사이트 설정

창고
언어 설정
통화 설정
리소스
비디오 라이브러리
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

LPO3310 Series

Low Profile Surface Mount Power Inductors

RoHS 준수
Coilcraft LPO3310 Series low-profile, unshielded surface-mount power inductors offer low DC resistance and high saturation current ratings in a compact package. The low-profile ceramic case provides thermal stability and an excellent surface for pick-and-place handling.
  • Low profile for compact packaging
  • High saturation current ratings
  • Ceramic case for thermal stability
  • Ferrite core for flat L vs I curve

지금 구매:
개수 단품 가격
1 $1.39
250 $1.13
500 $0.85
1000 $0.70
5000 $0.59

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

. 재고 보유 중, 당일 발송 가능.
샘플 신청:
설계자용 키트:
키트 가격
C375 15 (3 of each) $45.00

사양

Electrical specifications at 25°C.

부품 번호 1 인덕턴스 (µH) 2
(허용 오차: ±20%)
DCR max (Ω) 3 SRF typ (MHz) 4 Isat (A) 5 Irms (A) 6
LPO3310-301ML_ 0.30 0.040 420 2.8 2.8
LPO3310-471ML_ 0.47 0.042 310 2.3 2.3
LPO3310-701ML_ 0.70 0.068 200 1.9 1.9
LPO3310-102ML_ 1.0 0.076 180 1.6 1.6
LPO3310-152ML_ 1.5 0.120 153 1.4 1.4
LPO3310-222ML_ 2.2 0.150 112 1.1 1.1
LPO3310-332ML_ 3.3 0.200 91.0 0.95 0.95
LPO3310-472ML_ 4.7 0.280 80.0 0.80 0.80
LPO3310-682ML_ 6.8 0.360 68.0 0.66 0.66
LPO3310-822ML_ 8.2 0.500 58.0 0.65 0.65
LPO3310-103ML_ 10 0.520 52.0 0.57 0.57
LPO3310-153ML_ 15 0.700 43.0 0.45 0.45
LPO3310-223ML_ 22 1.200 34.0 0.37 0.37
LPO3310-333ML_ 33 1.780 27.0 0.30 0.30
LPO3310-473ML_ 47 2.150 22.0 0.25 0.25
메모
  1. When ordering, please specify termination and packaging codes: e.g. LPO3310-473MLC
  2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4192A.
  3. DCR measured at 25°C on a micro-ohmmeter. For other operating temperatures, use this DCR at Temperature calculator.
  4. SRF measured using an Agilent/HP 8753ES or equivalent.
  5. Isat: DC current at 25°C that causes a 10% (typ.) inductance drop from its value without current. Temperature derating curves.
  6. Irms: Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.

종단 처리:

  • L = Silver-palladium-platinum-glass frit terminations.
  • T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
  • S = non-RoHS tin-lead (63/37). (Special order, added cost)

패키지:

  • C = 7″ machine-ready reel. EIA-481 embossed plastic tape (1000 parts per full reel).
  • B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead.
  • D = 13″ machine-ready reel. EIA-481 embossed plastic tape (3500 parts per full reel).
환경
환경:
RoHS 준수
주변 온도 범위:
–40°C to +85°C with Irms current
보관 온도 범위:
Component: –40°C to +110°C
Tape and reel packaging: –40°C to +80°C
최고 부품 온도:
+110°C (ambient + temp rise)
고장 비율(FIT) / 평균 고장률(MTBF):

성능 곡선

Inductance vs. Current

Inductance vs. Frequency

물리적 특성

lpo3310d.gif
dims_inches_mm.gif

테이프 및 릴 사양

tapereel_pl.gif
 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
7" (178 mm) 13" (330 mm) A B C D E W P Po P1 H T part_or_ad-(1).gif
1000 3500* 178/330 60/100 13 18,4 12,4 12 8 4 2 1,37 0,23

* Special order
 

일반 사양

코어 소재:
Ferrite
중량:
28.0 - 31.3 mg
패키지:
1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 1.37 mm pocket depth

납땜/세척

수분 민감도(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
납땜 열 내성:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.
권장 픽앤플레이스 노즐:
OD: 3.3 mm; ID: < 1.65 mm
PCB 세척:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

관련 제품 시리즈

관련 제품군