サイトの設定

倉庫
言語の設定
通貨の設定
製品
リソース
ビデオライブラリ
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

PA6512-AE

Z Axis RFID Coil

RoHS準拠
The PA6512-AE z-axis coil is optimized for 13.56 MHz NFC/RFID tag applications and requires 85% less board space compared to antennas designed for a PCB, yet still has 50% of the read distance.
  • Optimized for use for the Z axis in Near Field Communications systems.
  • Evaluation was done using the STMicroelectronics CR95HF NFC Transceiver Reference boardwith the PA6512 connected to the STMicroelectronics M24LRxxE Dynamic NFC/RFID Tag.
  • Requires 85% less board space (123 mm2 vs 800 mm2) compared with antennas designed for a PCB yet still has approximately 50% of the read distance.

今すぐ購入:

The part number you have selected is not available through our online store.

Please click the "Request Quote" button for pricing and more information.

. 在庫あり、即日出荷可能.
サンプルを依頼:

仕様

Electrical specifications at 25°C.

部品番号 1 インダクタンス (µH)
at 100 kHz 2
(公差: ±20%)
読み取り距離
(inch/cm) 3
DCR max (Ω) 4 インダクタンス at
13.56 MHz (µH)
PA6512-AE_ 4.7 1.15 / 2.93 0.028 4.6
メモ
  1. When ordering, please specify packaging code: e.g. PA6512-AED
  2. Inductance measured at 100 kHz using Agilent/HP 4284A impedance analyzer or equivalent.
  3. Read distance measured using the ST Microelectronics CR95HF RF transceiver demo board.
  4. DCR measured at 25°C on a micro-ohmmeter using a Keithley 580 micro-ohmmeter or equivalent. For other operating temperatures, use this DCR at Temperature calculator

終端処理:

  • Tin over nickel over phos bronze

パッケージ:

  • D = 13″ machine-ready reel. EIA-481 embossed plastic tape (1000 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.
環境
環境:
RoHS準拠
周囲温度範囲:
−40°C to +85°C
保管温度範囲:
Component: −40°C to +85°C
Tape and reel packaging: −40°C to +80°C
時間内の障害(FIT)/平均障害間隔(MTBF):

物理的特徴

pa6512d.gif
dims_inches_mm.gif

テープ&リール仕様

tapereel_pl.gif
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_t.gif
1000 330 100 13 30,4 24,4 24 12 4 2 5,8 0,33

一般仕様

コア材料:
Ferrite
重量:
1.1 g
パッケージ:
1000 per 13″ reel Plastic tape: 24 mm wide, 0.33 mm thick, 12 mm pocket spacing, 5.8 mm pocket depth

はんだ付け/洗浄

湿度感度レベル(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
はんだに対する耐熱性:
Three reflows at >217°C for 90 seconds (+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room temperature between.
はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。
PCB洗浄:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

関連製品シリーズ