SD54 Series

Surface Mount Power Inductors

Coilcraft SD54 Series unshielded surface-mount power inductors are mechanically rugged and affordably priced. They offer high current ratings and low DC resistance for greater efficiency.

Open magnetic path design
Cost-effective solution
Ferrite core construction
High saturation current ratings and low DCR

今すぐ購入:

部品番号

部品を検索

個数	単価
1	$1.17
400	$0.94
800	$0.56
1600	$0.44
3200	$0.39
4800	$0.35

大量のご注文または在庫のない商品については、お見積もりをご依頼ください。

Termination

L = Tin-silver over tin over nickel over silver

Packaging

C = 7" machine-ready reel

Tolerance

M = 20%

. 在庫あり、即日出荷可能.

サンプルを依頼:

部品番号

部品を検索

仕様

Electrical specifications at 25°C.

部品番号 1	インダクタンス (µH) 2	公差 (%)	DCR (mΩ) 3		SRF typ (MHz) 4	Isat (A) 5			Irms (A) 6
部品番号 1	インダクタンス (µH) 2	公差 (%)	typ	max	SRF typ (MHz) 4	10% drop	20% drop	30% drop	20°C rise	40°C rise
SD54-103ML_	10	20	-	78.6	28.0	2.0	2.3	2.4	1.7	2.3
SD54-123ML_	12	20	80.2	88.2	26.0	1.8	2.0	2.2	1.6	2.2
SD54-153ML_	15	20	94.0	103	23.0	1.5	1.8	1.9	1.5	2.1
SD54-183ML_	18	20	103	113	21.0	1.4	1.6	1.8	1.4	2.0
SD54-223ML_	22	20	119	130	19.0	1.3	1.5	1.6	1.3	1.8
SD54-273ML_	27	20	134	147	18.0	1.2	1.4	1.4	1.2	1.7
SD54-333ML_	33	20	150	165	16.0	1.1	1.2	1.3	1.2	1.6
SD54-393ML_	39	20	195	214	13.0	1.0	1.1	1.2	1.0	1.4
SD54-473ML_	47	20	222	244	12.0	0.92	1.0	1.1	0.97	1.3
SD54-563KL_	56	10	251	276	11.0	0.83	0.96	1.0	0.92	1.3
SD54-683KL_	68	10	335	368	9.3	0.76	0.88	0.95	0.80	1.1
SD54-823KL_	82	10	379	416	8.4	0.69	0.80	0.85	0.74	1.1
SD54-104KL_	100	10	503	553	7.4	0.62	0.72	0.77	0.64	0.88
SD54-124KL_	120	10	579	636	7.0	0.56	0.66	0.71	0.58	0.80
SD54-154KL_	150	10	654	719	6.3	0.51	0.60	0.64	0.57	0.77
SD54-184KL_	180	10	874	961	5.5	0.46	0.53	0.57	0.49	0.67
SD54-224KL_	220	10	996	1095	5.0	0.43	0.50	0.54	0.47	0.66

メモ

When ordering, please specify packaging code: e.g.SD54-224-KLC
Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP 4284A impedance analyzer or equivalent.
DCR measured at 25°C on a micro-ohmmeter. For other operating temperatures, use this DCR at Temperature calculator.
SRF measured using Agilent/HP 8753D network analyzer and Coilcraft SMD-D test fixture.
Isat: DC current at 25°C that causes the specified inductance drop from its value without current. Temperature derating curves.
Irms: Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.

終端処理:

RoHS compliant tin-silver over tin over nickel over silver.

パッケージ:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (400 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (1500 parts per full reel).
B = In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C.

環境

環境:

RoHS準拠

周囲温度範囲:

−40°C to +85°C with (40°C rise) Irms

保管温度範囲:

Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C

最大部品温度:

+125°C (Ambient + temperature rise)

時間内の障害（FIT）/平均障害間隔（MTBF）:

See FIT/MTBF Calculations

性能曲線

Inductance vs. Current

Inductance vs. Frequency

物理的特徴

テープ＆リール仕様

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
400	1500*	178/330	60/100	13	18,4	12,4	12	8	4	2	4,7	0,4

* Special order

一般仕様

コア材料:

Ferrite

重量:

0.35 – 0.43 g

パッケージ:

400/7″ reel; 1500/13″ reel; Plastic tape: 12 mm wide, 0.4 mm thick, 8 mm pocket spacing, 4.7 mm pocket depth

はんだ付け/洗浄

湿度感度レベル（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

はんだに対する耐熱性:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。

PCB洗浄:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

SD54 Series

Surface Mount Power Inductors