View:
はじめに
仕様
環境
性能曲線
回路図
物理的特徴
テープ＆リール
はんだ付け/洗浄

3D Model Datasheet S-Param

MSD1260T-105

Name: MSD1260T-105KLD
Brand: Coilcraft
SKU: MSD1260T-105KLD
Price: 0.90 USD
Availability: InStock

MSD1260T-105KLD

部品の詳細情報と仕様について

シリーズへ移動

今すぐ購入:

個数	単価
1	$2.93
250	$1.91
500	$1.16
1000	$0.90
2500	$0.77
5000	$0.72

大量のご注文または在庫のない商品については、お見積もりをご依頼ください。

Tolerance

K = 10%

Termination

L = Matte tin over nickel

Packaging

D = 13" machine-ready reel

. 在庫あり、即日出荷可能.

サンプルを依頼:

仕様

Electrical specifications at 25°C.

フライバック用途

部品番号 1 (Hover for schematics)	インダクタンス (µH) 2 (公差: ±10%)	DCR max (Ω) 3	絶縁電圧 (V)	漏れインダクタンス (µH) 5	巻数比
部品番号 1 (Hover for schematics)	インダクタンス (µH) 2 (公差: ±10%)	DCR max (Ω) 3	絶縁電圧 (V)	漏れインダクタンス (µH) 5	巻数比
MSD1260T-105KL_	1000	3.1	500	4.3	1 : 1

SEPIC用途

部品番号 1 (Hover for schematics)	インダクタンス (µH) 2 (公差: ±10%)	DCR max (Ω) 3	SRF typ (MHz) 4	結合係数	漏れインダクタンス (µH) 5	Isat (A) 6			Irms (A)
部品番号 1 (Hover for schematics)	インダクタンス (µH) 2 (公差: ±10%)	DCR max (Ω) 3	SRF typ (MHz) 4	結合係数	漏れインダクタンス (µH) 5	10% drop	20% drop	30% drop	両方の巻線 7	単一巻線 8
MSD1260T-105KL_	1000	3.1	2.4	0.98	4.3	0.59	0.67	0.73	0.34	0.49

メモ

When ordering, please specify termination and packaging codes: MSD1260T-105KLD.
Inductance shown for each winding, measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR meter or equivalent. When leads are connected in parallel, inductance is the same value. When leads are connected in series, inductance is four times the value.
DCR is for each winding. When leads are connected in parallel, DCR is half the value. When leads are connected in series, DCR is twice the value.
SRF measured using an Agilent/HP 4191A or equivalent. When leads are connected in parallel, SRF is the same value.
Leakage inductance is for L1 and is measured with L2 shorted.
Isat: DC current, at which the inductance drops the specified amount from its value without current. It is the sum of the current flowing in both windings.
Irms, both windings: Equal current when applied to each winding simultaneously that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Determine temperature rise.
Irms, one winding: Current when applied to one winding that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Determine temperature rise.

終端処理:

L = RoHS compliant matte tin over nickel over phos bronze.
T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
S = non-RoHS tin-lead (63/37). (Special order, added cost)

パッケージ:

D = 13″ machine-ready reel. EIA-481 embossed plastic tape (500 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.

環境

環境:

RoHS準拠

周囲温度範囲:

–40°C to +125°C with Irms current

保管温度範囲:

Component: –40°C to +165°C.
Tape and reel packaging: –40°C to +80°C

最大部品温度:

+165°C (ambient + temp rise)

時間内の障害（FIT）/平均障害間隔（MTBF）:

See FIT/MTBF Calculations

性能曲線

Inductance vs Current

Inductance vs Frequency

回路図

物理的特徴

テープ＆リール仕様

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)						Orientation
13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
500	330	100	13	30,4	24,4	24	16	4	2	6,9	0,5

一般仕様

コア材料:

Ferrite

重量:

2.8 – 3.2 g

パッケージ:

500/13″ reel; Plastic tape: 24 mm wide, 0.5 mm thick, 16 mm pocket spacing, 6.9 mm pocket depth

Winding to Winding Isolation:

500 Vrms, one minute

はんだ付け/洗浄

湿度感度レベル（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

はんだに対する耐熱性:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。

PCB洗浄:

Tested with pure water or alcohol only. More info.

関連製品

倉庫

言語の設定

通貨の設定

MSD1260T-105

MSD1260T-105KLD

この部品をシェアする

選択された構成はご購入いただけません

仕様

フライバック用途

SEPIC用途

終端処理:

パッケージ:

性能曲線

Inductance vs Current

Inductance vs Frequency

回路図

物理的特徴

テープ＆リール仕様

一般仕様

はんだ付け/洗浄

関連製品

MSD1260T-103

MSD1260T-104

MSD1260T-123

MSD1260T-124

MSD1260T-153

MSD1260T-154

MSD1260T-183

MSD1260T-184

MSD1260T-223

MSD1260T-224

MSD1260T-273

MSD1260T-274

MSD1260T-332

MSD1260T-333

MSD1260T-334

MSD1260T-393

MSD1260T-394

MSD1260T-472

MSD1260T-473

MSD1260T-474

MSD1260T-562

MSD1260T-563

MSD1260T-564

MSD1260T-682

MSD1260T-683

MSD1260T-684

MSD1260T-822

MSD1260T-823

MSD1260T-824

警告