サイトの設定

倉庫
言語の設定
通貨の設定
製品
リソース
ビデオライブラリ
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

XGL4015 Series

Ultra-Low Loss Shielded Power Inductors

RoHS準拠 ハロゲンフリー AEC-Q flag
The revolutionary XGL4015 Series by Coilcraft is the epitome of excellence in power inductors. Engineered with cutting-edge technology, these molded power inductors redefine industry standards. With our lowest DC losses and shallow AC losses, they are the ultimate solution for a wide range of DC-DC converters.

The XGL4015 has a wider range of inductance values and improved Irms current ratings. This empowers you to optimize power conversion efficiency and achieve unparalleled reliability. The XGL4015 Series is designed to meet the ever-evolving demands of modern electronic systems, offering unrivaled versatility and adaptability.

These power inductors embody Coilcraft's commitment to innovation, ensuring the highest levels of performance and efficiency.
  • Industry's lowest DCR and ultra-low AC losses 
  • Superior current handling with soft saturation characteristics
  • Wide inductance range from 0.10 –  2.7 µH
  • AEC-Q200 Grade 1 (-40°C to +125°C)
  • RoHS-compliant, halogen free. 260°C compatible. Tin-silver (96.5/3.5) over copper terminations

今すぐ購入:
個数 単価
1 $1.98
100 $1.73
250 $1.30
500 $0.78
1000 $0.61
2500 $0.53
5000 $0.48

大量のご注文または在庫のない商品については、お見積もりをご依頼ください

. 在庫あり、即日出荷可能.
サンプルを依頼:
デザイナーズキット:
キット 価格
C505 12 (3 of each) $45.00
C509 49 (3 of each) $125.00

仕様

Electrical specifications at 25°C. Operating voltage 0 - 80 V

部品番号 1 インダクタンス (µH) 2
(公差: ±20%)
DCR (mΩ) 3 SRF typ (MHz) 4 Isat (A) 5 Irms (A) 6
typ max 10% drop 20% drop 30% drop 20°C rise 40°C rise
XGL4015-101MEC 0.10 1.8 2.2 260 8.9 16.0 24.5 19.0 25.9
XGL4015-121MEC 0.12 2.3 2.8 240 8.8 15.0 22.0 14.8 20.2
XGL4015-221MEC 0.22 3.4 4.1 150 5.9 10.1 15.2 13.0 18.0
XGL4015-301MEC 0.30 4.7 5.7 130 5.5 9.1 12.9 11.0 15.3
XGL4015-471MEC 0.47 6.2 7.5 95 4.4 7.3 10.5 9.6 13.0
XGL4015-521MEC 0.52 8.0 9.6 90 4.3 7.2 10.2 8.8 12.0
XGL4015-681MEC 0.68 8.4 10.1 78 3.6 6.2 9.0 8.1 11.0
XGL4015-821MEC 0.82 12.8 15.4 70 3.4 5.6 7.9 7.4 9.7
XGL4015-102MEC 1.0 15.0 18.0 60 3.0 5.0 7.3 6.5 8.9
XGL4015-152MEC 1.5 19.6 23.6 49 2.7 4.3 6.3 5.4 7.1
XGL4015-222MEC 2.2 30.0 36.0 40 2.0 3.4 4.9 4.5 6.1
XGL4015-272MEC 2.7 40.6 48.8 36 1.9 3.1 4.5 3.8 5.1
メモ
  1. When ordering, please specify termination and packaging codes: e.g. XGL4015-272MEC
  2. Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc.
  3. DCR measured at 25°C on a micro-ohmmeter. For other operating temperature use this DCR at Temperature calculator.
  4. SRF measured using an Agilent/HP 4395A or equivalent
  5. Isat: DC current at 25°C that causes the specified inductance drop from its value without current. Temperature derating curves.
  6. Irms: Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.
    Irms testing was performed on 0.75 inch wide × 0.25 inch thick copper traces in still air. Temperature rise is highly dependent on many factors including pcb land pattern, trace size, and proximity to other components. Therefore temperature rise should be verified in application conditions.

終端処理:

  • E = Halogen free component. RoHS compliant tin-silver over copper terminations.
  • T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
  • S = non-RoHS tin-lead (63/37). (Special order, added cost)

パッケージ:

  • C = 7″ machine-ready reel. EIA-481 embossed plastic tape (1000 parts per reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • D = 13″ machine-ready reel. EIA-481 embossed plastic tape (4000 parts per reel). Factory order only, not stocked.
環境
環境:
RoHS準拠 , ハロゲンフリー
周囲温度範囲:
−40°C to +125°C with (40°C rise) Irms
保管温度範囲:
Component: –55°C to +165°C.
Tape and reel packaging: –55°C to +80°C
最大部品温度:
+165°C (ambient + temp rise).
時間内の障害(FIT)/平均障害間隔(MTBF):

性能曲線

物理的特徴

xgl4015d.gif

 

テープ&リール仕様

tapereel_pl.gif


 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
7" (178 mm) 13" (330 mm) A B C D E W P Po P1 H T part_or_ac.gif
1000 4000* 178/330 60/100 13 18,4 12,4 12 8 4 2 1,78 0,23
* Special order
 

一般仕様

コア材料:
Composite
重量:
0.13 - 0.14 g
パッケージ:
1000/7″ reel; 4000/13″ reel Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 1.78 mm pocket depth

はんだ付け/洗浄

湿度感度レベル(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
はんだに対する耐熱性:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。
PCB洗浄:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

関連製品シリーズ

関連製品ファミリー