View:
소개
사양
환경
성능 곡선
회로도
물리적 특성
테이프 및 릴
납땜/세척

3D Model Datasheet

MSD1583-153

Name: MSD1583-153MED
Brand: Coilcraft
SKU: MSD1583-153MED
Price: 1.56 USD
Availability: InStock

MSD1583-153MED

부품에 대한 추가 정보 및 사양.

시리즈로 이동

지금 구매:

개수	단품 가격
1	$3.95
300	$2.59
600	$1.56
1200	$1.21
2400	$1.04
4800	$0.96

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

Tolerance

M = 20%

Termination

E = Matte tin over nickel

Packaging

D = 13" machine-ready reel

. 재고 보유 중, 당일 발송 가능.

샘플 신청:

설계자용 키트:

키트	값	가격
C463	41 (3 of each)	$160.00

사양

Electrical specifications at 25°C.

플라이백 용도

부품 번호 1 (Hover for schematics)	인덕턴스 (µH) 2 (허용 오차: ±20%)	DCR (Ω) 3		절연 전압 (V)	누설 인덕턴스 (nH) 5	권수비
부품 번호 1 (Hover for schematics)	인덕턴스 (µH) 2 (허용 오차: ±20%)	typ	max	절연 전압 (V)	누설 인덕턴스 (nH) 5	권수비
MSD1583-153ME_	15	0.039	0.045	500	380	1 : 1

SEPIC 용도

부품 번호 1 (Hover for schematics)	인덕턴스 (µH) 2 (허용 오차: ±20%)	DCR (Ω) 3		SRF typ (MHz) 4	결합 계수	누설 인덕턴스 (nH) 5	Isat (A) 6			Irms (A)
부품 번호 1 (Hover for schematics)	인덕턴스 (µH) 2 (허용 오차: ±20%)	typ	max	SRF typ (MHz) 4	결합 계수	누설 인덕턴스 (nH) 5	10% drop	20% drop	30% drop	양측 권선 7	단일 권선 8
MSD1583-153ME_	15	0.039	0.045	12.0	0.99	380	9.5	10.8	11.8	3.2	4.5

메모

When ordering, please specify termination and packaging codes: e.g. MSD1583-105KEC
Inductance shown for each winding, measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR meter or equivalent.
For SEPIC: When leads are connected in parallel, inductance is the same value. When leads are connected in series, inductance is four times the value.
DCR is for each winding. DCR at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
For SEPIC: When leads are connected in parallel, DCR is half the value. When leads are connected in series, DCR is twice the value.
SRF measured using an Agilent/HP 4191A or equivalent. When leads are connected in parallel, SRF is the same value.
Leakage inductance is for L1 and is measured with L2 shorted.
Isat: DC current, at which the inductance drops the specified amount from its value without current. It is the sum of the current flowing in both windings.
Irms, both windings: Equal current when applied to each winding simultaneously that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Determine temperature rise.
Irms, one winding: Current when applied to one winding that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Determine temperature rise.

종단 처리:

E = Halogen free component. RoHS compliant matte tin over nickel over phos bronze terminations.
Q = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
P = non-RoHS tin-lead (63/37). (Special order, added cost)

패키지:

D = 13″ machine-ready reel. EIA-481 embossed plastic tape (300 parts per full reel).
B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter D instead.

환경

환경:

RoHS 준수 , 할로겐 프리

주변 온도 범위:

–40°C to +85°C with (40°C rise) Irms current

보관 온도 범위:

Component: –40°C to +125°C
Tape and reel packaging: –40°C to +80°C

최고 부품 온도:

+125°C (ambient + temp rise)

고장 비율(FIT) / 평균 고장률(MTBF):

See FIT/MTBF Calculations

성능 곡선

Inductance vs Current

Inductance vs. Frequency

회로도

물리적 특성

테이프 및 릴 사양

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)						Orientation
13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
300	330	100	13	38,4	32,4	32	24	4	2	8,6	0,5

일반 사양

코어 소재:

Ferrite

중량:

3.7 – 4.4 g

패키지:

300/13″ reel; Plastic tape: 32 mm wide, 0.5 mm thick, 24 mm pocket spacing, 8.6 mm pocket depth.

Winding to Winding Isolation:

500 Vrms, one minute

납땜/세척

수분 민감도(MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

납땜 열 내성:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.

PCB 세척:

Tested with pure water or alcohol only. More info.

MSD1583-153

MSD1583-153MED