사이트 설정

창고
언어 설정
통화 설정
리소스
비디오 라이브러리
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

1210CAN Series

Common Mode Choke

RoHS 준수 할로겐 프리 AEC-Q flag
Our 1210CAN Series filters a broad frequency range of common mode noise with 50% lower DCR and higher current handling than other CANbus chokes in the market. They are designed for common mode noise suppression on CAN or CAN FD lines in automotive or general industrial automation applications, and can also be used for FlexRay automotive bus systems.
  • Designed for common mode noise suppression on CAN or CAN FD in automotive or general industrial automation applications
  • 51μH value meets IEC 6228-3 (CDV Annex D) requirements
  • Can be used for FlexRay automotive bus system
  • Filters a broad frequency range of common mode noise
  • Low profile 1210 footprint: 3.30 × 2.67 × 3.0 mm
  • AEC-Q200 Grade 1 (−40°C to +125°C)

지금 구매:
개수 단품 가격
1 $1.20
100 $1.10
250 $0.99
500 $0.89
1000 $0.78
2500 $0.68
5000 $0.58

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

. 재고 보유 중, 당일 발송 가능.
샘플 신청:

사양

Electrical specifications at 25°C.

부품 번호 1 라인 인덕턴스 (µH) 2
(허용 오차: ±30%)
Irms (mA) 3 DCR max (Ω) 4 절연
전압 (Vrms) 5
1210CAN-113NR_ 2 11 300 0.45 250
1210CAN-223NR_ 2 22 300 0.60 250
1210CAN-513NR_ 2 51 200 1.35 250
1210CAN-104NR_ 2 100 100 3.70 250
메모
  1. When ordering, please specify packaging code: e.g. 1210CAN-104NRC
  2. Inductance is per winding, measured at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/ HP 4263B LCR meter and a Coilcraft CCF 1190 fixture.
  3. Equal current when applied to each winding simultaneously that causes a 25°C temperature rise from 125°C ambient. This information is for reference only and does not represent absolute maximum ratings.
  4. DCR is specified per winding, measured 25°C on a Keithley 580 micro-ohmmeter and a Coilcraft CCF 858 fixture. For other operating temperatures, use this DCR at Temperature calculator.
  5. Winding to winding isolation (hipot) tested for one minute.

종단 처리:

  • RoHS compliant matte tin over nickel over silver palladium-glass frit.

패키지:

  • C = 7" machine-ready reel. EIA-481 embossed plastic tape (750 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • D = 13" machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (3000 parts per full reel).
환경
환경:
RoHS 준수 , 할로겐 프리
주변 온도 범위:
–40°C to +125°C with Irms current
보관 온도 범위:
Component: –40°C to +150°C.
Tape and reel packaging: –40°C to +80°C
최고 부품 온도:
+150°C
고장 비율(FIT) / 평균 고장률(MTBF):

성능 곡선

Attenuation

Impedance vs Frequency

물리적 특성

1210cand.gif

dims_inches_mm.gif

테이프 및 릴 사양

tapereel_pl.gif


 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
7" (178 mm) 13" (330 mm) A B C D E W P Po P1 H T part_or_i.gif
750 3000* 178/330 60/100 13 18,4 12,4 12 8 4 2 2,72 0,25
* Special order

일반 사양

코어 소재:
Ferrite
중량:
100 – 120 mg

납땜/세척

수분 민감도(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
납땜 열 내성:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.
PCB 세척:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

관련 제품 시리즈