Datasheet 3D 모델

PDMC

Combination Filter Chokes

Combined common and differential mode filtering in a single component
Provide differential filtering at higher frequencies (>1000 Ohms @ 50 MHz)
2000 Vrms, one minute isolation (hipot) between windings
AEC-Q200 Grade 2 (–40°C to +105°C)
Refer to Designing Common Mode Filters for design guidance.
RoHS-compliant. Tin-silver over tin over copper terminations.

지금 구매:

부품 번호

내 부품 찾기

개수	단품 가격
1	$8.51
25	$7.45
100	$6.51
250	$5.70
500	$4.99

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

Termination

L = Tin-silver (96.5/3.5) over copper

. 재고 보유 중, 당일 발송 가능.

샘플 신청:

부품 번호

내 부품 찾기

사양

Electrical specifications at 25°C.

부품 번호	라인	공통 모드 피크 임피던스 (kΩ)	인덕턴스 (µH) 1 (허용 오차: ±30%)	누설 인덕턴스 최대 (µH) 2	Irms (A) 3	DCR max (mΩ) 4	절연 전압 (Vrms) 5
부품 번호	라인	공통 모드 피크 임피던스 (kΩ)	인덕턴스 (µH) 1 (허용 오차: ±30%)	누설 인덕턴스 최대 (µH) 2	Irms (A) 3	DCR max (mΩ) 4	절연 전압 (Vrms) 5
PDMC-T124NL	2	815 @ 1.5 MHz	120	5.4	20.0	1.45	2000
PDMC-T454NL	2	3570 @ 1.5 MHz	450	22	8.3	8.2	2000

메모

Inductance shown for each winding, measured at 10 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4263B LCR meter or equivalent.
Leakage inductance is measured from pin 1 to pin 2 with pins 4 and 3 shorted.
Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.
DCR is for each winding.
2000 Vrms, one minute isolation (hipot) between windings.

종단 처리:

L = RoHS compliant tin-silver (96.5/3.5) over copper
T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
S = non-RoHS tin-lead (63/37). (Special order, added cost)

패키지:

25 per tray

환경

환경:

RoHS 준수

주변 온도 범위:

–40°C to +105°C

보관 온도 범위:

Component: –40°C to +145°C
Tray packaging: –40°C to +80°C

최고 부품 온도:

+145°C (ambient + temp rise)

고장 비율(FIT) / 평균 고장률(MTBF):

See FIT/MTBF Calculations

성능 곡선

Typical Attenuation (Ref: 50 Ohms)

Typical Impedance vs Frequency

회로도

물리적 특성

Part Code	A		B		C		D		E	F	G	H	I	Units
Part Code	nom	max	nom	max	nom	max	nom	max	nom	nom	nom	nom	nom	Units
T124	1.000	1.063	0.960	0.984	0.550	0.630	0.177	0.197	0.071	0.570	0.236	0.976	0.090	in
T124	25.40	27.00	24.38	25.00	14.00	16.00	4.50	5.00	1.80	14.50	6.00	24.80	2.30	mm
T454	1.000	1.043	0.960	0.984	0.550	0.630	0.177	0.197	0.035	0.570	0.276	0.937	0.051	in
T454	25.40	26.50	24.38	25.00	14.00	16.00	4.50	5.00	0.900	14.50	7.00	23.80	1.30	mm

일반 사양

코어 소재:

Ferrite

중량:

PDMC-T124: 21.53 g, PDMC-T454: 16.25 g

패키지:

25 per tray

세척

수분 민감도(MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

PCB 세척:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

PDMC

Combination Filter Chokes