Datasheet 3Dモデル

HP2-0216

Name: HP2-0216LD
Brand: Coilcraft
SKU: HP2-0216LD
Price: 2.75 USD
Availability: InStock

HP2-0216LD

部品の詳細情報と仕様について

シリーズへ移動

今すぐ購入:

個数	単価
1	$5.88
100	$5.35
250	$3.26
500	$2.90
1000	$2.75
2500	$2.51
5000	$2.29

大量のご注文または在庫のない商品については、お見積もりをご依頼ください。

Termination

L = Tin-silver over tin over nickel

Packaging

D = 13" machine-ready reel

. 在庫あり、即日出荷可能.

サンプルを依頼:

仕様

Electrical specifications at 25°C.

部品番号 1	インダクタンス (µH) 2 (公差: ±20%)	DCR max (mΩ) 3	電圧ー時間製品 (V-µs) 4	ピークエネルギー貯蔵量 (µJ) 5	Isat (mA) 6	Irms (A) 7
HP2-0216L_	11	85.0	30.8	79.2	770	1.1

メモ

When ordering, please specify packaging code: e.g. HPH1-1400LD
Inductance is per winding, measured at 100 kHz, 0.1 Vrms, 0 Adc.
DCR is per winding, measured at 25°C on Cambridge Technology micro-ohmmeter or equivalent. For other operating temperatures,use this DCR at Temperature calculator.
Volt-time product is for a single winding or multiple windings connected in parallel. To calculate volt-time product for windings connected in series, multiply the value specified in the table by the number of windings connected.
Peak energy storage is for any combination of windings, assuming saturation current applied. See note 6 for definition of saturation current.
Isat: DC current at which the inductance drops 30% typ from its value without current, based on current applied to all six windings connected in series. For applications where all windings are not connected in series, use the following equation to calculate Isat: Isat = Isat(table) × 6 ÷ number of windings in series.
Irms: Current that causes a 40°C rise from 25°C ambient due to self heating, tested with continuous current flow through all windings connected in series. Application temperature rise will depend on the operating current, duty cycle, and winding connection.
Part is designed exclusively for use as a forward converter transformer and was not tested for energy storage and saturation current.

終端処理:

L = RoHS compliant tin-silver over tin over nickel over phos bronze.
T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
S = non-RoHS tin-lead (63/37). (Special order, added cost)

パッケージ:

D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.

環境

環境:

RoHS準拠

周囲温度範囲:

−40°C to +85°C with Irms current

保管温度範囲:

Component: −40°C to +125°C
Packaging tape and reel or tray: −40°C to +80°C

最大部品温度:

+125°C (Ambient + temperature rise)

時間内の障害（FIT）/平均障害間隔（MTBF）:

See FIT/MTBF Calculations

物理的特徴

テープ＆リール仕様

	Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)						Orientation
	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T	Orientation
HP2 / HPH2	400	330	100	13	38.4	32.4	32	20	4	2	7.6	0.4

一般仕様

コア材料:

Ferrite

重量:

2.7 – 2.8 g

パッケージ:

400 per 13" reel

はんだ付け/洗浄

湿度感度レベル（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

はんだに対する耐熱性:

Three reflows at >217°C for 90 seconds (+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room temperature between.

はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。

PCB洗浄:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

HP2-0216

HP2-0216LD

仕様

終端処理:

パッケージ:

物理的特徴

テープ＆リール仕様

一般仕様

はんだ付け/洗浄

関連製品

HP2-0066

HP2-0083

HP2-0116

HP2-1600

HPH2-0066

HPH2-0083

HPH2-0116

HPH2-0216

HPH2-1600

関連製品シリーズ

HP1 Series

HP3 Series

HP4 Series

HP5 Series

HP6 Series

倉庫

言語の設定

通貨の設定

HP2-0216

HP2-0216LD

この部品をシェアする

選択された構成はご購入いただけません

仕様

終端処理:

パッケージ:

物理的特徴

テープ＆リール仕様

一般仕様

はんだ付け/洗浄

関連製品

HP2-0066

HP2-0083

HP2-0116

HP2-1600

HPH2-0066

HPH2-0083

HPH2-0116

HPH2-0216

HPH2-1600

関連製品シリーズ

HP1 Series

HP3 Series

HP4 Series

HP5 Series

HP6 Series

警告