サイトの設定

倉庫
言語の設定
通貨の設定
製品
リソース
ビデオライブラリ
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

POE300F-24

POE300F-24LD

RoHS準拠

部品の詳細情報と仕様について

シリーズへ移動
今すぐ購入:
個数 単価
1 $3.98
175 $3.66
700 $3.37
1400 $2.82
2800 $2.55
5000 $2.33

大量のご注文または在庫のない商品については、お見積もりをご依頼ください

. 在庫あり、即日出荷可能.
サンプルを依頼:
デザイナーズキット:
キット 価格
C398 5 (3 of each) $50.00

仕様

Electrical specifications at 25°C.

部品番号 1
(Hover for schematics)
電力 (W) インダクタンス
@0A (µH) 2
(公差: ±10%)
最小
インダクタンス@   2.6 A (µH) 3
DCR max (Ω) 4 漏れ
インダクタンス
最大 (µH) 5
巻数比 6 絶縁
電圧 (Vrms) 7
二次
出力 (V, A) 8
Pri Sec Aux Pri : Sec : Aux
POE300F-24L_ 30 42.0 37.8 0.060 0.055 0.195 0.310 1 : 0.67 : 0.33 1500 24 V , 1.25 A
メモ
  1. When ordering, please specify packaging code: e.g. POE300F-24LD
  2. Inductance is for the primary, measured at 250 kHz, 0.7 Vrms, 0 Adc.
  3. Ipk is the peak primary current drawn at minimum input voltage.
  4. DCR is with the windings connected in parallel, measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
  5. Leakage inductance is for the primary with the secondary windings shorted.
  6. Turns ratio is with the primary and the secondary windings connected in parallel.
  7. Isolation: 1500 Vrms primary to secondary; 500 Vrms primary to auxiliary.
  8. Output is with the secondary windings connected in parallel. Output of the auxiliary winding is 12 V.

終端処理:

  • RoHS-compliant. 260°C compatible. Tin-silver over tin over nickel over phos bronze terminations. Other terminations available at additional cost.

パッケージ:

  • D = 13″ machine-ready reel. EIA-481 embossed plastic tape (175 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.
環境
環境:
RoHS準拠
周囲温度範囲:
−40°C to +125°C
保管温度範囲:
Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
時間内の障害(FIT)/平均障害間隔(MTBF):

回路図

poe300s.gif

The primary windings and the
secondary windings are to be
connected in parallel on the PC board.

物理的特徴

poe300d.gif

dims_inches_mm-(3).gif

テープ&リール仕様

tapereel_pl.gif
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_c.gif
175 330 100 13 50,4 44,4 44 32 4 2 11,9 0,4

一般仕様

コア材料:
Ferrite
重量:
11.9 g
パッケージ:
175 per 13″ reel Plastic tape: 44 mm wide, 0.4 mm thick, 32 mm pocket spacing, 11.9 mm pocket depth

関連製品

関連製品シリーズ