DLF Series

Data Line EMI Filters

Our DLF Series data line EMI filters provide common mode and differential mode filtering in a single component. They reduce conducted noise by a factor of 32 from 5 MHz to 300 MHz and pass data frequencies below 200 MHz with minimal attenuation.

Common mode and differential mode filtering in a single component
Reduce conducted noise by a factor of 32 from 5 MHz to 300 MHz
Data frequencies below 200 MHz pass with minimal attenuation
Available in 8, 4, 3 and 2 wire versions
Meets IEC 695-2-2 needle flame test requirements
AEC-Q200 Grade 3 (−40°C to +85°C)

지금 구매:

부품 번호

내 부품 찾기

개수	단품 가격
1	$8.59
100	$7.02
350	$5.26
700	$3.16
1400	$2.46
2800	$2.11
5000	$1.93

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

Cover

Standard

Termination

L = Tin-silver

. 재고 보유 중, 당일 발송 가능.

샘플 신청:

부품 번호

내 부품 찾기

설계자용 키트:

키트	값	가격
D303	17 (4 of each)	$75.00

사양

Electrical specifications at 25°C.

부품 번호 1	라인	공통 모드 피크 임피던스 (kΩ)	차단 주파수 (MHz) 2	인덕턴스 최소 (µH) 3	Irms (mA)	DCR max (mΩ) 4	절연 전압 (Vrms) 5
부품 번호 1	라인	공통 모드 피크 임피던스 (kΩ)	차단 주파수 (MHz) 2	인덕턴스 최소 (µH) 3	Irms (mA)	DCR max (mΩ) 4	절연 전압 (Vrms) 5
DLF 8000L	8	2.03 @ 8.3 MHz	200	28	100	100	300
DLF 8500L	8	0.60 @ 40 MHz	1000	5	500	45	300
DLF 4000L	4	2.13 @ 12 MHz	390	28	100	100	300
DLF 4500L	4	1.62 @ 14 MHz	730	24	500	45	300
DLF 3000L	3	1.98 @ 13 MHz	650	28	100	100	300
DLF 3500L	3	1.45 @ 15 MHz	670	24	500	45	300
DLF 2000L	2	2.03 @ 14 MHz	660	28	100	100	300
DLF 2500L	2	1.55 @ 14 MHz	610	24	500	45	300

메모

For optional cover add "C" to part number just before the "L": e.g. DLF 8500CL. Not available on 3500, 4000 and 4500 parts.
Frequency at which the differential mode attenuation equals 3 dB.
Inductance is per winding.
DCR is per winding, measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
Interwinding isolation measured for one minute.

종단 처리:

Tin-silver over tin over phos bronze.

환경

환경:

RoHS 준수

주변 온도 범위:

–40°C to +85°C

보관 온도 범위:

Component: –40°C to +85°C.
Tape and reel packaging: –40°C to +80°C

고장 비율(FIT) / 평균 고장률(MTBF):

See FIT/MTBF Calculations

성능 곡선

Attenuation (Ref: 50 Ohms)

Impedance vs Frequency

회로도

물리적 특성

Without Optional Cover

With Optional Cover

Part Number	Weight typ (g)	Packaging
DLF 2000L	0.74	75 per tube
DLF 2000CL	1.32	64 per tube
DLF 2500L	0.78	75 per tube
DLF 2500CL	1.36	64 per tube
DLF 3000L	0.83	75 per tube
DLF 3000CL	1.41	64 per tube
DLF 3500L	0.91	75 per tube
DLF 4000L	0.95	55 per tube
DLF 4500L	1.09	55 per tube
DLF 8000L	1.56	27 per tube
DLF 8000CL	2.7	25 per tube
DLF 8500L	2.22	27 per tube
DLF 8500CL	3.36	25 per tube

일반 사양

코어 소재:

Ferrite

중량:

0.74 g - 3.36 g

납땜/세척

수분 민감도(MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

납땜 열 내성:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.

PCB 세척:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

DLF Series

Data Line EMI Filters