Datasheet DCDC Tool 3D 모델

XEL4030V Series Ultra-Low Loss

Shielded Power Inductors

Exceptionally low DCR and ultra low AC losses for high switching frequencies (2 to 5 MHz)
Superior current handling with soft saturation characteristics
Composite construction minimizes audible buzzing
High-voltage rating of 120 V - 50% higher than the standard series.
Learn more about Voltage Ratings for Inductors
AEC-Q200 Grade 1 (−40°C to +125°C)
Can withstand high current spikes
Designed for high temperature applications
RoHS-compliant, halogen free. 260°C compatible. Tin-silver (96.5/3.5) over copper terminations
COTS Plus tin-silver-copper and tin-lead terminations available

지금 구매:

부품 번호

내 부품 찾기

개수	단품 가격
1	$2.38
100	$2.11
250	$1.56
500	$0.95
1000	$0.73
2500	$0.65
5000	$0.58

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

Tolerance

M = 20%

Termination

E = Tin-silver (96.5/3.5) over copper

Packaging

C = 7" machine-ready reel

. 재고 보유 중, 당일 발송 가능.

샘플 신청:

부품 번호

내 부품 찾기

사양

Electrical specifications at 25°C. Operating voltage 0 – 120 V

부품 번호 1	인덕턴스 (µH) 2 (허용 오차: ±20%)	DCR (mΩ) 3		SRF typ (MHz) 4	Isat (A) 5	Irms (A) 6
부품 번호 1	인덕턴스 (µH) 2 (허용 오차: ±20%)	typ	max	SRF typ (MHz) 4	Isat (A) 5	20°C rise	40°C rise
XEL4030V-101	0.10	1.5	1.8	240	30.0	20.4	25.8
XEL4030V-201	0.20	2.2	2.4	155	22.0	17.0	21.6
XEL4030V-301	0.30	2.8	3.1	115	19.0	14.9	18.9
XEL4030V-471	0.47	4.1	4.6	95.0	15.5	12.3	15.6
XEL4030V-641	0.64	5.3	5.9	80.0	13.5	10.9	13.7
XEL4030V-901	0.90	8.0	8.8	68.0	10.0	8.8	11.2
XEL4030V-102	1.0	8.9	9.8	65.0	9.0	8.4	10.7
XEL4030V-122	1.2	10.4	11.5	60.0	8.7	7.8	9.8
XEL4030V-152	1.5	15.1	16.6	58.0	8.5	6.4	8.1
XEL4030V-222	2.2	20.1	22.1	40.0	6.1	5.8	7.8
XEL4030V-332	3.3	26.1	28.6	35.0	5.9	5.0	6.6
XEL4030V-472	4.7	40.0	44.1	30.0	4.6	3.9	5.1
XEL4030V-682	6.8	67.4	74.1	20.0	3.6	3.0	3.9

메모

When ordering, please specify termination and packaging codes: e.g. XEL4030-682MEC
Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc.
DCR measured at 25°C on a micro-ohmmeter. For other operating temperatures, use this DCR at Temperature calculator.
SRF measured using an Agilent/HP 4395A or equivalent.
Isat: DC current at 25°C that causes a 30% (typ) inductance drop from its value without current. Temperature derating curves.
Irms: Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.
Irms testing was performed on 0.75 inch wide × 0.25 inch thick copper traces in still air. Temperature rise is highly dependent on many factors including pcb land pattern, trace size, and proximity to other components. Therefore temperature rise should be verified in application conditions.

종단 처리:

E = Halogen free component. RoHS compliant tin-silver over copper terminations.
T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
S = non-RoHS tin-lead (63/37). (Special order, added cost)

패키지:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (500 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (2000 parts per full reel).

환경

환경:

RoHS 준수 , 할로겐 프리

주변 온도 범위:

–40°C to +125°C with (40°C) Irms current

보관 온도 범위:

Component: –55°C to +165°C
Tape and reel packaging: –55°C to +80°C

최고 부품 온도:

+165°C (ambient + temp rise)

고장 비율(FIT) / 평균 고장률(MTBF):

See FIT/MTBF Calculations

성능 곡선

Inductance vs. Frequency

L vs. Current

물리적 특성

테이프 및 릴 사양

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
500	2000*	178/330	60/100	13	18,4	12,4	12	8	4	2	3,25	0,23

* Special order

일반 사양

코어 소재:

Composite

중량:

0.28 g

패키지:

500/7″ reel; 2000/13″ reel Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 3.25 mm pocket depth

납땜/세척

수분 민감도(MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

납땜 열 내성:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.

PCB 세척:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

XEL4030V Series Ultra-Low Loss

Shielded Power Inductors