Datasheet 3D 모델

XEL4014-331

Name: XEL4014-331MEC
Brand: Coilcraft
SKU: XEL4014-331MEC
Price: 0.58 USD
Availability: InStock

XEL4014-331MEC

Great News! More Choices!
For XEL4012, see XGL4012 for a drop-in replacement with as much as 50% lower DCR and higher L values (up to 1.2 µH).

For XEL4014, see XGL4015 for significantly lower DCR and higher L values.

부품에 대한 추가 정보 및 사양.

시리즈로 이동

지금 구매:

개수	단품 가격
1	$1.85
100	$1.62
250	$1.22
500	$0.74
1000	$0.58
2500	$0.50
5000	$0.45

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

Tolerance

M = 20%

Termination

E = Tin-silver (96.5/3.5) over copper

Packaging

C = 7" machine-ready reel

. 재고 보유 중, 당일 발송 가능.

샘플 신청:

설계자용 키트:

키트	값	가격
C464	29 (3 of each)	$75.00

사양

Electrical specifications at 25°C. Operating voltage 0 – 80 V

부품 번호 1	인덕턴스 (nH) 2 (허용 오차: ±20%)	DCR (mΩ) 3		SRF typ (MHz) 4	Isat (A) 5	Irms (A) 6
부품 번호 1	인덕턴스 (nH) 2 (허용 오차: ±20%)	typ	max	SRF typ (MHz) 4	Isat (A) 5	20°C rise	40°C rise
XEL4014-331ME_	330	9.9	12.0	110	14.6	6.5	9.0

메모

When ordering, please specify termination and packaging codes: e.g. XEL4014-781MEC
Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc.
DCR measured at 25°C on a micro-ohmmeter. For other operating temperatures, use this DCR at Temperature calculator.
SRF measured using an Agilent/HP 4395A or equivalent.
Isat: DC current at 25°C that causes a 30% (typ) inductance drop from its value without current. Temperature derating curves.
Irms: Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.
Irms testing was performed on 0.75 inch wide × 0.25 inch thick copper traces in still air. Temperature rise is highly dependent on many factors including pcb land pattern, trace size, and proximity to other components. Therefore temperature rise should be verified in application conditions.

종단 처리:

E = Halogen free component. RoHS compliant tin-silver over copper terminations.
S = non-RoHS tin-lead (63/37). (Special order, added cost)

패키지:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape. Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C.
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked.

환경

환경:

RoHS 준수 , 할로겐 프리

주변 온도 범위:

–40°C to +125°C with (40°C) Irms

보관 온도 범위:

Component: –55°C to +165°C.
Tape and reel packaging: –55°C to +80°C

최고 부품 온도:

+165°C (ambient + temp rise)

고장 비율(FIT) / 평균 고장률(MTBF):

See FIT/MTBF Calculations

성능 곡선

Inductance vs. Frequency

Inductance vs. Current

물리적 특성

테이프 및 릴 사양

	Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)
	7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
XEL4012	1500	5000*	178/330	60/100	13	18,4	12,4	12	8	4	2	1,40	0,23
XEL4014	1000	4000*	178/330	60/100	13	18,4	12,4	12	8	4	2	1,78	0,23

* Special order

일반 사양

코어 소재:

Composite

중량:

0.11 g

패키지:

XEL4012: 1500/7″ reel; 5000/13″ reel Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 1.40 mm pocket depth
XEL4014: 1000/7″ reel; 4000/13″ reel Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 1.78 mm pocket depth

납땜/세척

수분 민감도(MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

납땜 열 내성:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.

PCB 세척:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

XEL4014-331

XEL4014-331MEC