3D Model Datasheet

4308RV-904

Name: 4308RV-904XGLD
Brand: Coilcraft
SKU: 4308RV-904XGLD
Price: 1.22 USD
Availability: InStock

4308RV-904XJLD, 4308RV-904XGLD

部品の詳細情報と仕様について

シリーズへ移動

今すぐ購入:

個数	単価
1	$1.27
750	$1.22
1500	$1.04
3000	$0.79
6000	$0.63

大量のご注文または在庫のない商品については、お見積もりをご依頼ください。

Tolerance

J = 5%

G = 2%

Termination

L = Silver-palladium-platinum-glass frit

Packaging

D = 13" machine-ready reel

. 在庫あり、即日出荷可能.

サンプルを依頼:

デザイナーズキット:

キット	値	価格
C383	16 (4 of each)	$80.00

仕様

Electrical specifications at 25°C.

部品番号 1	インダクタンス (µH) at 125 kHz 2	公差 (%) 3	Q min	読み取り距離 (inch/cm) 4	感度 (mV/µT) 5	マッチングコンデンサ (pF) 6	DCR max (Ω) 7	SRF typ (kHz) 8	カラーコード
4308RV-904X_L_	900.00	5,2	22	25.98 / 66.0	16.06	1800	21.0	4800	White Black Yellow

メモ

When ordering, please specify tolerance and packaging codes: 4308RV-905XJLD.
Inductance and Q measured using Agilent/HP 4192A impedance analyzer.
Tolerances in bold are stocked for immediate shipment.
Read distance measured using the KEELOQ® Transponder Evaluation Kit part number DM303005 from Microchip. Distance was recorded as the voltage across the resonant circuit dropped below 10 mV.
Sensitivity measured in accordance with Coilcraft application note “Measuring Sensitivity of Transponder Coils.”
Matching capacitor value required for parallel resonant circuit operating at 125 kHz.
DCR measured on micro-ohmmeter.
SRF measured using Agilent/HP 8753D network analyzer

公差:

G = 2%, J = 5%

終端処理:

RoHS compliant silver-palladium-platinum-glass frit.

パッケージ:

D = 13″ machine-ready reel. EIA-481 embossed plastic tape (3000 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.

環境

環境:

RoHS準拠

周囲温度範囲:

–40°C to +125°C

保管温度範囲:

Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C

時間内の障害（FIT）/平均障害間隔（MTBF）:

See FIT/MTBF Calculations

性能曲線

L vs Frequency

Q vs Frequency

物理的特徴

テープ＆リール仕様

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)						Orientation
13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
3000	330	100	13	30,4	24,4	24	8	4	2	2,7	0,3

一般仕様

重量:

230 – 250 mg

パッケージ:

3000 per 13″ reel Plastic tape: 24 mm wide, 0.3 mm thick, 8 mm pocket spacing, 2.7 mm pocket depth

Temperature coefficient of inductance:

+200 to +700 ppm/°C

はんだ付け/洗浄

湿度感度レベル（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

はんだに対する耐熱性:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。

PCB洗浄:

Tested with pure water or alcohol only. More info

4308RV-904

4308RV-904XJLD, 4308RV-904XGLD