3D Model Datasheet

0201CT (0603)

Low Profile Chip Inductors

Measuring just 0.58 x 0.46 x 0.35 mm, the 0201CT Series is a low profile wirewound chip inductor in an 0201 (metric 0603) size. It has exceptionally higher Q and lower DCR than similarly sized thin-film types and is optimized for high-frequency impedance matching in applications such as cell phones, wearable devices, WiFi, Bluetooth, GPS and LTE/5G IoT networks.

0201 sized inductor with low-profile 0.35 mm maximum height
Excellent Q compared to non-wirewound alternatives at this height
Very high SRF – as high as 35.2 GHz
AEC-Q200 Grade 1 (–40°C to +125°C)

지금 구매:

부품 번호

내 부품 찾기

개수	단품 가격
1	$1.47
200	$1.03
500	$0.72
1000	$0.58
2000	$0.48
4000	$0.42

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

Tolerance

K = 10%

Termination

R = Matte tin over nickel over silver-glass frit

Packaging

W = 7" machine-ready reel

. 재고 보유 중, 당일 발송 가능.

샘플 신청:

부품 번호

내 부품 찾기

설계자용 키트:

키트	값	가격
C519	14 (20 of each)	$70.00

사양

Electrical specifications at 25°C.

부품 번호 1	인덕턴스 (nH) 2	허용 오차 (%) 3	900 MHz	1.7 GHz	2.4 GHz	SRF typ (GHz) 5	DCR max (mΩ) 6	Irms (mA)
부품 번호 1	인덕턴스 (nH) 2	허용 오차 (%) 3	Q typ 4	Q typ 4	Q typ 4	SRF typ (GHz) 5	DCR max (mΩ) 6	at 25°C 7	at 85°C 8	at 125°C 9
0201CT-0N6XKR_	0.60	10	28	41	53	35.2	60	700	240	140
0201CT-1N5XKR_	1.5	10	27	40	49	20.3	130	460	190	100
0201CT-2N4XKR_	2.4	10	34	53	66	15.8	130	470	300	180
0201CT-4N7XKR_	4.7	10	34	52	61	9.6	210	360	240	140
0201CT-5N1XKR_	5.1	10	30	42	48	9.2	330	290	170	90
0201CT-5N6XKR_	5.6	10	35	48	56	9.8	210	360	300	180
0201CT-6N2XKR_	6.2	10	35	48	55	8.7	210	360	300	180
0201CT-6N8XKR_	6.8	10	32	43	48	8.0	270	340	240	140
0201CT-7N5XKR_	7.5	10	30	41	47	7.9	500	290	140	70
0201CT-8N2XKR_	8.2	10	35	48	54	7.7	260	330	300	180
0201CT-9N1XKR_	9.1	10	33	45	50	6.8	395	270	190	100
0201CT-11NXKR_	11	10	34	46	50	6.8	480	250	190	100
0201CT-12NXKR_	12	10	33	43	45	6.2	460	250	190	100
0201CT-22NXKR_	22	10	30	35	32	4.5	925	170	140	70

메모

When ordering, please specify packaging code: 0201CT-22NXKRW
Inductance measured at 250 MHz using a Coilcraft SMD-F fixture in an Agilent/HP 4287 impedance analyzer with Coilcraft-provided correlation pieces.
K = 10%
Q measured using Agilent/HP4991A with Agilent/HP 16197 test fixture.
SRF measured using Agilent/HP 8722ES network analyzer and Coilcraft SMD -D test fixture.
DCR measured on Cambridge Technology micro-ohmmeter and Coilcraft CCF858 test fixture.
Current that cause 15°C rise at 25°C. This information is for reference only and does not represent absolute maximum ratings.
Maximum current that can be applied at 85°C.
Maximum current that can be applied at 125°C.

허용 오차:

K = 10%

종단 처리:

R = RoHS compliant matte tin over nickel over silver-glass frit.

패키지:

W = 7″ machine-ready reel. EIA-481 punched paper tape (2000 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
Y = 7″ machine-ready reel. EIA-481 punched paper tape. Factory order only, not stocked (10000 parts per full reel).

환경

환경:

RoHS 준수 , 할로겐 프리

주변 온도 범위:

–40°C to +125°C with Irms current

보관 온도 범위:

Component: –55°C to +140°C.
Tape and reel packaging: –55°C to +80°C

최고 부품 온도:

+140°C (ambient + temp rise).

고장 비율(FIT) / 평균 고장률(MTBF):

See FIT/MTBF Calculations

성능 곡선

L vs Frequency

Q vs Frequency

물리적 특성

A max	B max	C max	D	E	F	G	H
0.023	0.018	0.014	0.004	0.015	0.009	0.007	0.018	inches
0,58	0,46	0,35	0,10	0,38	0,23	0,18	0,46	mm

테이프 및 릴 사양

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)
7" (178 mm)	A	B	C	D	E	W	P	Po	P1	H	T
2000	178	60	13	14,4	8,4	8	2	4	2	0,36	0,42
10000*	178	60	13	14,4	8,4	8	2	4	2	0,36	0,42

* Special order

일반 사양

코어 소재:

Ceramic

중량:

0.14 – 0.24 mg

패키지:

2000 or 10000 per 7″reel; Paper tape: 8 mm wide, 0.42 mm thick, 2 mm pocket spacing

Temperature coefficient of inductance:

+25 to +125 ppm/°C

납땜/세척

수분 민감도(MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

납땜 열 내성:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.

PCB 세척:

PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info

0201CT (0603)

Low Profile Chip Inductors