3D Model Datasheet SPICEモデル

LPO4815-333

Name: LPO4815-333KLC
Brand: Coilcraft
SKU: LPO4815-333KLC
Price: 0.69 USD
Availability: InStock

LPO4815-333KLC

部品の詳細情報と仕様について

シリーズへ移動

今すぐ購入:

個数	単価
1	$1.38
250	$1.12
500	$0.90
1000	$0.69
5000	$0.57

大量のご注文または在庫のない商品については、お見積もりをご依頼ください。

Tolerance

K = 10%

Termination

L = Silver-palladium-platinum-glass frit

Packaging

C = 7" machine-ready reel

. 在庫あり、即日出荷可能.

サンプルを依頼:

デザイナーズキット:

キット	値	価格
C376	19 (3 of each)	$55.00

仕様

Electrical specifications at 25°C.

部品番号 1	インダクタンス (µH) 2 (公差: ±10%)	DCR max (Ω) 3	SRF typ (MHz) 4	Isat (A) 5	Irms (A) 6
部品番号 1	インダクタンス (µH) 2 (公差: ±10%)	DCR max (Ω) 3	SRF typ (MHz) 4	Isat (A) 5	Irms (A) 6	40°C rise
LPO4815-333KL_	33	0.71	30.0	0.28	0.65

メモ

When ordering, please specify termination and packaging codes: e.g. LPO4815-224KLC
Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP 4263B LCR meter or equivalent.
DCR measured at 25°C on a micro-ohmmeter. For other operating temperatures, use this DCR at Temperature calculator.
SRF measured using Agilent/HP 4191A or equivalent.
Isat: DC current at 25°C that causes a 10% (typ.) inductance drop from its value without current. Temperature derating curves
Irms: Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.

終端処理:

L = Silver-palladium-platinum-glass frit terminations.
T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
S = non-RoHS tin-lead (63/37). (Special order, added cost)

パッケージ:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (1000 parts per full reel).
B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic tape (3500 parts per full reel).

環境

環境:

RoHS準拠

周囲温度範囲:

–40°C to +85°C with Irms current

保管温度範囲:

Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C

最大部品温度:

+125°C (ambient + temp rise)

時間内の障害（FIT）/平均障害間隔（MTBF）:

See FIT/MTBF Calculations

性能曲線

Inductance vs. Current

Inductance vs. Frequency

物理的特徴

テープ＆リール仕様

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation‡
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
1000	3500*	178/330	60/100	13	18,4	12,4	12	8	4	2	1,6	0,3

* Special order
‡ Part marking does not indicate polarity

一般仕様

コア材料:

Ferrite

重量:

70.0 - 78.5 mg

パッケージ:

1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 1.6 mm pocket depth

はんだ付け/洗浄

湿度感度レベル（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

はんだに対する耐熱性:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。

推奨ピック＆プレースノズル:

OD: 4.6 mm; ID: < 2.3 mm

PCB洗浄:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

LPO4815-333

LPO4815-333KLC