3D Model Datasheet SPICEモデル SPICE DCDC Tool

DO1605T Series

Low Profile Surface Mount Power Inductors

Coilcraft DO1605T Series unshielded surface-mount power inductors offer proven performance at a great value. They provide high saturation current ratings, high energy storage, and low resistance.

Open magnetic flux path
High saturation current ratings
High energy storage
Industry standard footprint
AEC-Q200 Grade 3 (−40°C to +85°C)

今すぐ購入:

部品番号

部品を検索

個数	単価
1	$1.02
500	$0.82
1000	$0.63
2000	$0.51
5000	$0.46

大量のご注文または在庫のない商品については、お見積もりをご依頼ください。

Tolerance

M = 20%

Termination

L = Silver-palladium-platinum-glass frit

Packaging

C = 7" machine-ready reel

. 在庫あり、即日出荷可能.

サンプルを依頼:

部品番号

部品を検索

デザイナーズキット:

キット	値	価格
C353	20 (3 of each)	$60.00

仕様

Electrical specifications at 25°C.

部品番号 1	インダクタンス (µH) 2 (公差: ±20%)	DCR max (Ω) 3	SRF typ (MHz) 4	Isat (mA) 5	Irms (A) 6
部品番号 1	インダクタンス (µH) 2 (公差: ±20%)	DCR max (Ω) 3	SRF typ (MHz) 4	Isat (mA) 5	Irms (A) 6	40°C rise
DO1605T-102ML_	1.0	0.04	230	2500	2.3
DO1605T-152ML_	1.5	0.06	180	2200	2.1
DO1605T-222ML_	2.2	0.07	140	1800	1.7
DO1605T-332ML_	3.3	0.12	110	1400	1.3
DO1605T-472ML_	4.7	0.15	100	1200	1.1
DO1605T-682ML_	6.8	0.2	80.0	1100	1.0
DO1605T-822ML_	8.2	0.23	70.0	1000	0.95
DO1605T-103ML_	10	0.27	60.0	1000	0.90
DO1605T-153ML_	15	0.35	45.0	800	0.70
DO1605T-223ML_	22	0.54	35.0	600	0.50
DO1605T-333ML_	33	0.74	30.0	500	0.45
DO1605T-473ML_	47	1.1	22.0	450	0.40
DO1605T-683ML_	68	1.6	20.0	350	0.35
DO1605T-104ML_	100	2.3	15.0	300	0.30
DO1605T-154ML_	150	3.5	10.0	250	0.25
DO1605T-224ML_	220	5.7	9.0	200	0.18
DO1605T-334ML_	330	8.2	8.0	160	0.16
DO1605T-474ML_	470	10.8	7.0	140	0.12
DO1605T-684ML_	680	17.2	5.0	120	0.10
DO1605T-105ML_	1000	22.6	4.0	80	0.080

メモ

When ordering, please specify termination and packaging codes: e.g. DO1605T-105MLC
Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP 4263B LCR meter or equivalent.
DCR measured at 25°C on a micro-ohmmeter. For other operating temperatures, use this DCR at Temperature calculator.
For SRF >13 MHz measured using an Agilent/HP 8753D network analyzer. For SRF <13 MHz using Agilent/HP 4192A. Details
Isat: DC current at 25°C that causes a 10% (typ.) inductance drop from its value without current. Temperature derating curves.
Irms: Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.

終端処理:

L = Silver-palladium-platinum-glass frit terminations.
T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
S = non-RoHS tin-lead (63/37). (Special order, added cost)

パッケージ:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (1000 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C.
D = 13″ machine-ready reel. EIA-481 embossed plastic tape (3500 parts per full reel).

環境

環境:

RoHS準拠

周囲温度範囲:

−40°C to +85°C with Irms current

保管温度範囲:

Component: −40°C to +125°C
Tape and reel packaging: −40°C to +80°C

最大部品温度:

+125°C (Ambient + temperature rise)

時間内の障害（FIT）/平均障害間隔（MTBF）:

See FIT/MTBF Calculations

性能曲線

Inductance vs Frequency

Inductance vs Current

物理的特徴

テープ＆リール仕様

Parts per reel		Reel dimensions (mm)				Tape dimensions (mm)						Orientation‡
7" (178 mm)	13" (330 mm)	A	B	C	D	W	P	Po	P1	H	T
1000	3500*	178/330	60/100	13	18,4	12	8	4	2	2,5	0,25

* Special order
‡ Part marking does not indicate polarity

一般仕様

コア材料:

Ferrite

重量:

101 – 110 mg

はんだ付け/洗浄

湿度感度レベル（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

はんだに対する耐熱性:

Three reflows at >217°C for 90 seconds (+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room temperature between.

はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。

PCB洗浄:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

DO1605T Series

Low Profile Surface Mount Power Inductors