3D Model Datasheet SPICEモデル SPICE S-Param

0402PA (1005)

High Current Ceramic Chip Inductors

Our 0402PA Series offers excellent current handling – up to 1860 mA – making them ideal for power amplifiers in wireless applications. Very low DCR and very high self-resonant frequencies round out the features for this series.

Designed for power amplifier applications
Exceptionally low DCR
Excellent current handling – up to 1860 mA
Very high self-resonant frequencies – up to 15.2 GHz

今すぐ購入:

部品番号

部品を検索

個数	単価
1	$1.19
200	$0.86
500	$0.58
1000	$0.41
2000	$0.30
4000	$0.24
10000	$0.19

大量のご注文または在庫のない商品については、お見積もりをご依頼ください。

Tolerance

J = 5%

Termination

R = Matte Sn over Ni over Ag-Pt-glass frit

Packaging

W = 7" machine-ready reel

. 在庫あり、即日出荷可能.

サンプルを依頼:

部品番号

部品を検索

デザイナーズキット:

キット	値	価格
C373	7 (20 of each)	$40.00

仕様

Electrical specifications at 25°C.

部品番号 1	インダクタンス (nH) 2	公差 (%) 3	900 MHz		1.7 GHz		SRF min (GHz) 5	DCR max (Ω) 6	Irms (mA) 7
部品番号 1	インダクタンス (nH) 2	公差 (%) 3	L typ	Q typ 4	L typ	Q typ 4	SRF min (GHz) 5	DCR max (Ω) 6	Irms (mA) 7
0402PA-0N8XJR_	0.78	5	0.79	35	0.76	55	15.2	0.018	1860
0402PA-1N9X_R_	1.9	2,5	1.83	50	1.81	73	12.5	0.022	1700
0402PA-3N4X_R_	3.4	2,5	3.36	51	3.33	93	7.2	0.030	1500
0402PA-3N5X_R_	3.5	2,5	3.51	58	3.55	82	8.8	0.035	1400
0402PA-5N8X_R_	5.8	2,5	5.76	56	5.7	83	5.5	0.045	1300
0402PA-6N2X_R_	6.2	2,5	6.17	57	6.28	81	5.0	0.055	1150
0402PA-8N2X_R_	8.2	2,5	8.15	58	8.19	82	4.7	0.060	1100

メモ

When ordering, specify tolerance, termination and packaging codes: 0402PA-8N2XJRW
Inductance measured at 250 MHz using a Coilcraft SMD-F test fixture and Coilcraft-provided correlation pieces with an Agilent/HP 4286 impedance analyzer.
G = 2%, J = 5%
Q measured using an Agilent/HP 4291A with an Agilent/HP 16193 test fixture.
For SRF > 6 GHz, measured using an Agilent/HP 8722ES network analyzer and a Coilcraft SMD-D test fixture. For SRF < 6 GHz, measured using an Agilent/HP 8753D network analyzer and a Coilcraft SMD-D test fixture.
6. DCR measured on a micro-ohmmeter
Current that causes a 15°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.

終端処理:

R = RoHS compliant. Matte Sn over Ni over Ag-Pt-glass frit terminations.

T = RoHS Sn/Ag/Cu (95.5/4.0/0.5) (Special order, added cost)
S = Not RoHS Sn/Pb (63/37) (Special order, added cost)

パッケージ:

W = 7″ machine-ready reel. EIA-481 punched paper tape (2000 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
Y = 7″ machine-ready reel. EIA-481 punched paper tape. Factory order only, not stocked (10000 parts per full reel).
U = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from U to W.

環境

環境:

RoHS準拠 , ハロゲンフリー

周囲温度範囲:

–40°C to +125°C with Irms current

保管温度範囲:

Component: –40°C to +140°C.
Tape and reel packaging: –40°C to +80°C

最大部品温度:

+140°C (ambient + temp rise).

時間内の障害（FIT）/平均障害間隔（MTBF）:

See FIT/MTBF Calculations

性能曲線

L vs Frequency

Q vs Frequency

物理的特徴

A max	B max	C max	D ref	E	F	G	H	I	J
0.047	0.025	0.026	0.010	0.020	0.009	0.022	0.026	0.014	0.018	inches
1,19	0,64	0,66	0,25	0,51	0,23	0,56	0,66	0,36	0,46	mm

Height dimension (C) is before optional solder application.
For maximum height dimension including solder, add 0.006 in / 0,152 mm.

テープ＆リール仕様

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)
7" (178 mm)	A	B	C	D	E	W	P	Po	P1	H	T
2000	178	100	13	14,4	8,4	8	2	4	2	NA	0,68
10000*	178	100	13	14,4	8,4	8	2	4	2	NA	0,68

* Special order

一般仕様

コア材料:

Ceramic

重量:

0.9 – 1.1 mg

パッケージ:

2000 or 10000 per 7″ reel. Paper tape: 8 mm wide, 0.68 mm thick, 2 mm pocket spacing

Temperature coefficient of inductance:

+25 to +125 ppm/°C

はんだ付け/洗浄

湿度感度レベル（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

はんだに対する耐熱性:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。

PCB洗浄:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info

0402PA (1005)

High Current Ceramic Chip Inductors