Datasheet DCDC Tool 3Dモデル

XEL4012V, 4014V High Voltage

Shielded Power Inductors

Exceptionally low DCR and ultra low AC losses for high-switching
frequencies (2 to 5 MHz)
Superior current handling with soft saturation characteristics
Composite construction minimizes audible buzzing
High-voltage rating of 120 V—50% higher than the standard series.
Learn more about Voltage Ratings for Inductors
AEC-Q200 Grade 1 (−40°C to +125°C)
RoHS-compliant, halogen free. 260°C compatible. Tin-silver (96.5/3.5) over copper terminations
For higher Isat ratings, consider our XEL4020V and XEL4030V Series
COTS Plus tin-silver-copper and tin-lead terminations available

今すぐ購入:

部品番号

部品を検索

個数	単価
1	$2.10
100	$1.85
250	$1.38
500	$0.84
1000	$0.65
2500	$0.57
5000	$0.51

大量のご注文または在庫のない商品については、お見積もりをご依頼ください。

Termination

E = Tin-silver (96.5/3.5) over copper

Packaging

C = 7" machine-ready reel

Tolerance

N = 30%

. 在庫あり、即日出荷可能.

サンプルを依頼:

部品番号

部品を検索

仕様

Electrical specifications at 25°C. Operating voltage 0 – 120 V

部品番号 1	インダクタンス (nH) 2	公差 (%)	DCR (mΩ) 3		SRF typ (MHz) 4	Isat (A) 5	Irms (A) 6
部品番号 1	インダクタンス (nH) 2	公差 (%)	typ	max	SRF typ (MHz) 4	Isat (A) 5	20°C rise	40°C rise
XEL4012V-920	92	30	5.2	5.7	279	24.0	11.5	16.5
XEL4012V-221	220	30	9.7	10.6	146	16.0	6.5	9.0
XEL4014V-221	220	20	7.5	9.5	150	18.2	9.0	12.0
XEL4014V-331	330	20	9.9	12.0	110	14.6	6.5	9.0
XEL4014V-561	560	20	16.5	18.4	80	11.6	5.5	7.5
XEL4014V-781	780	20	20.3	22.8	70	9.8	5.0	6.5

メモ

When ordering, please specify packaging code: e.g. XEL4014V-781MEC
Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc.
DCR measured at 25°C on a micro-ohmmeter. For other operating temperatures, use this DCR at Temperature calculator.
SRF measured using an Agilent/HP 4395A or equivalent.
Isat: DC current at 25°C that causes a 30% (typ) inductance drop from its value without current. Temperature derating curves.
Irms: Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.
Irms testing was performed on 0.75 inch wide × 0.25 inch thick copper traces in still air. Temperature rise is highly dependent on many factors including pcb land pattern, trace size, and proximity to other components. Therefore temperature rise should be verified in application conditions.

終端処理:

RoHS compliant, tin-silver over copper.

パッケージ:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape. Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (4000 parts per full reel).

環境

環境:

RoHS準拠 , ハロゲンフリー

周囲温度範囲:

–40°C to +125°C with (40°C) Irms current

保管温度範囲:

Component: –55°C to +165°C
Tape and reel packaging: –55°C to +80°C

最大部品温度:

+165°C (ambient + temp rise)

時間内の障害（FIT）/平均障害間隔（MTBF）:

See FIT/MTBF Calculations

性能曲線

Inductance vs. Frequency

L vs. Current

物理的特徴

テープ＆リール仕様

	Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)
	7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
XEL4012	1500	5000*	178/330	60/100	13	18,4	12,4	12	8	4	2	1,40	0,23
XEL4014	1000	4000*	178/330	60/100	13	18,4	12,4	12	8	4	2	1,78	0,23

* Special order

一般仕様

コア材料:

Composite

重量:

0.11 g

パッケージ:

XEL4012V: 1500/7″ reel; 5000/13″ reel Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 1.40 mm pocket depth
XEL4014V: 1000/7″ reel; 4000/13″ reel Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 1.78 mm pocket depth

はんだ付け/洗浄

湿度感度レベル（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

はんだに対する耐熱性:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。

PCB洗浄:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

XEL4012V, 4014V High Voltage

Shielded Power Inductors