View:
소개
사양
환경
성능 곡선
회로도
물리적 특성
테이프 및 릴
납땜/세척

Datasheet 3D 모델

PDLF Series

Surface Mount Data Line EMI Filters

Our PDLF Series data line EMI filters eliminate conducted EMI in data line applications by providing common mode and differential mode noise attenuation. They reduce noise by a factor of 32 from 15 MHz to 300 MHz and have excellent environmental stability.

Eliminates the problem of conducted EMI in data line applications
Provide common mode and differential mode noise attenuation
Reduce noise by a factor of 32 from 15 MHz to 300 MHz
Excellent environmental stability and low cost
Available in 4-, 3- and 2-line versions
300 Vrms isolation

Consider our CDF series for 10- and 8-line applications

Need parts for space, military or other critical applications?
See Coilcraft ST515FRD Series

지금 구매:

부품 번호

내 부품 찾기

개수	단품 가격
1	$2.74
100	$2.36
250	$2.05
500	$1.23
1000	$0.96
2500	$0.83
5000	$0.76

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

Termination

L = Tin-silver-copper over tin over nickel over

Packaging

C = 7" machine-ready reel

. 재고 보유 중, 당일 발송 가능.

샘플 신청:

부품 번호

내 부품 찾기

설계자용 키트:

키트	값	가격
D303	17 (4 of each)	$75.00

사양

Electrical specifications at 25°C.

부품 번호 1	라인	공통 모드 피크 임피던스 (kΩ)	차단 주파수 (MHz) 2	인덕턴스 최소 (µH) 3	Irms (mA) 4	DCR max (mΩ) 5	절연 전압 (Vrms) 6
부품 번호 1	라인	공통 모드 피크 임피던스 (kΩ)	차단 주파수 (MHz) 2	인덕턴스 최소 (µH) 3	Irms (mA) 4	DCR max (mΩ) 5	절연 전압 (Vrms) 6
PDLF4000L_	4	0.949 @ 210 MHz	1100	5.0	100	250	300
PDLF4500L_	4	0.848 @ 200 MHz	880	5.0	500	200	300
PDLF3000L_	3	0.901 @ 280 MHz	1400	5.0	100	250	300
PDLF3500L_	3	0.910 @ 210 MHz	1100	5.0	500	200	300
PDLF2000L_	2	0.958 @ 280 MHz	1300	5.0	100	250	300
PDLF2500L_	2	0.929 @ 250 MHz	1200	5.0	500	200	300

메모

When ordering, please specify packaging code: e.g. PDLF2500LC.
Frequency at which the differential mode attenuation equals 3 dB
Inductance shown for each winding, measured at 130 kHz.
Irms: Current rating for each line.
DCR is for each winding, measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
Interwinding isolation (hipot) tested for one minute.

종단 처리:

RoHS compliant tin-silver-copper over tin over nickel over phos bronze. Other terminations available at additional cost.

패키지:

C = 7″ machine ready reel. EIA-481 embossed plastic tape (500 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13″ machine ready reel. EIA-481 embossed plastic tape (2000 parts per full reel).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C.

환경

환경:

RoHS 준수

주변 온도 범위:

–40°C to +85°C

보관 온도 범위:

Component: –40°C to +85°C.
Tape and reel packaging: –40°C to +80°C

고장 비율(FIT) / 평균 고장률(MTBF):

See FIT/MTBF Calculations

성능 곡선

Typical Impedance

Typical Response

회로도

PDLF4000/4500	PDLF3000/3500	PDLF2000/2500

물리적 특성

테이프 및 릴 사양

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
500	2000*	178/330	60/100	13	22,4	16,4	16	8	4	2	4,4	0,35

* Special order

일반 사양

코어 소재:

Ferrite

중량:

183 – 201 mg

납땜/세척

수분 민감도(MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

납땜 열 내성:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.

PCB 세척:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

PDLF Series

Surface Mount Data Line EMI Filters