View:
소개
사양
환경
성능 곡선
회로도
물리적 특성
테이프 및 릴
납땜/세척

Datasheet 3D 모델

M2022 Series

Common Mode EMI/RFI Filter

Our M2022 Series common mode EMI/RFI filters provide both common-mode and differential-mode filtering in a single 1812-size surface mount package. They are available in standard (-AL), low-profile (-ALPL) and shielded (-ASL) versions, all offering excellent isolation, environmental stability and low cost.

Common mode and differential mode filtering in a single device
Compact 1812-size surface mount package
Standard (-AL), low profile (-ALPL) and shielded (-ASL) versions available
Excellent isolation, environmental stability and low cost
RoHS-compliant. 260°C compatible. Gold over nickel over moly-manganese terminals

Refer to Designing Common Mode Filters for design guidance.

지금 구매:

부품 번호

내 부품 찾기

개수	단품 가격
1	$2.08
300	$1.59
600	$1.19
1200	$0.88
2400	$0.68
4800	$0.52

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

Termination

L = Gold over nickel over moly-manganese

Packaging

C = 7" machine-ready reel

. 재고 보유 중, 당일 발송 가능.

샘플 신청:

부품 번호

내 부품 찾기

사양

Electrical specifications at 25°C.

부품 번호 1	라인	공통 모드 피크 임피던스 (kΩ)	차단 주파수 (MHz) 2	인덕턴스 최소 (µH) 3	Irms (mA)	DCR max (mΩ) 4	절연 전압 (Vrms) 5
부품 번호 1	라인	공통 모드 피크 임피던스 (kΩ)	차단 주파수 (MHz) 2	인덕턴스 최소 (µH) 3	Irms (mA)	DCR max (mΩ) 4	절연 전압 (Vrms) 5
M2022-AL_	2	38.3 @ 120 MHz	170	3.8	500	800	50
M2022-ALPL_	2	40.0 @ 160 MHz	120	3.6	500	990	50
M2022-ASL_	2	32.0 @ 66.0 MHz	140	11.5	500	850	50

메모

When ordering, please specify packaging codes: e.g. M2022-ALC, M2022-ALPLC, or M2022-ASLC.
Frequency at which the differential mode attenuation equals 3 dB
Inductance is per winding, measured at 10 MHz.
DCR is per winding, measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
Winding to winding isolation (hipot) tested for one minute.

종단 처리:

RoHS compliant gold over nickel over moly-manganese.

패키지:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (600 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13″ machine-ready reel. EIA-481 embossed plastic tape (2200 parts per full reel).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C.

환경

환경:

RoHS 준수

주변 온도 범위:

–40°C to +85°C

보관 온도 범위:

Component: –40°C to +85°C
Tape and reel packaging: –40°C to +80°C

고장 비율(FIT) / 평균 고장률(MTBF):

See FIT/MTBF Calculations

성능 곡선

Attenuation (Ref: 50 Ohms)

Impedance vs Frequency

회로도

물리적 특성

M2022-A, M2022-ALP

M2022-AS
m2022as-(1).gif

	A max	B max	C max	D ref	E ref	F ref	G min	H
M2022-AL	0.195	0.150	0.135	0.070	0.100	0.178	0.04	0.03
M2022-AL	4,95	3,81	3,43	1,78	2,54	4,52	1,02	0,76
M2022-ALPL	0.195	0.150	0.079	0.070	0.100	0.178	0.04	0.03
M2022-ALPL	4,95	3,81	2,01	1,78	2,54	4,52	1,02	0,76
M2022-ASL	0.231	0.196	0.150	0.107	0.100	0.178	0.04	0.03
M2022-ASL	5,87	4,98	3,81	2,72	2,54	4,52	1,02	0,76

테이프 및 릴 사양

Parts per reel			Reel dimensions (mm)					Tape dimensions (mm)
	7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
M2022-AL	600	2200*	178/330	60/100	13	18,4	12,4	12	8	4	2	3,7	0,3
M2022-ALPL	600	2200*	178/330	60/100	13	18,4	12,4	12	8	4	2	2,25	0,3
M2022-ASL	600	2200*	178/330	60/100	13	18,4	12,4	12	8	4	2	3,94	0,25

* Special order

일반 사양

코어 소재:

Ferrite

중량:

M2022-AL 155 mg; M2022-ALPL 85.5 mg; M2022-ASL 319 mg

패키지:

600 per 7″ reel; 2200 per 13″ reel
Plastic tape: 12 mm wide, 8 mm pocket spacing
M2022-AL: 0.3 mm thick, 3.7 mm pocket depth
M2022-ALP: 0.3 mm thick, 2.25 mm pocket depth
M2022-AS: 0.25 mm thick, 3.94 mm pocket depth

납땜/세척

수분 민감도(MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

납땜 열 내성:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.

PCB 세척:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

M2022 Series

Common Mode EMI/RFI Filter