View:
소개
사양
환경
성능 곡선
회로도
물리적 특성
테이프 및 릴
납땜/세척

0805USBN Series

Low-profile Common Mode Chokes

Our 0805USBN Series low-profile common mode chokes are great for noise suppression in ultra-high-speed signal lines (USB 3.x, HDMI 2.0, HDBaseT™, DisplayPort, DVI, etc.) and in high-speed differential signal lines (USB 2.0, IEEE1394, and LVDS). They are also suitable for USB-type C specification 1.0 and provide up to
6.5 GHz differential mode 3 dB cutoff frequency and up to 30 dB common mode noise attenuation in the GHz range.

For noise suppression in super-high-speed signal lines (USB 3.x, HDMI 2.0, HDBaseT™, DisplayPort, DVI, etc.) and in high-speed differential signal lines (USB 2.0, IEEE1394, and LVDS). Also suitable for USB-type C specification 1.0.
Up to 6.5 GHz differential mode 3 dB cutoff frequency
Up to 35 dB common mode noise attenuation in GHz range
Compact, low-profile (<1.0 mm) package
Designed for high temperature applications up to +125°C

Refer to Designing Common Mode Filters for design guidance.

지금 구매:

부품 번호

내 부품 찾기

개수	단품 가격
1	$0.69
200	$0.58
500	$0.41
1000	$0.32
2000	$0.28
4000	$0.25

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

Tolerance

M = 20%

Termination

R = Matte tin over nickel over silver-palladium-glass frit

Packaging

C = 7" machine-ready reel

. 재고 보유 중, 당일 발송 가능.

샘플 신청:

부품 번호

내 부품 찾기

설계자용 키트:

키트	값	가격
C470	39 (10 of each)	$110.00

사양

Electrical specifications at 25°C.

부품 번호 1	라인	공통 모드 피크 임피던스 (kΩ)	차단 주파수 (GHz) 2	공통 모드 감쇠, 통상 (dB)			인덕턴스 최소 (nH) 3	Irms (mA) 4	DCR max (Ω) 5	절연 전압 (Vrms) 6
부품 번호 1	라인	공통 모드 피크 임피던스 (kΩ)	차단 주파수 (GHz) 2	10 MHz	100 MHz	500 MHz	인덕턴스 최소 (nH) 3	Irms (mA) 4	DCR max (Ω) 5	절연 전압 (Vrms) 6
0805USBN-121MR_	2	0.14 @ 2.6 GHz	6.4	0.04	0.50	5.00	14	500	0.110	250
0805USBN-271MR_	2	0.30 @ 2.5 GHz	5.1	0.09	1.40	10.00	30	500	0.140	250
0805USBN-481MR_	2	0.60 @ 3.0 GHz	3.4	0.13	3.50	14.70	53	500	0.220	250
0805USBN-701MR_	2	0.79 @ 2.0 GHz	3.4	0.18	5.30	17.40	77	500	0.235	250
0805USBN-941MR_	2	1.28 @ 1.4 GHz	3.5	0.30	7.60	21.10	105	500	0.270	250
0805USBN-132MR_	2	1.61 @ 1.2 GHz	2.3	0.50	10.00	24.40	140	500	0.320	250
0805USBN-162MR_	2	2.00 @ 1.0 GHz	1.5	0.78	12.10	27.30	182	450	0.370	250
0805USBN-222MR_	2	2.47 @ 0.96 GHz	1.7	1.14	14.00	30.00	252	350	0.630	250

메모

When ordering, please specify packaging code: e.g. 0805USBN-222MRC
Frequency at which the differential mode attenuation equals 3 dB
Inductance measured at 100 MHz, with windings connected in parallel, using an Agilent/HP 4286A impedance analyzer and a Coilcraft SMD-A fixture.
Irms: Current per winding that causes a 15°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.
DCR is specified per winding at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
250 Vrms, 1 minute interwinding isolation (hipot).

종단 처리:

Matte tin over nickel over silver-palladium-glass frit.

패키지:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C.
D = 13″ machine-ready reel. EIA-481 embossed plastic tape (7500 parts per full reel).

환경

환경:

RoHS 준수 , 할로겐 프리

주변 온도 범위:

–40°C to +125°C with Irms current

보관 온도 범위:

Component: –40°C to +140°C.
Tape and reel packaging: –40°C to +80°C

최고 부품 온도:

140°C

고장 비율(FIT) / 평균 고장률(MTBF):

See FIT/MTBF Calculations

성능 곡선

Attenuation (Ref: 50 Ohms)

Impedance vs Frequency

회로도

물리적 특성

테이프 및 릴 사양

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
2000	7500*	178/330	60/100	13	14,4	8,4	8	4	4	2	1,07	0,23

*Special order

일반 사양

코어 소재:

Ferrite

중량:

9.0 – 13.0 mg

납땜/세척

수분 민감도(MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

납땜 열 내성:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.

PCB 세척:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

0805USBN Series

Low-profile Common Mode Chokes