3D Model Datasheet SPICEモデル SPICE DCDC Tool

LPS5050 Series

Shielded Power Inductors

Coilcraft LPS5050 Series surface-mount power inductors offer high performance and offer excellent current handling, low DC resistance, and magnetic shielding for high-density mounting.

Very low DCR; excellent current handling
High inductance values up to 10 mH
AEC-Q200 Grade 1 (-40°C to +125°C)

今すぐ購入:

部品番号

部品を検索

個数	単価
1	$2.58
250	$1.58
750	$0.95
1500	$0.74
3000	$0.63
5000	$0.58

大量のご注文または在庫のない商品については、お見積もりをご依頼ください。

Tolerance

M = 20%

Termination

R = Matte tin over nickel over silver

Packaging

C = 7" machine-ready reel

. 在庫あり、即日出荷可能.

サンプルを依頼:

部品番号

部品を検索

デザイナーズキット:

キット	値	価格
C493	17 (3 of each)	$65.00

仕様

Electrical specifications at 25°C.

部品番号 1	インダクタンス (µH) 2 (公差: ±20%)	DCR max (Ω) 3	SRF typ (MHz) 4	Isat (A) 5			Irms (A) 6
部品番号 1	インダクタンス (µH) 2 (公差: ±20%)	DCR max (Ω) 3	SRF typ (MHz) 4	10% drop	20% drop	30% drop	20°C rise	40°C rise
LPS5050-154MR_	150	0.555	6.3	0.235	0.260	0.280	0.60	0.82
LPS5050-224MR_	220	0.625	4.9	0.195	0.225	0.235	0.56	0.75
LPS5050-334MR_	330	0.935	4.2	0.165	0.185	0.195	0.47	0.63
LPS5050-474MR_	470	1.220	3.4	0.135	0.150	0.160	0.40	0.54
LPS5050-564MR_	560	1.510	3.2	0.125	0.145	0.150	0.35	0.48
LPS5050-684MR_	680	1.760	2.6	0.120	0.135	0.145	0.31	0.42
LPS5050-824MR_	820	2.200	2.2	0.088	0.107	0.115	0.28	0.38
LPS5050-105MR_	1000	2.900	2.2	0.086	0.102	0.110	0.27	0.36
LPS5050-155MR_	1500	4.400	1.7	0.070	0.082	0.088	0.21	0.30
LPS5050-185MR_	1800	4.550	1.7	0.060	0.073	0.080	0.20	0.28
LPS5050-225MR_	2200	5.550	1.4	0.056	0.066	0.072	0.19	0.25
LPS5050-335MR_	3300	8.600	1.2	0.054	0.060	0.064	0.15	0.20
LPS5050-475MR_	4700	12.100	1.0	0.044	0.051	0.054	0.13	0.17
LPS5050-565MR_	5600	15.300	0.89	0.036	0.042	0.046	0.12	0.16
LPS5050-685MR_	6800	19.150	0.77	0.034	0.040	0.043	0.11	0.14
LPS5050-825MR_	8200	21.500	0.71	0.028	0.035	0.038	0.10	0.13
LPS5050-106MR_	10000	23.250	0.62	0.026	0.030	0.034	0.09	0.12

メモ

When ordering, please specify termination and packaging codes: e.g. LPS5050-106MRC
Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP 4192A impedance analyzer or equivalent.
DCR measured at 25°C on a micro-ohmmeter. For other operating temperatures, use this DCR at Temperature calculator.
SRF measured using an Agilent/HP 8753ES or equivalent.
Isat: DC current at which the inductance drops the specified amount from its value without current. Details
Irms: Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.

終端処理:

R = Matte tin over nickel over silver.
Q = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
P = non-RoHS tin-lead (63/37). (Special order, added cost)

パッケージ:

C = 7" machine-ready reel
EIA-481 embossed plastic tape 750 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13" machine-ready reel
EIA-481 embossed plastic tape. Factory order only, not stocked (1000 parts per full reel).

環境

環境:

RoHS準拠 , ハロゲンフリー

周囲温度範囲:

–40°C to +125°C with (40°C rise) Irms current

保管温度範囲:

Component: −40°C to +165°C
Tape and reel packaging: −40°C to +80°C

最大部品温度:

+165°C (Ambient + temperature rise)

時間内の障害（FIT）/平均障害間隔（MTBF）:

See FIT/MTBF Calculations

性能曲線

Inductance vs Frequency

Inductance vs Current

物理的特徴

テープ＆リール仕様

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
750	1000*	178/330	60/100	13	22,4	16,4	16	12	4	2	5,26	0,3

* Special order

一般仕様

コア材料:

Ferrite

重量:

226 – 244 mg

パッケージ:

750/7″ reel; 1000/13″ reel Plastic tape: 16 mm wide, 0.3 mm thick, 12 mm pocket spacing, 5.26 mm pocket depth

はんだ付け/洗浄

湿度感度レベル（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity

はんだに対する耐熱性:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。

推奨ピック＆プレースノズル:

OD: 5 mm; ID: < 2.5 mm

PCB洗浄:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

LPS5050 Series

Shielded Power Inductors