SLC7530 Series

Shielded Power Inductors

Coilcraft’s SLC7530 Series of high-current shielded power inductors feature sub-milliohm DC resistance and very high current handling. Magnetic shielding and tight DCR tolerances make them ideal for low voltage multi-phase VRM/VRD/EVRD regulators and current sensing circuits.

Sub-milliohm DC resistance and tight DCR tolerance
Ferrite construction for flat L vs I with high current
Magnetic shielding allows high-density packaging
Ideal for multi-phase VRM/VRD/EVRD regulators
AEC-Q200 Grade 3 (−40°C to +85°C)

今すぐ購入:

部品番号

部品を検索

個数	単価
1	$0.95
250	$0.85
500	$0.72
1000	$0.59
2500	$0.52
5000	$0.45

大量のご注文または在庫のない商品については、お見積もりをご依頼ください。

Tolerance

M = 20%

Termination

L = Matte tin over nickel

Packaging

C = 7" machine-ready reel

. 在庫あり、即日出荷可能.

サンプルを依頼:

部品番号

部品を検索

デザイナーズキット:

キット	値	価格
C379	8 (3 of each)	$40.00
C467	40 (3 of each)	$110.00

仕様

Electrical specifications at 25°C.

Single Conductor

部品番号 1	インダクタンス (µH) 2 (公差: ±20%)	DCR ± 5% (mΩ) 3	SRF typ (GHz) 4	Isat (A) 5	Irms (A) 6
部品番号 1	インダクタンス (µH) 2 (公差: ±20%)	DCR ± 5% (mΩ) 3	SRF typ (GHz) 4	Isat (A) 5	Irms (A) 6
SLC7530S-500ML_	0.050	0.123	3.8	50.0	40.0
SLC7530S-640ML_	0.064	0.123	3.7	32.0	40.0
SLC7530S-820ML_	0.082	0.123	3.8	22.0	40.0
SLC7530S-101ML_	0.10	0.123	3.8	20.0	40.0

Dual Conductor

部品番号 1	Leads connected in parallel					Leads connected in series
	L (µH) 2 (±20%)	DCR ± 5% (mΩ) 3	SRF typ (GHz) 4	Isat (A) 5	Irms (A) 6	L (µH) 2 (±20%)	DCR max (mΩ) 3	SRF typ (GHz) 4	Isat (A) 5	Irms (A) 6
	L (µH) 2 (±20%)	DCR ± 5% (mΩ) 3	SRF typ (GHz) 4	Isat (A) 5	Irms (A) 6	L (µH) 2 (±20%)	DCR max (mΩ) 3	SRF typ (GHz) 4	Isat (A) 5	Irms (A) 6
SLC7530D-500ML_	0.050	0.209	3.8	50.0	38.0	0.19	1.000	1.5	21.0	28.0
SLC7530D-640ML_	0.064	0.209	3.7	32.0	38.0	0.27	1.000	1.3	14.0	28.0
SLC7530D-820ML_	0.082	0.209	3.8	22.0	38.0	0.35	1.000	1.2	11.0	28.0
SLC7530D-101ML_	0.10	0.209	3.8	20.0	38.0	0.40	1.000	0.95	8.0	28.0

メモ

When ordering, please specify termination and packaging codes: e.g. SLC7530S-101MLD
Inductance measured at 100 kHz, 0.1 Vrms, using an Agilent/HP 4263B LCR meter or equivalent.
DCR measured at 25°C on a micro-ohmmeter at the points indicated in the diagram. For other operating temperatures, use this DCR at Temperature calculator.
SRF measured using an Agilent/HP 8753ES network analyzer and a Coilcraft SMD-D fixture.
Isat: DC current at 25°C that causes a 20% (typ) inductance drop from its value without current. Temperature derating curves.
Irms: Current that causes 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.

終端処理:

L = RoHS compliant matte tin over nickel over copper.
T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
S = non-RoHS tin-lead (63/37). (Special order, added cost)

パッケージ:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (500 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C.
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (1700 parts per full reel).

環境

環境:

RoHS準拠

周囲温度範囲:

–40°C to +85°C with (40°C rise) Irms current

保管温度範囲:

Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C

最大部品温度:

+125°C (ambient + temp rise)

時間内の障害（FIT）/平均障害間隔（MTBF）:

See FIT/MTBF Calculations

性能曲線

Temperature Rise versus Current

Inductance vs Current

Dual Conductor

Inductance vs Frequency

Dual Conductor

Inductance vs Current

Single Conductor

Inductance vs Frequency

Single Conductor

物理的特徴

Single conductor Dual conductor

テープ＆リール仕様

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
500	1700*	178/330	60/100	13	22,4	16,4	16	12	4	2	3,12	0,33

* Special order

一般仕様

コア材料:

Ferrite

重量:

0.44 – 0.47 g

パッケージ:

500/7″ reel; 1700/13″ reel; Plastic tape: 16 mm wide, 0.33 mm thick, 12 mm pocket spacing, 3.12 mm pocket depth

はんだ付け/洗浄

湿度感度レベル（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

はんだに対する耐熱性:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。

PCB洗浄:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

SLC7530 Series

Shielded Power Inductors