this DCR at Temperature calculator.
Irms: Current that cause 15°C rise at 25°C. This information is for reference only and does not represent absolute maximum ratings.
Maximum current that can be applied at 85°C.
Maximum current that can be applied at 125°C.

종단 처리:

RoHS compliant matte tin over nickel over silver-glass frit.

패키지:

W = 7″ machine-ready reel. EIA-481 punched paper tape (2000 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
Y = 7″ machine-ready reel. EIA-481 punched paper tape. Factory order only, not stocked (10000 parts per full reel).

환경

환경:

RoHS 준수 , 할로겐 프리

주변 온도 범위:

−40°C to +125°C with Irms current

보관 온도 범위:

Component: −40°C to +140°C
Tape and reel packaging: −40°C to +80°C

최고 부품 온도:

+140°C (Ambient + temperature rise)

고장 비율(FIT) / 평균 고장률(MTBF):

See FIT/MTBF Calculations

성능 곡선

L vs Frequency

Impedance vs Frequency

물리적 특성

A max	B max	C max	D	E	F	G	H
0.023	0.018	0.011	0.004	0.015	0.008	0.00095	0.0195	inches
0,58	0,46	0,28	0,10	0,38	0,20	0,24	0,50	mm

테이프 및 릴 사양

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)
7" (178 mm)	A	B	C	D	E	W	P	Po	P1	H	T
2000	178	100	13	14,4	8,4	8	2	4	2	0,28	0,42
10000*	178	100	13	14,4	8,4	8	2	4	2	0,28	0,42

* Special order

일반 사양

코어 소재:

Ceramic

중량:

0.14 - 0.24 mg

패키지:

2000 or 10,000 per 7″ reel; Paper tape: 8 mm wide, 0.42 mm thick, 2 mm pocket spacing

Temperature coefficient of inductance:

+25 to +150 ppm/°C

납땜/세척

수분 민감도(MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

납땜 열 내성:

Three reflows at >217°C for 90 seconds (+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room temperature between.

납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.

PCB 세척:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

0201HT (0603)

Low Profile Chip Inductor