BCR-232

These conical inductors are designed for applications up to 40 GHz. For applications up to 6 GHz, consider one of the lower cost 4310LC wideband bias chokes.

部品の詳細情報と仕様について

シリーズへ移動

今すぐ購入:

サンプルを依頼:

仕様

Electrical specifications at 25°C.

部品番号 1	インダクタンス (µH) 2 (公差: ±5%)	DCR max (Ω) 3	Irms (mA) 4
部品番号 1	インダクタンス (µH) 2 (公差: ±5%)	DCR max (Ω) 3	Irms (mA) 4
BCR-232JL_	2.35	1.61	270

メモ

When ordering, please specify termination and packaging codes: e.g. BCR-802JLC
Inductance measured at 10 MHz, 0.1 Vrms, 0 Adc using an Agilent/HP 16193A fixture in an Agilent/HP 4287A LCR meter or equivalent.
DCR measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
Irms: Current that causes a 40°C rise from 25°C ambient. Details

終端処理:

L = Tin-silver-copper over silver-platinum-glass frit.
S = Tin-lead over silver-platinum-glass frit. (Special order, added cost)

パッケージ:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape. Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C.

環境

環境:

RoHS準拠

周囲温度範囲:

–40°C to +85°C with Irms current, +85°C to +125°C with derated current

保管温度範囲:

Component: −40°C to +125°C
Tape and reel packaging: −40°C to +80°C

時間内の障害（FIT）/平均障害間隔（MTBF）:

See FIT/MTBF Calculations

性能曲線

Insertion Loss

Return Loss

Response curves measured in a bias tee configuration with an Agilent/HP 8722ES network analyzer.

物理的特徴

BCR-122

BCR-162,-221,-232,-531,-801

BCR-272,-632,-652

* Pad is for mounting stability only; do not connect to circuit. Connecting to circuit may adversely affect performance.

Dash number	A	B	C	D	E	F
BCR-122	0.105 ±0.010/2,67 ±0,25	0.120 ±0.010/3,05 ±0,25	0.110 ±0.010/2,79 ±0,25	0.030/0,76	0.070/1,78	0.050/1,27
BCR-162, -221, -232, -531, -802	0.150 ±0.010/3,81±0,25	0.220 ±0.010/5,59 ±0,25	0.160 ±0.010/4,06 ±0,25	0.040/1,02	0.150/3,81	0.080/2,03
BCR-272, -632, -652:	0.220 ±0.010/5,59 ±0,25	0.440 ±0.010/11,18 ±0,25	0.220 ±0.010/5,59 ±0,25	0.050/1,27	0.360/9,14	0.140/3,56

Dimensions (inches/millimeters)

テープ＆リール仕様

	Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)
Dash number	7" (178 mm)	A	B	C	D	E	W	P	Po	P1	H	T
122	500	178	60	13	18,4	12,4	12	8	4	2	3,51	0,36
221,162, 232, 531, 802	300	178	60	13	18,4	12,4	12	8	4	2	4,83	0,36
272, 632, 652	200	178	60	13	30,4	24,4	24	12	4	2	6,45	0,33

一般仕様

重量:

-122: 34 mg; -162,-221,-232,-531: 101 mg; -802: 107 mg; -272,-632,-652: 472 mg

はんだ付け/洗浄

湿度感度レベル（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

はんだに対する耐熱性:

Three reflows at >217°C for 90 seconds (+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room temperature between.

はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。

PCB洗浄:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

BCR-232