サイトの設定

倉庫
言語の設定
通貨の設定
製品
リソース
ビデオライブラリ
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

DO5010H Series

High Current Surface Mount Power Inductors

RoHS準拠 AEC-Q flag

Coilcraft DO5010H Series unshielded surface-mount power inductors offer proven performance at a great value. They provide high saturation current ratings, high energy storage, and low resistance. 

  • Open magnetic flux path
  • High saturation current ratings
  • High energy storage
  • Industry standard footprint
  • AEC-Q200 Grade 3 (−40°C to +85°C)

今すぐ購入:
個数 単価
1 $2.22
100 $1.91
250 $1.66
500 $1.24
1000 $0.97
2500 $0.77
5000 $0.62

大量のご注文または在庫のない商品については、お見積もりをご依頼ください

. 在庫あり、即日出荷可能.
サンプルを依頼:
デザイナーズキット:
キット 価格
C355 22 (3 of each) $65.00

仕様

Electrical specifications at 25°C.

部品番号 1 インダクタンス (µH) 2
(公差: ±20%)
DCR max (mΩ) 3 SRF typ (MHz) 4 Isat (mA) 5 Irms (A) 6
40°C rise
DO5010H-781ML_ 0.78 2.6 156 30000 15.0
DO5010H-152ML_ 1.5 4.0 100 25000 15.0
DO5010H-222ML_ 2.2 6.1 75.0 20000 12.0
DO5010H-332ML_ 3.3 8.6 60.0 17000 10.0
DO5010H-392ML_ 3.9 10.0 55.0 15000 9.0
DO5010H-472ML_ 4.7 14.0 40.0 13000 8.4
DO5010H-602ML_ 6.0 17.0 35.0 12000 7.5
DO5010H-782ML_ 7.8 18.0 35.0 11000 7.5
DO5010H-103ML_ 10 26.0 28.0 10000 6.0
DO5010H-123ML_ 12 28.0 26.0 8500 5.2
DO5010H-153ML_ 15 32.0 20.0 8000 4.4
DO5010H-223ML_ 22 47.0 20.0 7000 3.5
DO5010H-333ML_ 33 66.0 15.0 5500 3.0
DO5010H-473ML_ 47 86.0 9.0 4500 2.6
DO5010H-683ML_ 68 130 8.0 3500 2.3
DO5010H-104ML_ 100 190 7.0 3000 1.8
DO5010H-154ML_ 150 250 6.0 2600 1.5
DO5010H-224ML_ 220 380 5.0 2400 1.2
DO5010H-334ML_ 330 560 4.0 1900 1.0
DO5010H-474ML_ 470 850 3.0 1400 0.82
DO5010H-684ML_ 680 1100 2.0 1200 0.72
DO5010H-105ML_ 1000 1800 2.0 1000 0.56
メモ
  1. When ordering, please specify termination and packaging codes: e.g. DO5010H-472MLD
  2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4263B LCR meter or equivalent.
  3. DCR measured at 25°C on a micro-ohmmeter. For other operating temperatures, use this DCR at Temperature calculator.
  4. SRF measured using Agilent/HP 8753D network analyzer.  Details
  5. Isat: DC current at 25°C that causes a 10% (typ) inductance drop from its value without current. Temperature derating curves.
  6. Irms: Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.

終端処理:

  • L = RoHS compliant tin-silver (96.5/3.5) over copper.
  • T = RoHS tin-silver-copper (95.5/4/0.5) over copper. (Special order, added cost)
  • S = non-RoHS tin-lead (63/37) over copper. (Special order, added cost)

パッケージ:

  • D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.
環境
環境:
RoHS準拠
周囲温度範囲:
–40°C to +85°C with Irms current, +85°C to +125°C with derated current
保管温度範囲:
Component: −40°C to +125°C
Tape and reel packaging: −40°C to +80°C
最大部品温度:
+125°C (Ambient + temperature rise)
時間内の障害(FIT)/平均障害間隔(MTBF):

性能曲線

Inductance vs Frequency

Inductance vs Current

Irms Derating

物理的特徴

do5010hd.gif
dims_inches_mm-(1).gif

テープ&リール仕様

tapereel_pl-(12).gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation‡
13" (330 mm) A B C D E W P Po P1 H T part_or_t-(9).gif or
part_or_d-(5).gif   
250 330 100 13 38,4 32,4 32 24 4 2 7,8 0,38
‡ Dot or number marking does not indicate polarity

一般仕様

コア材料:
Ferrite
重量:
3.2 – 4.0 g
パッケージ:
250 per 13″ reel Plastic tape: 32 mm wide, 0.38 mm thick, 24 mm pocket spacing, 7.8 mm pocket depth

はんだ付け/洗浄

湿度感度レベル(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
はんだに対する耐熱性:
Three reflows at >217°C for 90 seconds (+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room temperature between.
はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。
PCB洗浄:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

関連製品シリーズ

関連製品ファミリー