Datasheet 3Dモデル

PL140 Series

SMT Planar Transformers

Three different schematics and 15 turns ratios to meet a variety of applications
Rated for 140 Watts output between 200 kHz and 500 kHz
Designed for −48 V input, making them ideal for Intermediate Bus Converters (IBC)
High efficiency, low DCR and low leakage inductance
Can be special ordered with an optional auxiliary winding
Samples are available in Coilcraft Designer's Kit C390

今すぐ購入:

部品番号

部品を検索

サンプルを依頼:

部品番号

部品を検索

デザイナーズキット:

キット	値	価格
C390	6 (2 of each)	$80.00

仕様

Electrical specifications at 25°C.

Two of each part shown in red are included in Designer's Kit C390

部品番号 1 (Hover for schematics)	電力 (W)	入力電圧 (V)	最小インダクタンス (µH) 2	DCR max (mΩ) 3			漏れインダクタンス最大 (µH) 4	巻数比	周波数 (kHz)	絶縁電圧 (Vrms) 5
部品番号 1 (Hover for schematics)	電力 (W)	入力電圧 (V)	最小インダクタンス (µH) 2	Pri	Sec1	Sec2	漏れインダクタンス最大 (µH) 4	Pri : Sec1 : Sec2	周波数 (kHz)	絶縁電圧 (Vrms) 5
PL140-100L_	140	36 — 75	120	24.0	4.0	-	0.35	1 : 0.5 : -	200	1500
PL140-101L_	140	36 — 75	152	32.8	4.0	-	0.35	1 : 0.444 : -	200	1500
PL140-102L_	140	36 — 75	188	41.6	4.0	-	0.35	1 : 0.4 : -	200	1500
PL140-103L_	140	36 — 75	227	48.8	4.0	-	0.35	1 : 0.363 : -	200	1500
PL140-104L_	140	36 — 75	270	56.0	4.0	-	0.45	1 : 0.333 : -	200	1500
PL140-105L_	140	36 — 75	120	24.0	0.5	0.5	0.35	1 : 0.125 : 0.125	200	1500
PL140-106L_	140	36 — 75	152	32.8	0.5	0.5	0.35	1 : 0.111 : 0.111	200	1500
PL140-107L_	140	36 — 75	188	41.6	0.5	0.5	0.35	1 : 0.1 : 0.1	200	1500
PL140-108L_	140	36 — 75	227	48.8	0.5	0.5	0.50	1 : 0.091 : 0.091	200	1500
PL140-109L_	140	36 — 75	270	56.0	0.5	0.5	0.60	1 : 0.083 : 0.083	200	1500
PL140-110L_	140	36 — 75	120	24.0	1.0	1.0	0.35	1 : 0.25 : 0.125	200	1500
PL140-111L_	140	36 — 75	152	32.8	1.0	1.0	0.35	1 : 0.22 : 0.11	200	1500
PL140-112L_	140	36 — 75	188	50.6	1.0	1.0	0.35	1 : 0.2 : 0.1	200	1500
PL140-113L_	140	36 — 75	227	48.8	1.0	1.0	0.35	1 : 0.181 : 0.091	200	1500
PL140-114L_	140	36 — 75	270	56.0	1.0	1.0	0.45	1 : 0.166 : 0.083	200	1500

メモ

When ordering, please specify packaging code: PL140-114LD
Inductance measured on an Agilent/HP 4284 between pins 2 and 4 at 200 kHz, 0.1 Vrms, 0 Adc.
DCR at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
Leakage inductance measured between pins 2 and 4 at 100 kHz, 0.1 Vrms, 0 Adc with all secondary pins shorted.
1500 Vdc isolation primary to secondary.

終端処理:

RoHS-compliant. 260°C compatible. Matte tin over nickel over brass terminations.

パッケージ:

D =13″ machine-ready reel.
EIA-481 embossed plastic tape (200 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use code letter D instead.

補助巻線:

To order a transformer with an optional auxiliary winding, add an “X” and the turn count after the PL140, e.g. PL140X3-100LB.
Turn counts of 2, 3, 4, 5, 7 and 9 are available for the auxiliary winding.
Transformers with auxiliary windings are not stocked. Call for lead time.

環境

環境:

RoHS準拠

周囲温度範囲:

–40°C to +85°C

保管温度範囲:

Component: −40°C to +85°C
Tape and reel packaging: −40°C to +80°C

最大部品温度:

+125°C (ambient + temp rise) Storage temperature Component: –40°C to +85°C.

時間内の障害（FIT）/平均障害間隔（MTBF）:

See FIT/MTBF Calculations

回路図

A	B	C	D	E	F

物理的特徴

テープ＆リール仕様

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)						Orientation
13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
200	330	100	13	50,4	44,4	44	32	4	2	9,3	0,37

一般仕様

コア材料:

Ferrite

重量:

10.9 – 12 g

はんだ付け/洗浄

湿度感度レベル（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

はんだに対する耐熱性:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。

PCB洗浄:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

PL140 Series

SMT Planar Transformers