View:
소개
사양
환경
성능 곡선
회로도
물리적 특성
테이프 및 릴
납땜/세척

Datasheet 3D 모델

HA4158-EL and JA4575-BL Series

Dual Inductors for Class-D output filters

The HA4158-EL and JA4575-BL Series are newer, more cost-effective replacements for the HA4158-BL and JA4575-AL. They are identical in form, fit, function and performance. View old data sheet.

Coilcraft's HA4158-EL and JA4575-BL Series uncoupled dual inductors provide two back-to-back inductors that operate independently without coupling effects. This unique design saves space by combining two inductors in a single package. They are perfect for Class-D applications.

Designed for low distortion and the best possible sound quality.
Shielded package contains both coils.
Very low magnetic coupling
SMT (HA4158-EL) and through-hole (JA4575-BL) versions.
AEC-Q200 Grade 1 (−40°C to +125°C)

지금 구매:

부품 번호

내 부품 찾기

개수	단품 가격
1	$2.18
200	$1.86
400	$1.62
1200	$1.26
2400	$1.08
4800	$0.99

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

Packaging

D = 13" machine-ready reel

. 재고 보유 중, 당일 발송 가능.

샘플 신청:

부품 번호

내 부품 찾기

사양

Electrical specifications at 25°C.

부품 번호 1	인덕턴스 (µH) 2 (허용 오차: ±10%)	DCR max (mΩ) 3	SRF typ (MHz) 4	THD+N 5	Isat (A) 6			Irms (A) 7
부품 번호 1	인덕턴스 (µH) 2 (허용 오차: ±10%)	DCR max (mΩ) 3	SRF typ (MHz) 4	THD+N 5	10% drop	20% drop	30% drop	20°C rise	40°C rise
HA4158-EL_	10	13.0	21.5	<0.1	6.0	6.7	7.1	4.0	6.0
JA4575-BL_	10	13.0	21.5	<0.1	6.0	6.7	7.1	4.0	6.0

메모

When ordering, please specify termination and packaging codes: e.g. HA4158-ELD
Inductance is for each winding, measured at 100 kHz, 1.0 Vrms, 0 Adc using an Agilent/HP 4284A impedance analyzer.
DCR is for each winding, measured on a micro-ohmmeter at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
SRF measured using Agilent/HP 8753D network analyzer.
Total harmonic distortion + noise measured at 20 W into a 2-Ohm or 4-Ohm load at 1 kHz with a 21 Vdc supply
Isat: DC current (typical) at which the inductance drops the specified amount from its value without current.
Irms: Current applied to both windings at the same time that causes the specified temperature rise from 25Â°C ambient. This information is for reference only and does not represent absolute maximum ratings.

종단 처리:

L = RoHS compliant tin-silver over copper.
T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
S = non-RoHS tin-lead (63/37). (Special order, added cost)

패키지:

D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.

환경

환경:

RoHS 준수

주변 온도 범위:

–40°C to +125°C with Irms current

보관 온도 범위:

Component: −40°C to +165°C
Tape and reel packaging: −40°C to +80°C

최고 부품 온도:

+165°C (Ambient + temperature rise)

고장 비율(FIT) / 평균 고장률(MTBF):

See FIT/MTBF Calculations

성능 곡선

Inductance vs. Current

회로도

물리적 특성

HA4158-EL JA4575-BL

테이프 및 릴 사양

	Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)
	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
HA4158-EL	400	330	100	13	30,4	24,4	24	16	4	2	10,8	0,5
JA4575-BL	250	330	100	13	30,4	24,4	24	20	4	2	13,84	0,5

일반 사양

코어 소재:

Ferrite

중량:

5.0 g

패키지:

HA4158-EL: 400/13″ reel Plastic tape: 24 mm wide, 0.5 mm thick, 16 mm pocket spacing, 10.8 mm pocket depth
JA4575-BL: 250/13″ reel Plastic tape: 24 mm wide, 0.5 mm thick, 20 mm pocket spacing, 13.84 mm pocket depth

납땜/세척

수분 민감도(MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

납땜 열 내성:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.

PCB 세척:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

HA4158-EL and JA4575-BL Series

Dual Inductors for Class-D output filters