3D Model Datasheet SPICEモデル SPICE DCDC Tool

ZC1818 Series

High Current, High L Shielded Power Inductors

Optimized for the evaluation board STEVAL-L3751V12 from STMicroelectronics
High voltage rating of 75 V – higher than similar parts in the market
Low DCR and soft saturation characteristic for high current applications
AEC-Q200 Grade 1 (–40°C to +125°C)

今すぐ購入:

個数	単価
1	$9.42
150	$7.69
300	$5.77
600	$3.46
1200	$2.69
2400	$2.31
5000	$2.12

大量のご注文または在庫のない商品については、お見積もりをご依頼ください。

Tolerance

M = 20%

Termination

E = Tin-silver (96.5/3.5) over copper

Packaging

D = 13" machine-ready reel

. 在庫あり、即日出荷可能.

サンプルを依頼:

仕様

Electrical specifications at 25°C. Operating voltage 0 — 75 V

部品番号	インダクタンス (µH) 1 (公差: ±20%)	DCR (mΩ) 2		SRF typ (MHz) 3	Isat (A) 4			Irms (A) 5
部品番号	インダクタンス (µH) 1 (公差: ±20%)	typ	max	SRF typ (MHz) 3	10% drop	20% drop	30% drop	20°C rise	40°C rise
ZC1818-AED	8.2	6.0	7.5	10.8	13.3	22.4	30.0	18.0	24.0

メモ

Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc.
DCR measured at 25°C on a micro-ohmmeter. For other operating temperatures, use this DCR at Temperature calculator.
SRF measured using an Agilent/HP 4395A or equivalent.
Isat: DC current at 25°C that causes an inductance drop of 30% (typ) from its value without current. Temperature derating curves.
Irms: Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.
Irms testing was performed on 0.75 inch wide × 0.25 inch thick copper traces in still air. Temperature rise is highly dependent on many factors including pcb land pattern, trace size, and proximity to other components. Therefore temperature rise should be verified in application conditions.

終端処理:

E = Halogen free component. RoHS compliant tin-silver over copper terminations.

パッケージ:

D = 13″ machine-ready reel. EIA-481 embossed plastic tape (150 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).

環境

環境:

RoHS準拠 , ハロゲンフリー

周囲温度範囲:

−40°C to +125°C with (40°C rise) Irms

保管温度範囲:

Component: –40°C to +165°C.
Tape and reel packaging: –55°C to +80°C

最大部品温度:

+165°C (Ambient + temperature rise)

時間内の障害（FIT）/平均障害間隔（MTBF）:

See FIT/MTBF Calculations

性能曲線

L vs Current

L vs Frequency

物理的特徴

テープ＆リール仕様

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)						Orientation
13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
150	330	100	13	38,4	32,4	32	24	4	2	10,26	0,4

一般仕様

コア材料:

Composite

重量:

13.1 g

パッケージ:

150/13″ reel Plastic tape: 32 mm wide, 0.4 mm thick, 24 mm pocket spacing, 10.26 mm pocket depth

はんだ付け/洗浄

湿度感度レベル（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

はんだに対する耐熱性:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。

PCB洗浄:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

ZC1818 Series

High Current, High L Shielded Power Inductors