View:
소개
사양
환경
성능 곡선
회로도
물리적 특성
테이프 및 릴
납땜/세척

3D Model Datasheet

GA3416-CL Series

Dual Inductor for Class-D output filters

Coilcraft's GA3416-CL Series uncoupled dual inductors provide two back-to-back inductors that operate independently without coupling effects. This unique design saves space by combining two inductors in a single package. They are perfect for Class-D applications.

Designed for low distortion and best possible sound quality
Shielded SMT package with two coils
Very low magnetic coupling
Additional mounting pads provide excellent board adhesion
AEC-Q200 Grade 1 (−40°C to +125°C)

Electroplated gold (<50 µin) over nickel over phos bronze (additional mounting pads only)

지금 구매:

개수	단품 가격
1	$6.78
400	$6.60
800	$5.73
1200	$5.00
2400	$4.30
4800	$3.94

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

Packaging

D = 13" machine-ready reel

. 재고 보유 중, 당일 발송 가능.

샘플 신청:

사양

Electrical specifications at 25°C.

부품 번호 1	인덕턴스 (µH) 2 (허용 오차: ±10%)	DCR max (mΩ) 3	SRF typ (MHz) 4	THD+N 5	Isat (A) 6			Irms (A) 7
부품 번호 1	인덕턴스 (µH) 2 (허용 오차: ±10%)	DCR max (mΩ) 3	SRF typ (MHz) 4	THD+N 5	10% drop	20% drop	30% drop	20°C rise	40°C rise
GA3416-CL_	10	21.0	23.6	<0.2	8.6	8.7	8.8	3.0	4.3

메모

When ordering, please specify termination and packaging codes: e.g. GA3416-CLD
Inductance measured at 500 kHz, 0.5 Vrms, 0 Adc using an Agilent/HP 4284A impedance analyzer.
DCR measured on a micro-ohmmeter at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
SRF measured using Agilent/HP 8753D network analyzer.
Total harmonic distortion + noise measured at 23 W into a 2-Ohm or 4-Ohm load at 1 kHz with a 21 Vdc supply.
Isat: DC current at 25°C that causes the specified inductance drop from its value without current.
Irms: Current applied to both windings at the same time that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.

종단 처리:

L = RoHS compliant tin-silver over copper (leads); gold over nickel over phos bronze (additional mounting pads.
T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
S = non-RoHS tin-lead (63/37). (Special order, added cost)

패키지:

D = 13″ machine-ready reel. EIA-481 embossed plastic tape (200 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.

환경

환경:

RoHS 준수

주변 온도 범위:

−40°C to +125°C with (40°C) Irms current

보관 온도 범위:

Component: −40°C to +165°C
Tape and reel packaging: −40°C to +80°C

최고 부품 온도:

+165°C (Ambient + temperature rise)

고장 비율(FIT) / 평균 고장률(MTBF):

See FIT/MTBF Calculations

성능 곡선

Inductance vs. Current

회로도

물리적 특성

테이프 및 릴 사양

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)						Orientation
13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
200	330	100	13	38,4	32,4	32	20	4	2	12,95	0,4

일반 사양

코어 소재:

Ferrite

중량:

7.8 g

패키지:

200/13″ reel Plastic tape: 32 mm wide, 0.4 mm thick, 20 mm pocket spacing, 12.95 mm pocket depth

납땜/세척

수분 민감도(MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

납땜 열 내성:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.

PCB 세척:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

GA3416-CL Series

Dual Inductor for Class-D output filters

사양

종단 처리:

패키지:

성능 곡선

Inductance vs. Current

회로도

물리적 특성

테이프 및 릴 사양

일반 사양

납땜/세척

관련 제품 시리즈

1210uT Series

HA4158-EL and JA4575-BL Series

RA7231 Series

UA8014/UA8013 Series

YA9245-AL, ZA9336-AL

창고

언어 설정

통화 설정

GA3416-CL Series

Dual Inductor for Class-D output filters

선택한 구성 공급 불가

사양

종단 처리:

패키지:

성능 곡선

Inductance vs. Current

회로도

물리적 특성

테이프 및 릴 사양

일반 사양

납땜/세척

관련 제품 시리즈

1210uT Series

HA4158-EL and JA4575-BL Series

RA7231 Series

UA8014/UA8013 Series

YA9245-AL, ZA9336-AL

경고