DO3316H Series

High Current Surface Mount Power Inductors

Coilcraft DO3316H Series unshielded surface-mount power inductors offer proven performance at a great value. They provide high saturation current ratings, high energy storage, and low resistance.

Open magnetic flux path
High saturation current ratings
High energy storage
Industry standard footprint
AEC-Q200 Grade 3 (−40°C to +85°C)

Need parts for space, military or other critical applications?
See Coilcraft AE563PKA Series | See Coilcraft AT563PKA Series | See Coilcraft ML563PKA Series | See Coilcraft MS563PKA Series

今すぐ購入:

部品番号

部品を検索

個数	単価
1	$1.20
750	$0.97
1500	$0.72
3000	$0.59
6000	$0.53

大量のご注文または在庫のない商品については、お見積もりをご依頼ください。

Tolerance

M = 20%

K = 10%

Termination

L = Tin-silver

Packaging

D = 13" machine-ready reel

. 在庫あり、即日出荷可能.

サンプルを依頼:

部品番号

部品を検索

デザイナーズキット:

キット	値	価格
C326	10 (3 of each)	$40.00

仕様

Electrical specifications at 25°C.

部品番号 1	インダクタンス (µH) 2	公差 (%) 3	DCR max (Ω) 4	SRF typ (MHz) 5	Isat (mA) 6	Irms (A) 7
部品番号 1	インダクタンス (µH) 2	公差 (%) 3	DCR max (Ω) 4	SRF typ (MHz) 5	Isat (mA) 6	Irms (A) 7
DO3316H-121ML_	0.12	20	0.0015	200	28000	17.0
DO3316H-331ML_	0.33	20	0.0020	200	20000	16.0
DO3316H-681ML_	0.68	20	0.0050	200	13000	12.0
DO3316H-102ML_	1.0	20	0.0060	100	11000	10.0
DO3316H-152ML_	1.5	20	0.0080	90.0	9000	9.0
DO3316H-222_L_	2.2	10,20	0.011	80.0	7800	7.4
DO3316H-272_L_	2.7	10,20	0.012	65.0	7000	6.6
DO3316H-332_L_	3.3	10,20	0.014	60.0	6400	5.9
DO3316H-392_L_	3.9	10,20	0.015	50.0	5900	5.3
DO3316H-472_L_	4.7	10,20	0.018	45.0	5400	4.8

メモ

When ordering, please specify tolerance, termination and packaging codes: e.g. DO3316H-472MLD
Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4263B LCR meter or equivalent.
Tolerances in bold are stocked for immediate shipment.
DCR measured at 25°C on a micro-ohmmeter. For other operating temperatures, use this DCR at Temperature calculator.
SRF measured using an Agilent/HP 8753D network analyzer. Details
Isat: DC current at 25°C that causes a 10% (typ) inductance drop from its value without current. Temperature derating curves.
Irms: Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.

公差:

M = 20%, K = 10% (Table above shows stock tolerances in bold.)

終端処理:

L = RoHS compliant tin-silver (96.5/3.5) over copper.
T = RoHS tin-silver-copper (95.5/4/0.5) over copper. (Special order, added cost)
S = non-RoHS tin-lead (63/37) over copper. (Special order, added cost)

パッケージ:

D = 13″ machine-ready reel. EIA-481 embossed plastic tape (750 parts per full reel).
B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead.

環境

環境:

RoHS準拠

周囲温度範囲:

–40°C to +85°C with Irms current

保管温度範囲:

Component: −40°C to +125°C
Tape and reel packaging: −40°C to +80°C

最大部品温度:

+125°C (Ambient + temperature rise)

時間内の障害（FIT）/平均障害間隔（MTBF）:

See FIT/MTBF Calculations

性能曲線

Inductance vs Frequency

Inductance vs Current

物理的特徴

テープ＆リール仕様

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)						Orientation ‡
13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T	or
750	330	100	13	30,4	24,4	24	12	4	2	6,4	0,35

‡ Dot or number marking does not indicate polarity

一般仕様

コア材料:

Ferrite

重量:

0.95– 1.25 g

パッケージ:

750 per 13″ reel Plastic tape: 24 mm wide, 0.35 mm thick, 12 mm pocket spacing, 6.4 mm pocket depth

はんだ付け/洗浄

湿度感度レベル（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

はんだに対する耐熱性:

Three reflows at >217°C for 90 seconds (+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room temperature between.

はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。

PCB洗浄:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

DO3316H Series

High Current Surface Mount Power Inductors