DO1608C Series

Surface Mount Power Inductors

Coilcraft DO1608C Series unshielded surface-mount power inductors offer proven performance at a great value. They provide high saturation current ratings, high energy storage, and low resistance.

Open magnetic flux path
High saturation current ratings
High energy storage
Industry standard footprint
Defense Supply Center CID A-A-59742

Need parts for space, military or other critical applications?
See Coilcraft ST485PKA Series

今すぐ購入:

部品番号

部品を検索

個数	単価
1	$0.99
750	$0.78
1500	$0.60
3000	$0.46
6000	$0.39

大量のご注文または在庫のない商品については、お見積もりをご依頼ください。

Tolerance

M = 20%

Termination

L = Gold over nickel over moly-manganese

Packaging

C = 7" machine-ready reel

. 在庫あり、即日出荷可能.

サンプルを依頼:

部品番号

部品を検索

デザイナーズキット:

キット	値	価格
C377	21 (3 of each)	$60.00

仕様

Electrical specifications at 25°C.

部品番号 1	インダクタンス (µH) 2	公差 (%) 3	DCR max (Ω) 4	SRF typ (MHz)	Isat (mA) 5	Irms (A) 6
部品番号 1	インダクタンス (µH) 2	公差 (%) 3	DCR max (Ω) 4	SRF typ (MHz)	Isat (mA) 5	20°C rise	40°C rise
DO1608C-102ML_	1.0	20	0.05	130	2900	1.9	2.7
DO1608C-152ML_	1.5	20	0.06	115	2600	1.9	2.7
DO1608C-222ML_	2.2	20	0.07	100	2300	1.9	2.6
DO1608C-272ML_	2.7	20	0.08	75.0	2100	1.8	2.5
DO1608C-332ML_	3.3	20	0.08	70.0	2000	1.6	2.2
DO1608C-472ML_	4.7	20	0.09	50.0	1500	1.4	1.9
DO1608C-682ML_	6.8	20	0.13	45.0	1200	1.2	1.6
DO1608C-822ML_	8.2	20	0.16	40.0	1150	1.1	1.6
DO1608C-103ML_	10	20	0.16	35.0	1100	1.1	1.5
DO1608C-153ML_	15	20	0.23	30.0	900	0.90	1.3
DO1608C-223_L_	22	20,10	0.37	20.0	700	0.75	0.95
DO1608C-333_L_	33	20,10	0.51	15.0	580	0.60	0.80
DO1608C-473_L_	47	20,10	0.64	14.0	500	0.52	0.70
DO1608C-683_L_	68	20,10	0.86	11.0	400	0.44	0.60
DO1608C-104_L_	100	20,10	1.27	9.0	310	0.37	0.50
DO1608C-154_L_	150	20,10	2.00	6.0	270	0.28	0.39
DO1608C-224_L_	220	20,10	3.11	5.5	220	0.23	0.31
DO1608C-334_L_	330	20,10	3.80	5.0	180	0.22	0.30
DO1608C-474_L_	470	20,10	5.06	4.0	160	0.20	0.26
DO1608C-684_L_	680	20,10	9.20	3.0	140	0.14	0.19
DO1608C-105_L_	1000	20,10	13.80	2.0	100	0.11	0.15

メモ

When ordering, please specify termination and packaging codes: e.g. DO1608C-105MLC
Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP 4263B LCR meter or equivalent.
Tolerances in bold are stocked for immediate shipment
DCR measured at 25°C on a micro-ohmmeter. For other operating temperatures, use this DCR at Temperature calculator.
Isat: DC current at 25°C that causes a 10% (typ.) inductance drop from its value without current.
Temperature derating curves.
Irms: Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.

公差:

K = 10%, M = 20% (Table shows stock tolerances in bold.)

終端処理:

L = Gold over nickel over moly-manganese terminations.
T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
S = non-RoHS tin-lead (63/37). (Special order, added cost)

パッケージ:

C = 7" machine-ready reel
EIA-481 embossed plastic tape (750 per full reel).
B = Less than full reel
Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C.
D = 13" reel, machine-ready
EIA-481 embossed plastic tape. Factory order only, not stocked (2500 per full reel).

環境

環境:

RoHS準拠

周囲温度範囲:

−40°C to +85°C with Irms current

保管温度範囲:

Component: −40°C to +125°C
Tape and reel packaging: −40°C to +80°C

最大部品温度:

+125°C (Ambient + temperature rise)

時間内の障害（FIT）/平均障害間隔（MTBF）:

See FIT/MTBF Calculations

性能曲線

Inductance vs Frequency

Inductance vs Current

物理的特徴

テープ＆リール仕様

tapereel_pl-(3).gif

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation ‡
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T	or
750	2500*	178/330	60/100	13	18,4	12,4	12	8	4	2	3,0	0,28

* Special order
‡ Dot or number marking does not indicate polarity

一般仕様

コア材料:

Ferrite

重量:

128– 164 mg

パッケージ:

750/7″ reel; 2500/13″ reel Plastic tape: 12 mm wide, 0.28 mm thick, 4 mm pocket spacing, 3 mm pocket depth

はんだ付け/洗浄

湿度感度レベル（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

はんだに対する耐熱性:

Three reflows at >217°C for 90 seconds (+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room temperature between.

はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。

PCB洗浄:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

DO1608C Series

Surface Mount Power Inductors