3D Model Datasheet Spice 모델 SPICE DCDC Tool

ZC1818 Series

High Current, High L Shielded Power Inductors

Optimized for the evaluation board STEVAL-L3751V12 from STMicroelectronics
High voltage rating of 75 V – higher than similar parts in the market
Low DCR and soft saturation characteristic for high current applications
AEC-Q200 Grade 1 (–40°C to +125°C)

지금 구매:

개수	단품 가격
1	$9.42
150	$7.69
300	$5.77
600	$3.46
1200	$2.69
2400	$2.31
5000	$2.12

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

Tolerance

M = 20%

Termination

E = Tin-silver (96.5/3.5) over copper

Packaging

D = 13" machine-ready reel

. 재고 보유 중, 당일 발송 가능.

샘플 신청:

사양

Electrical specifications at 25°C. Operating voltage 0 — 75 V

부품 번호	인덕턴스 (µH) 1 (허용 오차: ±20%)	DCR (mΩ) 2		SRF typ (MHz) 3	Isat (A) 4			Irms (A) 5
부품 번호	인덕턴스 (µH) 1 (허용 오차: ±20%)	typ	max	SRF typ (MHz) 3	10% drop	20% drop	30% drop	20°C rise	40°C rise
ZC1818-AED	8.2	6.0	7.5	10.8	13.3	22.4	30.0	18.0	24.0

메모

Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc.
DCR measured at 25°C on a micro-ohmmeter. For other operating temperatures, use this DCR at Temperature calculator.
SRF measured using an Agilent/HP 4395A or equivalent.
Isat: DC current at 25°C that causes an inductance drop of 30% (typ) from its value without current. Temperature derating curves.
Irms: Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.
Irms testing was performed on 0.75 inch wide × 0.25 inch thick copper traces in still air. Temperature rise is highly dependent on many factors including pcb land pattern, trace size, and proximity to other components. Therefore temperature rise should be verified in application conditions.

종단 처리:

E = Halogen free component. RoHS compliant tin-silver over copper terminations.

패키지:

D = 13″ machine-ready reel. EIA-481 embossed plastic tape (150 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).

환경

환경:

RoHS 준수 , 할로겐 프리

주변 온도 범위:

−40°C to +125°C with (40°C rise) Irms

보관 온도 범위:

Component: –40°C to +165°C.
Tape and reel packaging: –55°C to +80°C

최고 부품 온도:

+165°C (Ambient + temperature rise)

고장 비율(FIT) / 평균 고장률(MTBF):

See FIT/MTBF Calculations

성능 곡선

L vs Current

L vs Frequency

물리적 특성

테이프 및 릴 사양

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)						Orientation
13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
150	330	100	13	38,4	32,4	32	24	4	2	10,26	0,4

일반 사양

코어 소재:

Composite

중량:

13.1 g

패키지:

150/13″ reel Plastic tape: 32 mm wide, 0.4 mm thick, 24 mm pocket spacing, 10.26 mm pocket depth

납땜/세척

수분 민감도(MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

납땜 열 내성:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.

PCB 세척:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

ZC1818 Series

High Current, High L Shielded Power Inductors