View:
소개
사양
환경
성능 곡선
회로도
물리적 특성
테이프 및 릴
납땜/세척

3D Model Datasheet

MSD1514 Series

Common Mode Chokes

Our MSD1514 Series common mode chokes provide both common mode and differential mode filtering in a single device. They are ideal for use in both power line and signal line applications, providing 500 Vrms, one minute winding-to-winding isolation.

Common mode and differential mode filtering in a single device
Ideal for use in both power line and signal line applications
Up to 100 MHz differential mode cutoff frequency
500 Vrms, one minute winding-to-winding isolation

Refer to Designing Common Mode Filters for design guidance.

지금 구매:

부품 번호

내 부품 찾기

개수	단품 가격
1	$4.39
175	$3.86
700	$1.74
1400	$1.36
2800	$1.17
5250	$1.08

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

Tolerance

M = 20%

Termination

E = Matte tin over nickel

Packaging

D = 13" machine-ready reel

. 재고 보유 중, 당일 발송 가능.

샘플 신청:

부품 번호

내 부품 찾기

사양

Electrical specifications at 25°C.

부품 번호 1	라인	공통 모드 피크 임피던스 (kΩ)	차단 주파수 (MHz) 2	인덕턴스 최소 (µH) 3	Irms (A) 4	DCR max (Ω) 5	절연 전압 (Vrms) 6
부품 번호 1	라인	공통 모드 피크 임피던스 (kΩ)	차단 주파수 (MHz) 2	인덕턴스 최소 (µH) 3	Irms (A) 4	DCR max (Ω) 5	절연 전압 (Vrms) 6
MSD1514-252ME_	2	2.96 @ 35.0 MHz	100	2.5	6.00	0.012	500
MSD1514-472ME_	2	4.02 @ 23.0 MHz	18.0	4.7	5.40	0.014	500
MSD1514-103ME_	2	6.54 @ 14.0 MHz	17.0	10	4.80	0.018	500
MSD1514-123ME_	2	7.83 @ 14.0 MHz	26.0	12	4.70	0.022	500
MSD1514-153ME_	2	11.70 @ 11.0 MHz	9.3	15	4.10	0.028	500
MSD1514-223ME_	2	17.10 @ 8.1 MHz	14.0	22	3.60	0.036	500
MSD1514-273ME_	2	17.90 @ 7.2 MHz	10.0	27	3.50	0.039	500
MSD1514-333ME_	2	22.60 @ 7.1 MHz	21.0	33	3.00	0.052	500
MSD1514-473ME_	2	47.60 @ 6.4 MHz	5.3	47	2.60	0.075	500
MSD1514-683ME_	2	37.80 @ 4.3 MHz	8.8	68	2.20	0.090	500
MSD1514-104KE_	2	59.80 @ 3.7 MHz	11.0	100	2.00	0.126	500
MSD1514-224KE_	2	85.60 @ 2.5 MHz	10.0	220	1.30	0.287	500
MSD1514-334KE_	2	58.00 @ 2.0 MHz	7.3	330	1.20	0.367	500
MSD1514-474KE_	2	101.90 @ 1.6 MHz	5.3	470	0.92	0.550	500
MSD1514-105KE_	2	157.90 @ 1.1 MHz	4.9	1000	0.66	1.250	500

메모

When ordering, please specify termination and packaging codes: e.g. MSD1514-105KED
Frequency at which the differential mode attenuation equals 3 dB
Inductance shown for each winding, measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR meter or equivalent.
Irms: Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.
DCR is for each winding, measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
Interwinding isolation (hipot) tested for one minute.

종단 처리:

E = RoHS compliant matte tin over nickel over phos bronze.
Q = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
P = non-RoHS tin-lead (63/37). (Special order, added cost)

패키지:

D = 13″ machine-ready reel. EIA-481 embossed plastic tape (175 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.

환경

환경:

RoHS 준수 , 할로겐 프리

주변 온도 범위:

–40°C to +85°C with (40°C rise) Irms current

보관 온도 범위:

Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C

최고 부품 온도:

+125°C (ambient + temp rise)

고장 비율(FIT) / 평균 고장률(MTBF):

See FIT/MTBF Calculations

성능 곡선

Typical Attenuation (Ref: 50 Ohms)

Typical Impedance vs Frequency

회로도

물리적 특성

테이프 및 릴 사양

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)						Orientation
13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
175	330	100	13	38,4	32,4	32	24	4	2	14.3	0,5

일반 사양

코어 소재:

Ferrite

중량:

9.0 – 11.8 g

Winding to Winding Isolation:

500 Vrms, one minute

납땜/세척

수분 민감도(MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

납땜 열 내성:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.

PCB 세척:

Tested with pure water or alcohol only. More info.

MSD1514 Series

Common Mode Chokes