View:
はじめに
仕様
環境
性能曲線
回路図
物理的特徴
テープ＆リール
はんだ付け/洗浄

3D Model Datasheet

CST7030-050L

Name: CST7030-050LC
Brand: Coilcraft
SKU: CST7030-050LC
Price: 1.39 USD
Availability: InStock

CST7030-050LC

部品の詳細情報と仕様について

シリーズへ移動

今すぐ購入:

個数	単価
1	$1.87
200	$1.59
600	$1.39
1200	$1.09
3000	$0.96
6000	$0.87

大量のご注文または在庫のない商品については、お見積もりをご依頼ください。

Packaging

C = 7" machine-ready reel

. 在庫あり、即日出荷可能.

サンプルを依頼:

仕様

Electrical specifications at 25°C.

部品番号 1 (Hover for schematics)	最小インダクタンス (mH) 2	DCR max (Ω)		巻数比	電圧ー時間製品 (V-µs) 3	周波数 (kHz) 4	電流 (A) 5	終端抵抗 R_T (Ω) 6	絶縁電圧 (Vrms) 7
部品番号 1 (Hover for schematics)	最小インダクタンス (mH) 2	Pri	Sec	Pri : Sec	電圧ー時間製品 (V-µs) 3	周波数 (kHz) 4	電流 (A) 5	終端抵抗 R_T (Ω) 6	絶縁電圧 (Vrms) 7
CST7030-050L_	0.333	0.0015	2.8	1 : 50	16	31 — >1000	20.0	2.5	500

メモ

When ordering, please specify packaging code: e.g.CST7030-150LC
Inductance measured between secondary pins at 100 kHz, 0.1 Vrms, 0 Adc.
Volt-time product is for the secondary, between pin 1 and 2.
For specific questions regarding frequency range, please contact us at [email protected].
Primary current of 20 A causes less than 25°C temperature rise from 25°C ambient. Higher current causes a greater temperature rise (see Temperature Rise vs Current curve).
Terminating resistance (R_T) value is based on 1 Volt output with 20 Amps flowing through the primary. Varying terminating resistance increases or decreases output Voltage/Ampere according to the following equation:
R_T (Ohms) = V_out × N_sec / I_in.
500 Vrms, 1 minute isolation (hipot) winding to winding.

終端処理:

RoHS compliant tin-silver-copper over tin over nickel over copper

パッケージ:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (600 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C.
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (2500 parts per full reel).

環境

環境:

RoHS準拠

周囲温度範囲:

–40°C to +125°C

保管温度範囲:

Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C

最大部品温度:

+165°C (ambient + temp rise)

時間内の障害（FIT）/平均障害間隔（MTBF）:

See FIT/MTBF Calculations

性能曲線

Temperature vs Current

回路図

物理的特徴

テープ＆リール仕様

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
600	2500*	178/330	60/100	13	38,4	32,4	16	20	4	2	10,6	0.35

一般仕様

コア材料:

Ferrite

重量:

0.16 g

パッケージ:

600/7″ reel; 2500/13″ reel Plastic tape: 16 mm wide, 0.35 mm thick, 8 mm pocket spacing, 3.0 mm pocket depth

はんだ付け/洗浄

湿度感度レベル（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

はんだに対する耐熱性:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。

PCB洗浄:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More Info.

CST7030-050L

CST7030-050LC