サイトの設定

倉庫
言語の設定
通貨の設定
製品
リソース
ビデオライブラリ
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

MSS1812T Series

High Temperature Power Inductors

RoHS準拠 ハロゲンフリー AEC-Q flag
Coilcraft MSS1812T Series shielded surface-mount power inductors feature low DC resistance and excellent current handling in a wide range of inductance values, making them a cost-effective option for a variety of general-purpose applications. 
  • 7 inductance values from 100 µH to 1000 µH
  • Low-loss ferrite drum core for flat inductance vs current
  • Low DC resistance for greater efficiency
  • Excellent current handling
  • Magnetic shielding allows high-density mounting
  • AEC-Q200 Grade 1 (−40°C to +125°C)​

今すぐ購入:
個数 単価
1 $6.30
175 $5.50
350 $4.13
700 $2.49
1400 $1.92
2800 $1.66
5250 $1.52

大量のご注文または在庫のない商品については、お見積もりをご依頼ください

. 在庫あり、即日出荷可能.
サンプルを依頼:
デザイナーズキット:
キット 価格
C499 7 (3 of each) $45.00

仕様

Electrical specifications at 25°C. Operating voltage 400 V max

部品番号 1 インダクタンス (µH) 2 公差 (%) DCR (Ω) 3 SRF typ (MHz) 4 Isat (A) 5 Irms (A) 6
typ max 10% drop 20% drop 30% drop 20°C rise 40°C rise
MSS1812T-104MED 100 20 0.045 0.052 3.3 5.2 5.8 6.0 2.87 4.35
MSS1812T-154KED 150 10 0.057 0.066 2.8 4.2 4.6 4.8 2.50 3.80
MSS1812T-224KED 220 10 0.086 0.098 2.3 3.6 3.8 4.0 2.09 3.16
MSS1812T-334KED 330 10 0.130 0.150 1.8 2.9 3.1 3.1 1.68 2.55
MSS1812T-474KED 470 10 0.200 0.230 1.35 2.4 2.7 2.8 1.39 2.10
MSS1812T-684KED 680 10 0.240 0.270 1.33 2.0 2.2 2.3 1.24 1.88
MSS1812T-105KED 1000 10 0.450 0.520 0.85 1.7 1.8 1.8 0.93 1.40
メモ
  1. When ordering, please specify termination and packaging codes: e.g. MSS1812T-105KED
  2. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc using a Coilcraft SMD-A fixture in an Agilent/HP 4263B LCR meter or equivalent.
  3. DCR measured at 25°C on a micro-ohmmeter and a Coilcraft CCF858 test fixture. For other operating temperatures, use this DCR at Temperature calculator.
  4. SRF measured using an Agilent/HP 8753D network analyzer and a Coilcraft SMD -D test fixture.
  5. Isat: DC current at 25°C that causes the specified inductance drop from its value without current. Temperature derating curves.
  6. Irms: Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.

終端処理:

  • E = RoHS compliant matte tin over nickel over phos bronze.
  • Q = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
  • P = Non-RoHS tin-lead (63/37). (Special order, added cost)

パッケージ:

  • D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (175 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
環境
環境:
RoHS準拠 , ハロゲンフリー
周囲温度範囲:
–40°C to +125°C with (40°C rise) Irms current.
保管温度範囲:
Component: –40°C to +165°C.
Tape and reel packaging: –40°C to +80°C
最大部品温度:
+165°C (ambient + temp rise)
時間内の障害(FIT)/平均障害間隔(MTBF):

性能曲線

Inductance vs. Current

Inductance vs. Frequency

物理的特徴

mss1812td.gif
dims_inches_mm.gif

テープ&リール仕様

tapereel_pl.gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation ‡
13" (330 mm) A B C D E W P Po P1 H T part_or_o.gif
175 330 100 13 50,4 44,4 44 28 4 2 12,4 0,5
‡ Part marking does not indicate polarity

一般仕様

コア材料:
Ferrite
重量:
11.82 - 13.26 g
パッケージ:
175/13″ reel; Plastic tape: 44 mm wide, 0.5 mm thick, 28 mm pocket spacing, 12.4 mm pocket depth

はんだ付け/洗浄

湿度感度レベル(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
はんだに対する耐熱性:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。
PCB洗浄:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

関連製品シリーズ

関連製品ファミリー