View:
はじめに
仕様
環境
性能曲線
回路図
物理的特徴
テープ＆リール
はんだ付け/洗浄

Datasheet

MSD1048H-224

Name: MSD1048H-224KED
Brand: Coilcraft
SKU: MSD1048H-224KED
Price: 1.03 USD
Availability: InStock

MSD1048H-224KED

部品の詳細情報と仕様について

シリーズへ移動

今すぐ購入:

個数	単価
1	$1.76
200	$1.53
400	$1.34
1000	$1.03
2500	$0.90
5000	$0.81

大量のご注文または在庫のない商品については、お見積もりをご依頼ください。

Tolerance

K = 10%

Termination

E = Matte tin over nickel

Packaging

D = 13" machine-ready reel

. 在庫あり、即日出荷可能.

サンプルを依頼:

仕様

Electrical specifications at 25°C.

部品番号 1 (Hover for schematics)	インダクタンス (µH) 2 (公差: ±10%)	DCR max (Ω) 3	SRF typ (MHz) 4	結合係数	漏れインダクタンス (µH) 5	巻数比	Isat (A) 6	Irms (A)
部品番号 1 (Hover for schematics)	インダクタンス (µH) 2 (公差: ±10%)	DCR max (Ω) 3	SRF typ (MHz) 4	結合係数	漏れインダクタンス (µH) 5	巻数比	Isat (A) 6	両方の巻線 7	単一巻線 8
MSD1048H-224KE_	220	0.920	5.0	>0.99	1.2	1 : 1	0.90	0.45	0.70

メモ

When ordering, please specify termination and packaging codes: e.g. MSD1048H-224KED
Inductance shown for each winding, measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR meter or equivalent. When leads are connected in parallel, inductance is the same value. When leads are connected in series, inductance is four times the value.
DCR is for each winding. When leads are connected in parallel, DCR is half the value. When leads are connected in series, DCR is twice the value.
SRF measured using an Agilent/HP 4191A or equivalent. When leads are connected in parallel, SRF is the same value.
Leakage Inductance is for L1 and is measured with L2 shorted.
DC current at 25°C that causes a 30% (typ) inductance drop from its value without current. It is the sum of the current flowing in both windings.
Equal current when applied to each winding simultaneously that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. To predict temperature rise go to online calculator.
Maximum current when applied to one winding that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. To predict temperature rise go to online calculator.

終端処理:

E = RoHS compliant matte tin over nickel over phos bronze.
Q = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
P = non-RoHS tin-lead (63/37). (Special order, added cost)

パッケージ:

D = 13″ machine-ready reel. EIA-481 embossed plastic tape. (800 parts per full reel).

環境

環境:

RoHS準拠 , ハロゲンフリー

周囲温度範囲:

–40°C to +125°C with Irms current.

保管温度範囲:

Component: –40°C to +165°C.
Tape and reel packaging: –40°C to +80°C

最大部品温度:

+165°C (ambient + temp rise).

時間内の障害（FIT）/平均障害間隔（MTBF）:

See FIT/MTBF Calculations

性能曲線

Inductance vs Current

Inductance vs. Frequency

回路図

物理的特徴

テープ＆リール仕様

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)						Orientation
13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
800	330	100	13	30,4	24,4	24	16	4	2	5,1	0,35

一般仕様

コア材料:

Ferrite

重量:

1.5– 1.8 g

パッケージ:

800/13″ reel Plastic tape: 24 mm wide, 0.35 mm thick, 16 mm pocket spacing, 5.1 mm pocket depth

Winding to Winding Isolation:

200 Vrms, one minute

はんだ付け/洗浄

湿度感度レベル（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

はんだに対する耐熱性:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。

PCB洗浄:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info

MSD1048H-224

MSD1048H-224KED