3D Model Datasheet Spice 모델 SPICE DCDC Tool

XGL1712 Series

Ultra-Low Loss Shielded Power Inductors

XGL1712 molded power inductors offer our lowest DC losses and extremely low AC losses for a wide range of DC-DC converters. Additional performance benefits include a wider range of inductance values and improved I_rms current ratings.

Industry’s lowest DCR and low power losses
Wide inductance range up to 82 µH
High current handling with soft saturation characteristics
AEC-Q200 (–40°C to +125°C) with a 165°C max part temperature

지금 구매:

부품 번호

내 부품 찾기

개수	단품 가격
1	$9.49
150	$9.31
300	$6.98
600	$4.19
1200	$3.26
2400	$2.79
5000	$2.56

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

Termination

E = Tin-silver (96.5/3.5) over copper

Packaging

D = 13" machine-ready reel

Tolerance

M = 20%

. 재고 보유 중, 당일 발송 가능.

샘플 신청:

부품 번호

내 부품 찾기

사양

Electrical specifications at 25°C. Operating voltage 0 — 60 V

부품 번호 1	인덕턴스 (µH) 2 (허용 오차: ±20%)	DCR (mΩ) 3		SRF typ (MHz) 4	Isat (A) 5			Irms (A) 6
부품 번호 1	인덕턴스 (µH) 2 (허용 오차: ±20%)	typ	max	SRF typ (MHz) 4	10% drop	20% drop	30% drop	20°C rise	40°C rise
XGL1712-102MED	1.0	0.90	1.1	27.0	40.0	68.0	95.0	40.0	55.0
XGL1712-162MED	1.6	1.1	1.3	21.0	32.0	54.5	77.0	36.0	50.0
XGL1712-232MED	2.3	1.3	1.5	17.0	28.5	48.0	69.5	31.6	43.5
XGL1712-332MED	3.3	1.6	1.9	15.0	23.0	40.0	59.0	30.3	41.7
XGL1712-472MED	4.7	2.0	2.3	13.0	19.9	35.0	51.5	27.2	37.7
XGL1712-562MED	5.6	2.5	2.8	12.0	18.2	32.0	47.0	24.6	33.9
XGL1712-752MED	7.5	3.1	3.6	9.7	16.5	28.5	42.0	22.4	31.5
XGL1712-103MED	10	3.8	4.4	8.4	14.3	24.5	35.0	20.3	27.9
XGL1712-153MED	15	6.3	7.2	6.6	11.3	19.7	29.0	16.8	22.7
XGL1712-183MED	18	6.9	7.9	6.3	10.9	18.5	27.0	15.4	21.2
XGL1712-223MED	22	8.8	9.8	5.7	9.8	16.6	24.0	14.4	19.5
XGL1712-333MED	33	13.7	15.2	5.1	8.9	14.6	20.5	11.3	15.4
XGL1712-473MED	47	18.7	20.7	4.1	7.1	11.8	16.5	9.7	13.3
XGL1712-683MED	68	28.2	31.3	3.4	5.6	9.2	12.8	8.1	11.0
XGL1712-823MED	82	34.6	38.4	2.8	5.3	8.8	12.5	7.1	9.7

메모

When ordering, please specify termination code: e.g. XGL1712-823MED
Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
DCR measured at 25°C on a micro-ohmmeter. For other operating temperatures, use this DCR at Temperature calculator.
SRF measured using an Agilent/HP 4395A or equivalent.
Isat: DC current at 25°C that causes the specified inductance drop from its value without current.
Temperature derating curves.
Irms: Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.
Irms testing was performed on 0.75 inch wide × 0.25 inch thick copper traces in still air. Temperature rise is highly dependent on many factors including pcb land pattern, trace size, and proximity to other components. Therefore temperature rise should be verified in application conditions.

종단 처리:

E = Halogen free component. RoHS compliant tin-silver over copper terminations.
T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
S = non-RoHS tin-lead (63/37). (Special order, added cost)

패키지:

D = 13" machine-ready reel
EIA-481 embossed plastic tape (150 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).

환경

환경:

RoHS 준수 , 할로겐 프리

주변 온도 범위:

–40°C to +125°C with (40°C rise) Irms current

보관 온도 범위:

Component: –55°C to +165°C.
Tape and reel packaging: –55°C to +80°C

최고 부품 온도:

+165°C (ambient + temp rise)

고장 비율(FIT) / 평균 고장률(MTBF):

See FIT/MTBF Calculations