View:
소개
사양
환경
성능 곡선
회로도
물리적 특성
테이프 및 릴
납땜/세척

3D Model Datasheet

1210uT-332

부품에 대한 추가 정보 및 사양.

시리즈로 이동

지금 구매:

샘플 신청:

사양

Electrical specifications at 25°C.

부품 번호 1	인덕턴스 (µH) 2 (허용 오차: ±20%)	Coupling coefficient (max)	DCR max (Ω) 3	SRF typ (MHz)	절연 전압 (Vrms)	Isat (A) 4				Irms (A) 5
부품 번호 1	인덕턴스 (µH) 2 (허용 오차: ±20%)	Coupling coefficient (max)	DCR max (Ω) 3	SRF typ (MHz)	절연 전압 (Vrms)	25°C	85°C	105°C	125°C	25°C	85°C	125°C
1210uT-332MRC	3.3	0.1	0.285	70	250	1.5	1.2	0.90	0.73	0.77	0.69	0.40

메모

When ordering, please specify termination and packaging codes: e.g. 1210uT-103MRC
Inductance measured per winding at 100 kHz, 0.1 V, 0 Adc.
DCR is per winding, measured on a micro-ohmeter.
Isat: DC current at the specified ambient temperature that causes a 30% inductance drop from its value without current.
Irms: Current applied to both windings at the same time causes a 40C rise from the specified 25°C and 85°C ambient temperatures, and a 15°C rise at 125°C ambient temperature. This information is for reference only and does not represent absolute maximum ratings.

종단 처리:

R = RoHS compliant matte tin over nickel over silver-platinum-glass frit.
Q = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
P = non-RoHS tin-lead (63/37). (Special order, added cost

패키지:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (600 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13″ machine-ready reel. EIA-481 embossed plastic tape (2200 parts per full reel). Factory order only, not stocked.

환경

환경:

RoHS 준수 , 할로겐 프리

주변 온도 범위:

−40°C to +125°C with (40°C) Irms current

보관 온도 범위:

Component: −40°C to +125°C
Tape and reel packaging: −40°C to +80°C

최고 부품 온도:

+140°C (Ambient + temperature rise)

고장 비율(FIT) / 평균 고장률(MTBF):

See FIT/MTBF Calculations

성능 곡선

Impedance vs Frequency

L vs Current vs Temperature

회로도

물리적 특성

테이프 및 릴 사양

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
750	3500*	178/330	60/100	13	18,4	12,4	12	8	4	2	2,67	0,23

* Special order

일반 사양

코어 소재:

Ferrite

중량:

75 − 95 mg

패키지:

750/7″ reel; 3000/13″ reel; Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 2.67 mm pocket depth

납땜/세척

수분 민감도(MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

납땜 열 내성:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.

PCB 세척:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

1210uT-332