View:
はじめに
仕様
環境
性能曲線
回路図
物理的特徴
テープ＆リール
はんだ付け/洗浄

3D Model Datasheet

CST2010V Series

SMT Current Sense Transformers

High isolation voltage CST2010 current sense transformer
Sensed current up to 40 A
Designed for use up to 1 MHz and above
2100 Vrms, one minute isolation (hipot) between windings
AEC-Q200 Grade 1 (−40°C to +125°C)
Designed to comply with IEC61558-1, IEC62369-1, and IEC60664-1 for providing Reinforced or Basic Insulation
- 5.5 mm creepage and 5.0 mm clearance to meet reinforced insulation for working voltage up to 136 V and basic insulation for working voltage up to 550 V with material group 3, pollution degree P2, OVCII, and altitude up to 2 km.

今すぐ購入:

個数	単価
1	$2.93
250	$2.50
500	$2.20
1000	$1.90
2500	$1.62
5000	$1.49

大量のご注文または在庫のない商品については、お見積もりをご依頼ください。

Packaging

D = 13" machine-ready reel

. 在庫あり、即日出荷可能.

サンプルを依頼:

仕様

Electrical specifications at 25°C.

部品番号 (Hover for schematics)	インダクタンス＠0A (mH) 1 (公差: ±30%)	DCR max (Ω) 2		巻数比	電圧ー時間製品 (V-µs) 3	周波数 (kHz) 4	電流 (A) 5	終端抵抗 R_T (Ω) 6	絶縁電圧 (Vrms) 7
部品番号 (Hover for schematics)	インダクタンス＠0A (mH) 1 (公差: ±30%)	Pri	Sec	Pri : Sec	電圧ー時間製品 (V-µs) 3	周波数 (kHz) 4	電流 (A) 5	終端抵抗 R_T (Ω) 6	絶縁電圧 (Vrms) 7
CST2010V-150LD	19	0.00036	3.6	1 : 150	381	1 — >1000	40	3.8	2100

メモ

Inductance measured between secondary pins at 1 kHz, 0.1 Vrms, 0 Adc.
DCR at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
Volt-time product is for the secondary, between pin 2 and 4.
For specific questions regarding frequency range, please contact us at [email protected].
Primary current of 40 A causes approximately 40°C temperature rise from 25°C ambient. Higher current causes a greater temperature rise (see Temperature Rise vs Current curve).
Terminating resistance (R_T) value is based on 1 Volt output with 40 Amps flowing through the primary. Varying terminating resistance increases or decreases output Voltage/Ampere according to the following equation:
R_T= V_out × N_sec / I_in.
2100 Vrms, one minute isolation (hipot) winding to winding.

終端処理:

RoHS compliant tin-silver over tin over nickel over phos bronze (pins 2-4);
RoHS compliant matte tin over nickel over copper (pins 11-12)

パッケージ:

D = 13″ machine-ready reel. EIA-481 embossed plastic tape (250 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).

環境

環境:

RoHS準拠

周囲温度範囲:

–40°C to +125°C

保管温度範囲:

Component: –40°C to +165°C.
Tape and reel Packaging: –40°C to +80°C

最大部品温度:

+165°C (ambient + temp rise)

時間内の障害（FIT）/平均障害間隔（MTBF）:

See FIT/MTBF Calculations

性能曲線

回路図

物理的特徴

テープ＆リール仕様

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)						Orientation
13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
250	330	100	13	38,4	32,4	32	20	4	2	11,2	0,5

一般仕様

コア材料:

Ferrite

重量:

3.8 g

パッケージ:

250/13″ reel; Plastic tape: 32 mm wide, 0.5 mm thick, 20 mm pocket spacing, 11.2 mm pocket depth

はんだ付け/洗浄

湿度感度レベル（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

はんだに対する耐熱性:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。

PCB洗浄:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More Info.

CST2010V Series

SMT Current Sense Transformers

仕様

終端処理:

パッケージ:

性能曲線

回路図

物理的特徴

テープ＆リール仕様

一般仕様

はんだ付け/洗浄

関連製品シリーズ

CS2106 50/60 Hz Current Sense Transformer

High Frequency Current Sense Transformers

CS60 Series

CS60-010

CST1, CST2 – High Frequency

CST1211 Series

CST3015 Series

CST2010 Series SMT

CST2020 Series

CST4835 Series

CST7030 Series

CU8965-AL

D18XX, CS1XXX Series

SCS Series

倉庫

言語の設定

通貨の設定

CST2010V Series

SMT Current Sense Transformers

選択された構成はご購入いただけません

仕様

終端処理:

パッケージ:

性能曲線

回路図

物理的特徴

テープ＆リール仕様

一般仕様

はんだ付け/洗浄

関連製品シリーズ

CS2106 50/60 Hz Current Sense Transformer

High Frequency Current Sense Transformers

CS60 Series

CS60-010

CST1, CST2 – High Frequency

CST1211 Series

CST3015 Series

CST2010 Series SMT

CST2020 Series

CST4835 Series

CST7030 Series

CU8965-AL

D18XX, CS1XXX Series

SCS Series

警告