View:
はじめに
仕様
環境
性能曲線
回路図
物理的特徴
テープ＆リール
はんだ付け/洗浄

3D Model Datasheet

Magnetics

for Texas Instruments LM5025 & LM5034

Specifically developed for use with the Texas Instruments LM5110 Gate Driver and LM5025 Cascaded PWM Controller
Specified by Texas Instruments for use with LM5034 Dual Interleaved Controller
Low profile, high efficiency planar transformer
Planar output choke inductor

今すぐ購入:

部品番号

部品を検索

個数	単価
1	$16.24
1000	$10.52
5000	$8.26

大量のご注文または在庫のない商品については、お見積もりをご依頼ください。

Packaging

D = 13" machine-ready reel

. 在庫あり、即日出荷可能.

サンプルを依頼:

部品番号

部品を検索

一般的な用途

Texas Instruments LM5110, LM5025に対応

出力	電力
3.3 V , 30 A	100 W

仕様

Electrical specifications at 25°C.

Planar Transformer

部品番号 1 (Hover for schematics)	最小インダクタンス (µH) 2	DCR max (mΩ) 3		漏れインダクタンス最大 (µH) 4	絶縁電圧 (Vrms)
部品番号 1 (Hover for schematics)	最小インダクタンス (µH) 2	Pri	Sec	漏れインダクタンス最大 (µH) 4	絶縁電圧 (Vrms)
B0357-BL_	320	55.0	1.0	0.55	1500

Planar Output Inductor

部品番号 5	インダクタンス (µH) 6 (公差: ±10%)	DCR max (Ω) 7		絶縁電圧 (V) 8	Isat (A) 9	Irms (A) 10
部品番号 5	インダクタンス (µH) 6 (公差: ±10%)	Main	Aux	絶縁電圧 (V) 8	Isat (A) 9	Irms (A) 10
B0358-CL_	2.0	0.0020	0.90	1500	32.0	36.0

メモ

When ordering, please specify packaging code: e.g. B0357-BLD
Inductance measured on an Agilent/HP 4284 between pins 1 and 2 at 250 kHz, 0.1 Vrms, 0 Adc.
DCR at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
Leakage inductance measured between pins 1 and 2 at 100 kHz, 0.1 Vrms, 0 Adc with secondary pins shorted.
When ordering, please specify packaging code: e.g. B0358-CLD
Inductance measured on an Agilent/HP 4284 between pins 3 and 4 at 250 kHz, 0.1 Vrms.
DCR measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
Isolation measured from pin 1 to pin 3.
Isat: DC current at which inductance drops 10% (typ) from its value without current. Details
Irms: Current that causes a 40°C temperature rise from 25°C ambient. Details

終端処理:

RoHS-compliant. 260°C compatible. Matte tin over nickel over brass terminations.

パッケージ:

D = 13″ machine ready reel. EIA-481 embossed plastic tape (200 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.

環境

環境:

RoHS準拠

周囲温度範囲:

−40°C to +85°C

保管温度範囲:

Component: −40°C to +85°C
Tape and reel packaging: −40°C to +80°C

時間内の障害（FIT）/平均障害間隔（MTBF）:

See FIT/MTBF Calculations

性能曲線

Inductance vs Current (B0358-C Planar Output Inductor)

Inductance vs Frequency (B0358-C Planar Output Inductor)

回路図

B0357-BL	B0358-CL

物理的特徴

テープ＆リール仕様

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)						Orientation
13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
200	330	100	13	50,4	44,4	44	32	4	2	9,4	0,37

一般仕様

コア材料:

Ferrite

重量:

11.3 g

パッケージ:

200 per 13″ reel Plastic tape: 44 mm wide, 0.37 mm thick, 32 mm pocket spacing, 9.4 mm pocket depth

はんだ付け/洗浄

湿度感度レベル（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT)

はんだに対する耐熱性:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。

PCB洗浄:

Only pure water or alcohol recommended

Magnetics

for Texas Instruments LM5025 & LM5034

一般的な用途