View:
소개
사양
환경
성능 곡선
회로도
물리적 특성
테이프 및 릴
납땜/세척

3D Model Datasheet

MSD1038V-103

Name: MSD1038V-103MEC
Brand: Coilcraft
SKU: MSD1038V-103MEC
Price: 1.11 USD
Availability: InStock

MSD1038V-103MEC

부품에 대한 추가 정보 및 사양.

시리즈로 이동

지금 구매:

개수	단품 가격
1	$3.90
100	$3.19
250	$2.39
500	$1.43
1000	$1.11
2500	$0.96
5000	$0.88

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

Tolerance

K = 10%

Termination

E = Matte tin over nickel over phos bronze

Packaging

C = 7" machine-ready reel

. 재고 보유 중, 당일 발송 가능.

샘플 신청:

사양

Electrical specifications at 25°C.

플라이백 용도

부품 번호 1	인덕턴스 (µH) 2 (허용 오차: ±20%)	DCR max (Ω) 3	절연 전압 (V)	누설 인덕턴스 (nH) 5	권수비
부품 번호 1	인덕턴스 (µH) 2 (허용 오차: ±20%)	DCR max (Ω) 3	절연 전압 (V)	누설 인덕턴스 (nH) 5	권수비
MSD1038V-103ME_	10	0.108	2250	500	1 : 1

SEPIC 용도

부품 번호 1	인덕턴스 (µH) 2 (허용 오차: ±20%)	DCR max (Ω) 3	결합 계수	누설 인덕턴스 (nH) 5	Isat (A) 6	Irms (A)
부품 번호 1	인덕턴스 (µH) 2 (허용 오차: ±20%)	DCR max (Ω) 3	결합 계수	누설 인덕턴스 (nH) 5	Isat (A) 6	양측 권선 7	단일 권선 8
MSD1038V-103ME_	10	0.108	≥0.95	500	4.7	2.75	3.9

메모

When ordering, please specify termination and packaging codes: e.g. MSD1038V-154KEC
Inductance shown for each winding, measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR meter or equivalent. When leads are connected in parallel, inductance is the same value. When leads are connected in series, inductance is four times the value.
DCR is for each winding. When leads are connected in parallel, DCR is half the value. When leads are connected in series, DCR is twice the value.
SRF measured using an Agilent/HP 4191A or equivalent. When leads are connected in parallel, SRF is the same value.
Leakage Inductance is for L1 and is measured with L2 shorted.
DC current at 25°C that causes a 30% (typ) inductance drop from its value without current. It is the sum of the current flowing in both windings.
Equal current when applied to each winding simultaneously that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. To predict temperature rise go to online calculator.
Maximum current when applied to one winding that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. To predict temperature rise go to online calculator.

종단 처리:

E = RoHS compliant matte tin over nickel over phos bronze.
Q = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
P = non-RoHS tin-lead (63/37). (Special order, added cost)

패키지:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape. (250 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (1000 parts per full reel)

환경

환경:

RoHS 준수 , 할로겐 프리

주변 온도 범위:

–40°C to +125°C with Irms current.

보관 온도 범위:

Component: –40°C to +165°C.
Tape and reel packaging: –40°C to +80°C

최고 부품 온도:

+165°C (ambient + temp rise).

고장 비율(FIT) / 평균 고장률(MTBF):

See FIT/MTBF Calculations

성능 곡선

Inductance vs Current

Inductance vs. Frequency

회로도

물리적 특성

테이프 및 릴 사양

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
250	1000*	178/330	60/100	13	30,4	24,4	24	16	4	2	4,3	0,35

* Special order

일반 사양

코어 소재:

Ferrite

중량:

1.2– 1.5 g

패키지:

250/7″ reel; 1000/13″ reel Plastic tape: 24 mm wide, 0.35 mm thick, 16 mm pocket spacing, 4.3 mm pocket depth.

Winding to Winding Isolation:

2250 Vrms, one minute

납땜/세척

수분 민감도(MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

납땜 열 내성:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.

PCB 세척:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info

MSD1038V-103

MSD1038V-103MEC