3D Model Datasheet SPICEモデル SPICE DCDC Tool

XEL6060 Series

High Current Shielded Power Inductors

Great News! More choices!

See XGL6060 for significantly lower DCR (up to 40% lower) and higher L values (up to 47 µH)

XEL6060 high-performance molded power inductors feature very low AC losses at high frequencies and very low DCR. These rugged inductors are magnetically shielded for high-density power applications and exhibit soft saturation to withstand high peak current.

Low inductance values for high-frequency applications
Very low AC losses at high frequency and very low DCR
Soft saturation to withstand high current spikes
Magnetically shielded
Composite construction minimizes audible buzzing
No thermal aging – perfect for high-temperature applications
AEC-Q200 Grade 1 (−40°C to +125°C) with a 165°C max part temperature

今すぐ購入:

部品番号

部品を検索

個数	単価
1	$2.87
100	$2.52
250	$1.88
500	$1.13
1000	$0.88
2500	$0.76
5000	$0.70

大量のご注文または在庫のない商品については、お見積もりをご依頼ください。

Termination

E = Tin-silver (96.5/3.5) over copper

Packaging

C = 7" machine-ready reel

Tolerance

M = 20%

. 在庫あり、即日出荷可能.

サンプルを依頼:

部品番号

部品を検索

デザイナーズキット:

キット	値	価格
C466	20 (3 of each)	$65.00

仕様

Electrical specifications at 25°C. Operating voltage 0 – 80 V

部品番号 1	インダクタンス (µH) 2 (公差: ±20%)	DCR (mΩ) 3		SRF typ (MHz) 4	Isat (A) 5	Irms (A) 6
部品番号 1	インダクタンス (µH) 2 (公差: ±20%)	typ	max	SRF typ (MHz) 4	Isat (A) 5	20°C rise	40°C rise
XEL6060-331ME_	0.33	2.0	2.2	79.0	30.0	23.6	31.8
XEL6060-561ME_	0.56	2.6	2.9	59.0	23.0	20.6	27.7
XEL6060-821ME_	0.82	3.0	3.3	52.0	20.0	19.1	25.7
XEL6060-102ME_	1.0	3.7	4.1	47.0	20.0	17.2	23.2
XEL6060-152ME_	1.5	4.3	4.7	41.0	19.0	16.0	21.6
XEL6060-222ME_	2.2	6.1	6.7	33.0	16.0	13.4	18.1
XEL6060-272ME_	2.7	6.9	7.6	26.0	13.8	12.6	17.0
XEL6060-472ME_	4.7	13.7	15.0	23.0	11.4	9.0	12.1
XEL6060-682ME_	6.8	20.8	22.9	16.0	7.9	7.3	9.8
XEL6060-822ME_	8.2	22.7	25.0	15.0	7.6	7.0	9.4
XEL6060-123ME_	12	36.7	40.3	12.0	5.8	5.5	7.4
XEL6060-333ME_	33	83.2	91.5	7.8	3.8	3.0	4.1

メモ

When ordering, please specify termination and packaging codes: e.g. XEL6060-133MEC
Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc.
DCR measured at 25°C on a micro-ohmmeter. For other operating temperatures, use this DCR at Temperature calculator.
SRF measured using an Agilent/HP 4395A or equivalent.
Isat: DC current at 25°C that causes the inductance to drop 30% (typ) from its value without current.
Irms: Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.
Irms testing was performed on 0.75 inch wide × 0.25 inch thick copper traces in still air. Temperature rise is highly dependent on many factors including pcb land pattern, trace size, and proximity to other components. Therefore temperature rise should be verified in application conditions.

終端処理:

E = Halogen free component. RoHS compliant tin-silver over copper terminations.
T = RoHS tin-silver-copper (95.5/4/0.5) (Special order, added cost)
S = non-RoHS tin-lead (63/37). (Special order, added cost)

パッケージ:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (250 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (750 parts per full reel).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C.

環境

環境:

RoHS準拠 , ハロゲンフリー

周囲温度範囲:

–40°C to +125°C with (40°C rise) Irms

保管温度範囲:

Component: –55°C to +165°C.
Tape and reel packaging: –55°C to +80°C

最大部品温度:

+165°C (ambient + temp rise)

時間内の障害（FIT）/平均障害間隔（MTBF）:

See FIT/MTBF Calculations

性能曲線

Inductance vs Frequency

Inductance vs Current

物理的特徴

テープ＆リール仕様

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
250	750*	178/330	60/100	13	22,4	16,4	16	12	4	2	3,12	0,4

* Special order

一般仕様

コア材料:

Composite

重量:

1.23 – 1.31 g

パッケージ:

250/7″reel; 750/13″ reel Plastic tape: 16 mm wide, 0.4 mm thick, 8 mm pocket spacing, 6.23 mm pocket depth

はんだ付け/洗浄

湿度感度レベル（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

はんだに対する耐熱性:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。

PCB洗浄:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

XEL6060 Series

High Current Shielded Power Inductors