サイトの設定

倉庫
言語の設定
通貨の設定
製品
リソース
ビデオライブラリ
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

JA4456-DL

JA4456-DLD

RoHS準拠

部品の詳細情報と仕様について

シリーズへ移動
今すぐ購入:
個数 単価
1 $5.22
175 $4.86
700 $4.23
1400 $3.30
2800 $2.84
5000 $2.58

大量のご注文または在庫のない商品については、お見積もりをご依頼ください

. 在庫あり、即日出荷可能.
サンプルを依頼:

一般的な用途

Texas Instruments TPS23752に対応

入力電圧 出力 1 電力 Fsw
Sec Bias
36 V 57 V 5 V , 5 A 12 V , 0.02 A 25 W 250 kHz

仕様

Electrical specifications at 25°C.

部品番号 2
(Hover for schematics)
インダクタンス
@0A (µH) 3
(公差: ±10%)
DCR max (Ω) 5 漏れ
インダクタンス
最大 (µH) 6
巻数比 7 キャパシタンス
max (pF)
絶縁
電圧 (Vrms) 8
Pri Sec Bias Pri : Sec : Bias
JA4456-DL_ 70 0.070 0.0043 0.31 0.615 1 : 0.182 : 0.409 158 1500
メモ
  1. Output of the secondary is with all windings connected in parallel. Bias winding output is 12 V, 20 mA.
  2. When ordering, please specify termination and packaging codes: JA4456-DLD.
  3. Inductance is for the primary, measured at 250 kHz, 0.5 Vrms.
  4. Peak primary current drawn at minimum input voltage.
  5. DCR for the primary and secondary are with the windings connected in parallel.
  6. Leakage inductance is for the primary windings with all the secondary windings shorted.
  7. Turns ratios are with the primary windings and secondary windings connected in parallel.
  8. 1500 Vrms, one minute isolation (hipot) primary and bias to secondary; 500 Vrms isolation primary to bias; 750 Vrms isolation all pins to the core.

終端処理:

  • RoHS-compliant  260°C compatible. Tin-silver over tin over nickel over phos bronze terminations. Other terminations available at additional cost.

パッケージ:

  • D = 13″ machine-ready reel. EIA-481 embossed plastic tape (175 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.
環境
環境:
RoHS準拠
周囲温度範囲:
–40°C to +125°C
保管温度範囲:
Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
時間内の障害(FIT)/平均障害間隔(MTBF):

回路図

ja4456s.gif
 

Primary windings and secondary windings
to be connected in parallel on PC board.

物理的特徴

ja4456d.gif


dims_inches_mm-(6).gif

テープ&リール仕様

tapereel_pl-(57).gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_c-(1).gif
175 330 100 13 50,4 44,4 44 32 4 2 12,0 0,5

一般仕様

コア材料:
Ferrite
重量:
11.7 g
パッケージ:
175 per 13″ reel Plastic tape: 44 mm wide, 0.5 mm thick, 32 mm pocket spacing, 12.0 mm pocket depth PCB washing Tested to MIL-STD-202 Method

はんだ付け/洗浄

湿度感度レベル(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
はんだに対する耐熱性:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。
PCB洗浄:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf.

関連製品シリーズ