DR0810 Series

Power Inductors

Coilcraft DR0810 Series radial-leaded power inductors provide a low-cost, high-efficiency option for choke applications. They feature industry-standard lead spacing and are available in a wide range of inductance values and current ratings up to 9.5 Amps.

Industry standard 5 mm lead spacing
PVC sleeve protects the winding
Low-cost ferrite core through-hole (TH) chokes
Wide range of values and current ratings

今すぐ購入:

部品番号

部品を検索

個数	単価
1	$0.70
300	$0.67
600	$0.41
1200	$0.31
3000	$0.29
6000	$0.27

大量のご注文または在庫のない商品については、お見積もりをご依頼ください。

Termination

L = Tin-silver over tin over copper over steel

. 在庫あり、即日出荷可能.

サンプルを依頼:

部品番号

部品を検索

仕様

Electrical specifications at 25°C.

部品番号	インダクタンス (µH) 1	公差 (%)	DCR max (Ω) 2	SRF typ (MHz) 3	Isat (A) 4			Irms (A) 5
部品番号	インダクタンス (µH) 1	公差 (%)	DCR max (Ω) 2	SRF typ (MHz) 3	10% drop	20% drop	30% drop	20°C rise	40°C rise
DR0810-332L	3.3	20	0.010	47.0	8.9	10.2	11.0	7.0	9.5
DR0810-472L	4.7	20	0.012	33.0	7.4	8.5	9.3	6.4	8.8
DR0810-562L	5.6	20	0.020	28.0	6.2	7.4	8.2	5.8	8.1
DR0810-682L	6.8	20	0.020	26.0	5.6	6.7	7.4	5.2	7.4
DR0810-822L	8.2	20	0.020	25.0	5.2	6.2	6.8	4.6	6.7
DR0810-103L	10	10	0.030	23.0	5.1	6.1	6.6	4.0	6.0
DR0810-123L	12	10	0.030	20.0	4.0	4.6	5.1	3.8	5.7
DR0810-153L	15	10	0.040	18.0	3.8	4.5	5.0	3.5	5.3
DR0810-183L	18	10	0.040	15.0	3.5	4.1	4.5	3.3	5.0
DR0810-223L	22	10	0.050	14.0	3.4	4.0	4.4	3.1	4.6
DR0810-273L	27	10	0.070	11.0	3.1	3.7	4.0	2.8	4.3
DR0810-333L	33	10	0.080	10.0	2.9	3.4	3.7	2.6	3.9
DR0810-393L	39	10	0.090	10.0	2.5	2.9	3.2	2.4	3.6
DR0810-473L	47	10	0.10	10.0	2.3	2.7	3.0	2.1	3.2
DR0810-563L	56	10	0.15	8.0	1.9	2.2	2.5	1.9	2.9
DR0810-683L	68	10	0.17	7.0	2.0	2.3	2.5	1.7	2.5
DR0810-823L	82	10	0.20	7.0	1.7	2.0	2.2	1.4	2.2
DR0810-104L	100	10	0.22	6.0	1.5	1.8	2.0	1.2	1.8
DR0810-124L	120	10	0.29	5.0	1.2	1.5	1.6	1.1	1.7
DR0810-154L	150	10	0.34	4.0	1.1	1.4	1.5	1.1	1.6
DR0810-184L	180	10	0.38	4.0	1.1	1.3	1.4	1.0	1.5
DR0810-224L	220	10	0.44	4.0	1.0	1.2	1.3	0.93	1.4
DR0810-274L	270	10	0.62	4.0	0.90	1.1	1.2	0.86	1.3
DR0810-334L	330	10	0.70	4.0	0.88	1.0	1.1	0.80	1.2
DR0810-394L	390	10	0.88	3.0	0.86	0.98	1.0	0.73	1.1
DR0810-474L	470	10	1.0	3.0	0.78	0.90	0.99	0.66	0.97
DR0810-564L	560	10	1.1	2.0	0.72	0.85	0.93	0.60	0.86
DR0810-684L	680	10	1.5	2.0	0.62	0.72	0.79	0.53	0.76
DR0810-824L	820	10	1.7	2.0	0.54	0.67	0.72	0.46	0.66
DR0810-105L	1000	10	2.2	2.0	0.50	0.63	0.69	0.40	0.55

メモ

Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4263B LCR meter or equivalent.
DCR at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
SRF measured using an Agilent/HP 4191A or equivalent. Details
Isat: DC current at 25°C that causes the specified inductance drop from its value without current.
Temperature derating curves.
Irms: Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.

終端処理:

RoHS compliant tin-silver over tin over copper over steel

環境

環境:

RoHS準拠

周囲温度範囲:

−40°C to +85°C with (40°C rise) Irms

保管温度範囲:

Component: −40°C to +125°C
Packaging trays or tape: −40°C to +80°C

最大部品温度:

+125°C (Ambient + temperature rise)

時間内の障害（FIT）/平均障害間隔（MTBF）:

See FIT/MTBF Calculations

性能曲線

Inductance vs Current

Inductance vs Frequency

物理的特徴

一般仕様

コア材料:

Ferrite

重量:

2.0 – 2.7 g

パッケージ:

300 parts per tray. 800 parts in fan-fold tape

はんだ付け/洗浄

湿度感度レベル（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

はんだに対する耐熱性:

Three reflows at >217°C for 90 seconds (+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room temperature between.

はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。

PCB洗浄:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

DR0810 Series

Power Inductors